• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.357-364
• /
• 2009

We investigate a method for the electrochemical preparation of titanium dioxide/carbon nanotube ($TiO_2$/CNT) composites involving the electroplating of Ti in a titanium n-butoxide (TNB) electrolyte into a CNT matrix. The BET surface areas of $TiO_2$/CNT composites decreased as electrochemical operating time increased. Changes in XRD patterns showed a typical anatase type on the $TiO_2$/CNT composite prepared with a CNT matrix by the electroplating method in the TNB solution. In SEM micrographs, the titanium complex particles were uniformly distributed on the CNT surface. The results of chemical elemental analysis for the $TiO_2$/CNT composites showed that most of the spectra for these samples produced stronger peaks for carbon and Ti metal than those of any other element. Finally, the prominent photoelectrocatalytic (PEC) activities of the $TiO_2$/CNT composites could be attributed to the combined effects of photodegradation of $TiO_2$, electron assistance of CNT and the application of a sufficient voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.455-455
• /
• 2011

탄소나노튜브(CNT)는 우수한 전기적, 화학적, 기계적 특성으로 인해 전자기술 분야에 있어서 많은 응용이 가능한 나노소재로 각광을 받고 있으며, 실질적으로 CNT를 이용하여 트렌지스터, 전계방출원, 이차 전지 등으로의 응용연구가 진행되고 있다. 일반적으로 CNT 합성을 위해 전이금속의 촉매가 필요하며 또한 촉매가 나노입자로 형성이 되어야 CNT 합성이 가능하다. 기존에는 CNT 합성기판으로 실리콘 웨이퍼 위에 완충층(buffer layer)과 촉매층을 증착하여 사용하였다. 완충층은 촉매가 기판의 내부로 확산하는 것을 막아주며, 촉매의 나노입자 형성을 원활히 함으로 고효율 합성과 구조제어를 가능하게 한다. 그러나 사용되는 완충층은 알루미나 또는 실리콘 산화막과 같은 절연막이기 때문에 CNT 고유의 우수한 전기전도도를 그대로 이용할 수 없다는 문제가 있다. 그러므로 보다 폭넓은 응용을 위해서는, 완충층의 사용없이 전기전도도가 좋은 금속기판에서 CNT를 직접 합성시키는 것이 중요하며, 이때 적절한 크기의 촉매 나노입자를 형성시키기 위한 각종 표면처리법 등이 현재까지 연구되어 왔다. 본 연구에서는 Inconel 600 합금을 합성기판으로 하여 CNT의 고효율 합성에 대하여 연구하였다. 촉매의 나노입자 형성을 위하여 고온 산화처리 및 플라즈마 이온조사처리 등을 실시하였으며, CNT의 고효율 합성에 미치는 영향을 조사하였다. 결과로서, 두 종류의 전처리를 혼합하여 처리한 Inconel 600 기판에서 높은 밀도의 미세한 나노입자가 형성되었고, CNT의 고효율 합성까지 얻을 수 있었다. 이는 Inconel 600 고유의 표면산화특성 및 플라즈마 이온조사에 따른 표면구조 변화가 그 원인으로 사료된다. 발표에서는 고효율 합성결과 및 합성기전에 대하여 보다 자세히 토의하고자 한다.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.413-416
• /
• 2014

The effects of an addition of CNT on the sensing properties of nano ZnO:CNT-based gas sensors were studied for $H_2S$ gas. The nano ZnO sensing materials were grown by a hydrothermal reaction method. The nano ZnO:CNT was prepared by ball-milling method. The weight range of the CNT addition on the ZnO surface was from 0 to 10%. The nano ZnO:CNT gas sensors were fabricated by a screen-printing method on alumina substrates. The structural and morphological properties of the ZnO:CNT sensing materials were investigated by XRD, EDS, and SEM. The XRD patterns revealed that nano ZnO:CNT powders with a wurtzite structure were grown with (1 0 0), (0 0 2), and (1 0 1) dominant peaks. The size of the ZnO was about 210 nm, as confirmed by SEM images. The sensitivity of the nano ZnO:CNT-based sensors was measured for 5 ppm of $H_2S$ gas at room temperature by comparing the resistance in air with that in target gases.

• Composites Research
• /
• v.34 no.2
• /
• pp.123-128
• /
• 2021

This paper dealt with multi-scale natural frequency characteristics of wavy CNT (carbon nanotube) reinforced composites by applying the Mori-Tanaka method, rule of mixture, and Halpin-Tsai equation. By compelling benefit of an ad-hoc Eshelby tensor, the load-transfer characteristics of CNT with a waviness implanted in the polymer matrix was determined. The numerical results obtained are in good agreement with those reported by other investigators. Furthermore, the new results reported in this paper show the interactions between CNT weight, waviness ratios and layup sequences of laminated composites. Key observation points are discussed and significant considerations are given in practical designing of CNT reinforced composites.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.1
• /
• pp.86-91
• /
• 2021

In order to save the energy in vehicles using renewable energy, it is necessary to reduce the weight of parts with polymer matrix composites. Carbon nanotube (CNT) is the nano-scale reinforcement used to increase the interlaminar strength of fiber reinforced composites or enhance the fracture toughness of polymer. However, since the degree of improvement in mechanical properties varies according to the various experimental conditions such as shape of reinforcement, types of matrix and dispersion of reinforcement, research to find the optimal conditions is essentially needed. In this study, CNT/epoxy composites with different CNT concentration were fabricated under the same conditions, and the optimal CNT content (2 wt%) was found through Mode 1 fracture toughness test. Furthermore, through optical microscopy, it was confirmed that the fracture toughness was rather decreased due to the CNT aggregation when the CNT content exceeded 2 wt%.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.127-133
• /
• 2022

Two types of charged particle-type electronic paper display panels with electrodes using ITO and CNT are fabricated to compare durability and electro-optical characteristics. The sheet resistance of the ITO electrode is 10 (ohm/sq.), and the sheet resistance of the CNT electrode is 300, 600, 1000 (ohm/sq.), and durability is carried out by impact and flexibility measurements. Variation in case of the ITO electrode begins at shocks of 40 times and curvature radius of 10 mm, and no change is observed in the CNT electrode. The driving voltage, electric field required for particle movement, reflectivity, and response time measurements show similar results for all ITO and CNT electrodes.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.26-31
• /
• 2007

A surface treatment was performed after the screen printing of a carbon nanotube paste for obtaining the carbon nanotube field emission array(CNT FEA) on the soda-lime glass substrate. In this experiment, Ar ion bombardment was applied as an effective surface treatment method. After making a cathode electrode on the glass substrate, photo sensitive CNT paste was screen-printed, and then back-side was exposure by uv light. Then, the exposed CNT paste was selectively remained by development. After post-baking, the remained CNT paste was bombarded by accelerated Ar ions for removing some binders and exposing only CNTs. As results, the field emission characteristics were strongly depended on the accelerating energy. At 100 eV, the emission was highest and as the acceleration energy increases more then 100 eV, the emission decreased. This was due to the removal of CNT itself as well as binders.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.12
• /
• pp.873-878
• /
• 2014

The applicability of carbon nanotube (CNT) to slow sand filtration for the removal of bacteria was studied using scanning electron microscope and column experiments. The morphology of CNT were investigated using scanning electron microscope and the CNT looked like a skein serving bacteria favorable site for adhesion. Column experiments were performed over a range of CNT filter depth, pH, and ionic strength. Bacteria removal efficiency was found to increase from 44.15% to 99.95% as the CNT filter depth increased from 1 cm to 5 cm, and 3 cm of CNT filter depth was required for significant removal of bacteria. pH increase from 5.5 to 8.5 decreased the bacteria removal efficiency, due to the electrostatic repulsion between bacteria and CNT at higher pH. Bacteria removal efficiency decreased from 97.25% to 70.90% as the ionic strength increased from 0 mM to 50 mM. This study demonstrated that the CNT can be applied to slow sand filtration for treating microbially contaminated water.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.109-113
• /
• 2011

${\alpha},{\omega}$-Hydroxypropylpoly(dimethylsiloxane) was prepared from the reaction of a ${\alpha},{\omega}$-hydrogen polydimethylsiloxane with an allyl alcohol. MPE-g-poly(dimethylsiloxane) copolymer (MPES) was prepared from the graft copolymerization of MPE with ${\alpha},{\omega}$-hydroxypropyl group terminated PDMS. MPES/HDPE/EtO-CNT need to varify was prepared from the compounding of MPES, HDPE, and surface treated MWCNT with 4-ethoxybenzoic acid at $180^{\circ}C$. Melting point of the MPES/HDPE/EtO-CNT composite was decreased from 130 to $129^{\circ}C$ as increasing the content of MWCNT 10 to 20 wt% in the composite PTC characteristic of the MPES/HDPE/EtO-CNT composite was appeared at $120^{\circ}C$ as abruptly increasing the electrical resistivity at this temperature. The heighest PTC intensity of MPES/HDPE/EtO-CNT compsite at 10 wt% loading of EtO-CNT was 1.9.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.489-497
• /
• 2022

In this study, the fluidity, mechanical properties and microstructure of cement pastes with carbon nanotube (CNT) were experimentally investigated. The 6 types of cement paste mixes with different PCE:CNT and w/b had been manufactured, and several tests including flow, compressive strength, absorption and water porosity were performed on cement pastes with or without CNT.Additionally, microstructural observations such as x-ray diffraction (XRD) and scanning electron microscopy (SEM) were carried out to examine hydrates formed in cement paste with CNT. As a result, it was found that the performance of cement pastes with CNT was better compared to that of control cement paste (OPC) due to both of hydration acceleration effect and filling effect. Furthermore, the SEM images clearly showed that CNT can bridge cracks formed in cement matrix. Conclusively, it is believed that the CNT, if mixed appropriately, could be an option as nono-materials to improve performance of concrete structures.