• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.258-261
• /
• 2009

In this work we present a process to fabricate lowtemperature polysilicon (LTPS) TFTs on polyimide (PI) layers, spin-coated on Si-wafer used as rigid carrier. This process has been then used to fabricate elementary circuits as well as circuits for sensor applications.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.81-85
• /
• 2001

The aim of this study was to evaluate on the removal effect of total nitrogen and posphorus in municipal wastewater by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process using influent as a Carbon Source. CNR(Cilium Nutrient Romoval) is the process combining $A^2$/O process with cilium media of H2L corporation. The removal efficiencies for BOD$_{5}$, T-N and T-P were 81.1%, 61.4%, 61.4%, respectively. The removal efficiency of nitrogen and posphorus were low by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process.s.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.98-102
• /
• 2000

The aim of this study was to evaluate on the removal effect of total nitrogen in municipal wastewater by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process. CNR-A(Cilia Nutrient Removal) is the process combining A2/O process with cilium media of H2L corporation. The removal efficiencies for T-N were 63.1% in A-1 reactor, and 73.5% in A-2 reactor and 77.0% in A-3 reactor. The specific nitrification(g-NH3-N/g-MLVSS.d) of Oxic in CNR-A process was 0.07-0.32. The specific denitrification in Anoxic and the specific nitrification inOxic was higher in HRT 4 hour because of optimum F/M ratio.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.112-118
• /
• 2001

The aim of this study was to evaluate on the removal effect of total nitrogen and phosphorus in municipal wastewater with temperature change from 1$0^{\circ}C$ to 24$^{\circ}C$ in CNR(Cilia Nutrient Removal) process. CNR process is the process combining $A^2$/O process with cilium media of H2L company. The removal efficiencies for T-N were found to be 57.9% at 1$0^{\circ}C$ below, 53.7% at 10-2$0^{\circ}C$, 52.2%at 20-24$^{\circ}C$ and 44.4% over 24$^{\circ}C$ respectively. The removal efficiencies for T-P were 53.3% at 1$0^{\circ}C$ below, 59.1% at 10-2$0^{\circ}C$, 72.4% at 20-24$^{\circ}C$ and 50.0% over 24$^{\circ}C$ respectively. The specific nitrification rate (kg NH$_3$-N/kg MLSS.d) of Oxic basin was 0.088 and 0.053 at 1$0^{\circ}C$ below, 0.077 at 10-2$0^{\circ}C$, 0.097 at 20-24$^{\circ}C$ and 0.088 over 24$^{\circ}C$ respectively. The specific denitrification rate (kg NH$_3$-N/kg MLSS.d) in anaerobic and anoxic was 0.013, 0.008 respectively.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.307-328
• /
• 2015

The increasing demand for materials, energy and products drives chemical engineers to propose new solutions everyday able to promote development while supporting sustainable industrial growth. Membrane engineering can offer significant assets to this development. Here, they are identified the most interesting aspects of membrane engineering in strategic industrial sectors such as water treatment, energy production and depletion and reuse of raw materials. The opportunity to integrate membrane units with innovative systems to exploit the potential advantages derived from their synergic uses is also emphasized. The analysis of the potentialities of these new technologies is supported by the introduction of process intensification metrics which provide an alternative and innovative point of view regarding the unit performance, highlighting important aspects characterizing the technology and not identified by the conventional analysis of the unit performance.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.42-47
• /
• 2012

Followed by a paper on the Pig and Bone orthopedic prosthetic, this experiment using Phantom and Bone MRI imaging I, II of orthopedic prosthetic metal effect combines magnetic resonance imaging on metal signal-to-noise ratio(Signal to noise : SNR) and CNR(Contrast to noise: CNR), fat signal suppression(Fat-suppression) images was compared. Specimen trees to measure the reliability of the experimental reproducibility tests and statistical analysis using the SPSS statistical package was applied program SPSS(IBM SPSS Statistice 19) by * P = 0.000 < significance level $({\alpha})$ = 0.01 as a significant there was a correlation(** P < 0.01). SNR and CNR results did not directly proportional to the Titanium, Stainless, Clip CNR and fat signal suppression of the order of images of blood specimens was found to be close to the image. The impact of orthopedic prosthetic metals on magnetic resonance imaging in the diagnostic value of Titanium is relatively high and are meant more.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.222-229
• /
• 2020

Membrane assisted condenser is an innovative membrane operation that exploits the hydrophobic nature of microporous membranes to promote water vapor condensation and recovery. It can be used for water and chemicals recovery from waste gaseous streams. In this work, the testing of membrane condenser for water and ammonia recovery from synthetic streams (i.e., a saturated air stream with ammonia) simulating the plume of cooling tower is illustrated. The modeling of the process was carried out for predicting the membrane-based process performance and for identifying the minimum operating conditions for effectively recovering liquid water. The experimental data were compared with the results achieved through the simulations showing good agreement and confirming the validity of the model. It was found that the recovery of water can be increased growing the temperature difference between the plume and the membrane module (DT), the relative humidity of the plume (RH^plume) and the feed flow rate on membrane area ratio. Moreover, the concentration of NH₃ in the recovered liquid water increased with the growing DT, at increasing NH₃ concentration in the fed gaseous stream and at growing relative humidity of the feed.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.715-723
• /
• 2020

요추 자기공명 검사 시 병변 호발 부위인 Lumbar 4-5번, Sacrum 1번의 축상 영상 검사에서 인접한 두 그룹의 슬라이스 겹침으로 Cross-Talk 인공물이 발생한다. 이로 인해 병변 판독 시 문제점이 발생한다. 본 연구에서는 최적의 분할 TR의 적용을 통해서 Cross-Talk 인공물을 완벽히 제거하고자 한다. 관심 영역은 지방(ROI 1), 척추 기립근 바깥쪽(ROI 2), 척추 기립근 안쪽(ROI 3), 가시돌기(ROI 4)로 나눠 평균화하여 계측하였다. 신호 강도(SI)는 ROI 1의 경우 C4에서 163.43 ± 25.08, ROI 2, ROI 3은 C6에서 각각 67.89 ± 11.75, 69.99 ± 10.91, ROI 4는 C5에서 70.65 ± 27.21을 나타내었다(p<0.000). 신호 대 잡음 비(SNR)는 분할 TR 6에서 SNR 1, 2, 3, 4 값이 각각 135.45 ± 35.90, 56.92 ± 15.90, 58.77 ± 15.59, 54.91 ± 118.95로 나타났다(p<0.000). 대조도 대 잡음비(CNR)는 분할TR 6에서 CNR1, CNR2, CNR3, 값이 각각 78.52 ± 24.11, 76.67 ± 24.38, 80.54 ± 26.33로 나타났다(p<0.000). 시간 대비 최적의 분할 TR 값은 6이며, 이를 T1 축상면 영상에 적용한다면 인공물 저감화에 도움이 되리라고 판단된다.

• 환경기술인
• /
• 제18권통권188호
• /
• pp.70-75
• /
• 2002

1999년부터 2001년까지 2년동안 G-7 환경공학기술개발사업의 일환으로 CNR공법을 이용한 하수처리장의 탈질$\cdot$탈인을 위한 상용화기술개발연구의 결과를 요약하면 다음과 같다. CNR공법은 우리나라의 일반적인 하수성상에서 6시간의 체류시간에서도 운전관리가 원활하면 동절기와 유기물 부하변동에도 질소를 10mg/l, 인을 1mg/l로 제거 할 수 있는 공법이다. CNR공법은 현재 하수처리장의 활성슬러지조내의 용적과 체류시간을 그

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.105-111
• /
• 2006

Coating the fibre surface by in situ oxidative chemical polymerisation of polypyrrole (using $FeCl_3$ as oxidant) is a readily industrial applicable way to give electrical properties to wool with good ageing stability [1], although pre-treatments are required to avoid damage of the cuticle surface due to the acidic condition of the process. FT-IR and EDX analysis reveal that organic sulphonates and sulphates, used as dopants, are absorbed by wool, while chlorine ions are preferably embedded on the polypyrrole layer. The resulting electrical conductivity seems mainly due to the presence of chlorine as counter-ion of polypyrrole; nevertheless, the presence of arylsulphonate in the polymerisation bath increases the electrical conductivity of the coating layer.