• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2010

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1165-1182
• /
• 2011

The evaluation of potential submarine groundwater is an important research topic for exploring an alternative water resource. Two different approaches, water budget analysis and Rn mass balance method, were employed to investigate the annual variation of submarine groundwater discharge in 2010 at a marine watershed located at the south-eastern part of Korean Peninsula. In order to obtain reliable hydrological data during study period, temporal and spatial variations of rainfall and soil moisture had been collected and hydro-meterological data such as temperature, humidity and wind speed were collected The runoff response was simulated using SCS-CN method with spatial distributions of landuse and soil texture from GIS analysis. Six different methods were used to estimate the monthly variation of evapotranspiration and field measurements of soil moisture were used to account for the infiltration. Comparisons of infiltration and surface runoff between simulation and water balance with measurements showed coincidence. The water budget analysis and Rn mass balance method provide mean daily submarine groundwater as 5.35 and 4.07 $m^3/m/day$ in 2010, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.65-73
• /
• 2004

In this paper, we propose a tunnel establishment scheme using Next Hop Resolution Protocol over mobile IP networks, which consist of LAN-based IP networks and ATM-based IP networks. As a basic idea, we use the shortest path algorithm to establish a short-cut tunnel between HA and FA. Also, we classify methods for establishing a short-cut tunnel into four cases considering the locations of HA, FA, CN and MN. To confirm the advantages of our schemes, which deliver packets using short-cut tunnel in optimized path method over mobile IP networks, we performed mathematical analysis and simulation, compared proposed schemes with existing IP routing method in terms of transmission delay between CN and MN. The simulation results show that our scheme have superior performance to that of existing IP routing mechanism, because the store-and-forward delay which occurred in IP routing mechanism is considerably reduced in short-cut tunnel over ATM networks.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.307-310
• /
• 2003

The purpose of this study was to obtain optimal amount of groundwater development for a rural small watershed. The optimal amount of groundwater development in this experimental watershed is 13.8 %($0.67{\times}10^6m^3$) of the annual rainfall by SCS-CN method. The Visual MODFLOW analyses showed the optimal amount of groundwater development were 14.9 %($0.72{\times}10^6m^3$) of the annual rainfall.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.397-399
• /
• 2003

2001년 이후 Car Navigation System(이하 CNS)을 장착한 차량이 급증하는 가운데 많은 기업들이 차량의 위치 오차를 최소화 시키는 노력에 힘쓰고 있다. 본 논문은 CNS에서 발생되는 차량의 위치 오차를 최소화하기 위한 일환으로 GPS(Global Positioning System) 위성으로부터 계산되어진 차량의 위치 좌표와 차량의 실제(true) 좌표간의 오차를 보정하여 디스플레이(display) 상의 오류를 방지할 수 있는 맵매칭(map­matching)방법을 제시한다.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.309.1-309.1
• /
• 2003

The purposes of this study were to evaluate bioequivalence (BE) using In-transformed pharmacokinetic parameters obtained from two risperidone products and to develop the analytical methods for the quantitative determination of risperidone in human serum. In addition, the in vitro dissolution profiles of the two risperidone products in various dissolution media: pH 1.2, 4.0, 6.8 and water (KP VII Apparatus II method) were assesed. (omitted)

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.12 no.4
• /
• pp.219-226
• /
• 1983

Cyclic heating performance of 3 ton air-to-air unitary heat pump installed in a residence in the Washington, D.C. area was determined by applying the bin method to field test result. Cyclic degradation coefficient Cn of heat pump may be expressed in terms of heating load factor HLF as the following : $$C_D=\frac{1-HLF^m}{1-HLF}$$ where $$C_D{\ge}m$$ The less is the value of exponent m, the better is, the performance of a heat pump, depending upon the heat pump design.

• Journal of computational fluids engineering
• /
• v.9 no.1
• /
• pp.18-24
• /
• 2004

The unified simulation for the multiphase flow by predictor-corrector scheme based on CIP method is introduced. In this algorithm, the interface between different phases is identified by a density function and tracked by solving an advection equation. Solid body motion is modeled by the translation and angular motion. The mathematical formulation and numerical results are also described. To verify the efficiency, accuracy and capability of proposed algorithm, two dimensional incompressible cavity flow, the motion of a floating ball into water and a single rising bubble by buoyancy force are numerically simulated by the present scheme. As results, it is confirmed that the present scheme gives an efficient, stable and reasonable solution in the multiphase flow problem.

• Corrosion Science and Technology
• /
• v.10 no.2
• /
• pp.65-70
• /
• 2011

DLC is considered as the candidate material for application of moving parts in automotive components relatively in high pressure and temperature operating conditions for its high hardness with self lubrication and chemical inertness. The properties of interlayer between the substrate and the DLC film were studied. Arc ion plating method have been employed to deposit onto substrate and sputtering method was used for synthesizing DLC onto interlayer. Among these six types of interlayer, deposited DLC film onto TiCN showed excellent value for characteristics. From the results of analysis for physical properties of DLC films, it seems that the adhesion forces were more important factors than intrinsic mechanical properties such as hardness, roughness and wear resistance of DLC films. AFM(Atomic Force Microscope) was used for understanding roughness of DLC films. Hardnesses of the coating layers were identified by nano-indentation method and adhesions were checked by scratch method.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.587-596
• /
• 2014

Soil moisture is one of the most important interests in hydrological response and the interaction between the land surface and atmosphere. Estimation of Antecedent Wetness Conditions (AWC) which is soil moisture condition prior to a rainfall in the basin should be considered for rainfall-runoff prediction. In this study, Soil Wetness Index (SWI), Antecedent Precipitation Index ($API_5$), remotely sensed Soil Moisture ($SM_{rs}$), and 5 days ground Soil Moisture ($SM_{g5}$) were selected to estimate the AWC at four study area in the Korean Peninsula. The remotely sensed soil moisture data were taken from the AMSR-E soil moisture archive. The maximum potential retention ($S_{obs}$) was obtained from direct runoff and rainfall using Soil Conservation Service-Curve Number (SCS-CN) method by rainfall data of 2011 for each study area. Results showed the great correlations between the maximum potential retention and SWI with a mean correlation coefficient which is equal to -0.73. The results of time length representing the time scale of soil moisture showed a gap from region to region. It was due to the differences of soil types and the characteristics of study area. Since the remotely sensed soil moisture has been proved as reasonable hydrological variables to predict a wetness in the basin, it should be continuously monitored.