• Journal of Information Display
• /
• v.3 no.2
• /
• pp.1-5
• /
• 2002

A CMOS driving circuit for active matrix type polymer electroluminescent displays was designed to develop an on-chip microdisplay on the single crystal silicon wafer substrate. The driving circuit is a conventional structure that is composed of the row, column and pixel driving parts. 256 gray scales were implemented using pulse amplitude modulation method. The 2-transistor driving scheme was adopted for the pixel driving part. The layout was carried out considering the compatibility with the standard CMOS process. Judging from the layout of the driving circuit, it turns that it is possible to implement a high-resolution display about 400 ppi resolution. Through the HSPICE simulation, it was verified that this circuit is capable of driving a VGA signal mode display and implementing 256 gray levels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.787-794
• /
• 1999

This paper presents an ENMODL(enhances NORA MODL) circuit and implements a high-speed 32 bit CLA(carry lookahead adder) with the new dynamic logics. The proposed logic can reduce the area and the Propagation delay of carry because output inverters and a clocking PMOS of second stage can be omitted in two-stage MODL(multiple output domino logic) circuits. The 32-bit CLA is implemented with 0.8um double metal CMOS Process and the carry propagation delay of the adder is about 3.9 nS. The ENMODL circuits can improve the performance in the high-speed computing circuits depending on the degree of recurrence.

• Journal of Semiconductor Engineering
• /
• v.3 no.2
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.267-270
• /
• 2003

This paper proposes high performance $8{\times}8$ multiplier using current-mode quaternary logic technique. The multiplier is functionally partitioned into the following major sections: partial product generator block(binary-quaternary logic conversion), current-mode quaternary logic full-adder block, quaternary-binary logic conversion block. The proposed multiplier has 4.5ns of propagation delay and 6.1mW of power consumption. Also, this multiplier can easily adapted to binary system by the encoder, the decoder. This circuit is simulated under 0.35um standard CMOS technology, 5uA unit current, and 3.3V supply voltage using Hspice.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

A 10-b 500 MS/s A/D converter (ADC) with a hybrid calibration and error correction logic is described. The ADC employs a single-channel cascaded folding-interpolating architecture whose folding rate (FR) is 25 and interpolation rate (IR) is 8. To overcome the disadvantage of an offset error, we propose a hybrid self-calibration circuit at the open-loop amplifier. Further, a novel prevision digital error correction logic (DCL) for the folding ADC is also proposed. The ADC prototype using a 130 nm 1P6M CMOS has a DNL of ${\pm}0.8$ LSB and an INL of ${\pm}1.0$ LSB. The measured SNDR is 52.34-dB and SFDR is 62.04-dBc when the input frequency is 78.15 MHz at 500 MS/s conversion rate. The SNDR of the ADC is 7-dB higher than the same circuit without the proposed calibration. The effective chip area is $1.55mm^2$, and the power dissipates 300 mW including peripheral circuits, at a 1.2/1.5 V power supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.397-409
• /
• 1993

This paper proposed the design methodology of the 8 bit binary parallel adder with carry book-ahead scheme via current-mode CMOS multivalued logic and simulated the proposed adder under $5{\mu}m$ standard IC process technology. The threshold conditions of $G_K$ and $P_K$ which are needed for m-valued parallel adder with CLA are evaluated and adopted for quaternary logic. The design of quaternary CMOS logic circuits, encoder, decoder, mod-4 adder, $G_K$ and $P_K$ detecting circuit and current-voltage converter is proposed and is simulated to prove the operations. These circuits are necessary for binary arithmetic using multivalued logic. By comparing with the conventional binary adder and the CCD-MVL adder, We show that the proposed adder cab be designed one look-ahead carry generator with 1-level structure under standard CMOS technology and confirm the usefulness of the proposed adder.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.70-81
• /
• 2002

This paper describes a new basic element which shows a synaptic operation for neural logic applications and shows function feasibility. A key device for the logic operation is the insulated-gate pn-junction device on SOI substrates. The basic element allows an interface quite compatible to that of conventional CMOS circuits and vMOS circuits.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1005-1008
• /
• 2000

This paper presents a simple method to estimate short-circuit power dissipation and propagation delay for static CMOS logic circuits. Short-circuit current expression is derived by accurately interpolating peak points of actual current curves which is influenced by the gate-to-drain coupling capacitance. The macro model and its expressions estimating the delay of CMOS circuits, which is based on the current modeling expression, are also proposed after investigating the voltage waveforms at transistor output modes. It is shown through simulations that the proposed technique yields better accuracy than previous methods when signal transition time and/or load capacitance decreases, which is a characteristic of the present technological evolution.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.11-15
• /
• 2005

We propose a current mode logic circuit design method for LTPS TFT for enhancing circuit operating speed. Current mode inverter/buffers with passive resistive load had been designed and fabricated. Measurement results indicated that the smaller logic swing of the current mode allowed significantly faster operation than the static CMOS. In order to reduce the chip size, both all pTFT and all nTFT active load current mode inverter/buffer had been designed and analyzed by HSPICE simulation. Even though the active load current mode circuits were inferior to the passive load circuits, it was superior to static CMOS gates.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.152-162
• /
• 2003

In this paper, Binary to Quaternary Converter(BQC), Quaternary to Binary Converter(QBC) and Quaternary inverter circuit, which is the basic logic gate, have been proposed based on voltage mode. The BQC converts the two bit input binary signals to one digit quaternary output signal. The QBC converts the one digit quaternary input signal to two bit binary output signals. And two circuits consist of Down-literal circuit(DLC) and combinational logic block(CLC). In the implementation of quaternary inverter circuit, DLC is used for reference voltage generation and control signal, only switch part is implemented with conventional MOS transistors. The proposed circuits are simulated in 0.35 ${\mu}{\textrm}{m}$ N-well doubly-poly four-metal CMOS technology with a single +3V supply voltage. Simulation results of these circuit show 250MHz sampling rate, 0.6mW power consumption and maintain output voltage level in 0.1V.