• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.548-553
• /
• 2004

Patties were prepared using Barbari male goats meat (age about 4 yrs) and packed in HDPE under vacuum (VP) and aerobically (AP). Packed patties were stored at 4$\pm$1$^{\circ}C$ and evaluated for physico-chemical, microbiological and sensory changes on days 0, 5, 10, 15, 20 and 25. Overall mean water activity ($a_{w}$), moisture (%), fat (%), pH, TBA number and W-B shear force values (kg/$cm^{2}$) of patties were 0.983, 61.93, 18.39, 6.38, 0.150 and 0.86, respectively. Except pH that was significantly higher and TBA number significantly lower in VP patties, treatment had no significant (p>0.05) effect on other physico-chemical traits. However, storage period significantly (p<0.05) affected physico-chemical traits. Moisture (63.79%) and $a_{w}$ (0.985) were significantly (p<0.05) higher on day 25. Patties became firmer on day 20 onwards as indicated by higher W-B shear force. Though packaging method had no significant effect, storage period influenced microbial counts. The standard plate counts (SPC), which were initially log 5.98 CFU/g decreased significantly (p<0.05) on day 10 followed by steady increase and reaching log 4.89 on day 25. Almost similar trend was observed for psychrotrophic bacteria counts. Lactic acid bacteria counts declined as the storage period progressed. Coliforms, and yeast and mould counts were either not detected by the method used or were very low in numbers. All samples of AP patties revealed swollen, greasy and sticky surface with spongy texture on day 20 whereas only some of the VP patties shown such changes on day 20. Results indicated that vacuum packaging had definite advantage in preserving the sensory quality of patties than aerobic packaging but it did not help in extending the shelf-life beyond 15 days.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.144-152
• /
• 2013

In an effort to find the optimum porous of Taewoo through the mathematical model 2 - dimensional tank water experiment among the approached to a problem related to ocean engineering, this study analyzed the porosity by dividing it into 9 cases. As the wave penetrates through the longitudinal porous of the Taewoo model, it was found that there is a wave energy loss because of the phenomenon of the separation of the porous due to the eddy. Looking into the general tendency based on the wave-height meter (probe) data, it was found that the shorter wavelength and higher frequency area, the more reflection coefficients increased, but in contrast, the longer wavelength and lower frequency area, the transmission coefficients showed the increasing trend and energy dissipation was in a similar way with reflection coefficients. In addition, it was found that the bigger the porosity was, the narrower distribution range of reflection coefficients was, and the more its average value decreased. On the other hand the transmission coefficients in direct opposition to reflection was found to show the wider range and the more gradual increase in the average value as porosity was the bigger around the average value. In contrast, energy dissipation rate was found to increase linearly as porosity increased the more around the porosity of 0.2518 but it decreased gradually around the peak point. Through the above results, it is judged that the porous of optimum in the longitudinal direction of the Taewoo model perforated plate was about 2.6cm because it was found that the porosity which produced the lowest reflection and transmission coefficient and the highest energy dissipation. As a result of comparing this to the case where there was no porosity at all, it showed the function of wave absorbing about 31.60%.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.215-219
• /
• 2012

An attempt was made to evaluate creep reliability of two commercial Ni-based superalloys by using ultrasonic wave. The materials include fine-grained PM alloy fabricated by mechanical alloying and subsequent hot isostatic pressing, and IN738LC cast alloy with a grain size of a few cm. Microstructural parameters (fraction of creep cavity and size of ${\gamma}^{\prime}$ precipitates) and ultrasonic parameters (velocity, attenuation) were measured to try to find relationships between them. Ultrasonic velocity decreased with creep cavity formation in PM alloy. On the other hand, no distinct changing trend of ultrasonic velocity was observed for IN738LC alloy. Ultrasonic attenuation was found to have a linear correlation with the size of ${\gamma}^{\prime}$ precipitates and was suggested as a potential parameter for monitoring creep reliability of IN738LC alloy.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.5
• /
• pp.387-393
• /
• 2000

Recently, it appears to have a trend of adult having weight increase in Korea. The number of obese people is increasing in Korea due to the changes of meal pattern and the lack of physical activities. Currently, obesity is the prevalent health problem in the world. The purpose of this study was to investigate the effect of mulberry leaf-Jeolpyun on the serum lipids of overweighted male university students. After 3 days of education and adaptation on this study, twenty male university students with 20.9yrs old average were fed a uniformed dormitory foodservice, and they ate constant amount of 9% mulberry leaves added-rice cake, Jeolpyun(100g) instead of boiled rice(l00g) , on each meal. Experiment was conducted during 14 days period. All meals were provided promptly. and the subejects were required to have breakfast, lunch, and dinner on weekdays. Mean height, weight, and BMI were 176.55cm, 90.OOkg, and 28.73, respectively. Although it was not very significant, body weight of the subjects appeared to be reduced after consuming the 100g substitute diet of mulberry leaf-Jeolpyun. Daily energy Intake of the subjects was 2,360.6kcal, which represents 94% of the Korean RDA. The ratio of energy obtained from carbohydrate, protein, and fat was 55: 17'27 As compared with the Korean RDA, 65 : 15 20, carbohydrate consumption was decreased but protein and fat consumption was a little bit increased. The ratio of animal-protein source was 58%, and animal-fat intake was 42%. Triglyceride concentrations decreased. but HDL-cholesterol was in the reversed manner The concentrations of HDL-cholesterol increased significantly after the 2wk-lOOg subtitute diet of mulberry leaf-Jeolpyun (p<0.05) . However, there were no significant differences in total cholesterol and LDL-cholesterol con concentrations .

• Fashion & Textile Research Journal
• /
• v.1 no.1
• /
• pp.34-42
• /
• 1999

The purpose of this study was to change practical korean costume in 20C. In the early 20C, inflow of western civilization started to change korean costume. Since then gradually changes to be simple in Korean costume. Results of this study can be summarized as follows: Traditional jacket (jeo-go-li) gradually began to be long to waist line. This jacket length was to be long and it sleeve is to be short in early 2OC. Traditional skirt (Chi-rna) length was short to the calf of the leg. Traditional wide skirt was gradually to be narrow and pleats shape look as if it in go-gu-Ryeo Dynasty. The width of pleats was about 3~5 cm, be one-sided, look as if it western style in today. But pleats skirt already existed on a women's of the upper classes in go-gu-Ryeo Dynasty. Women's long Coat (do-lu-ma-gi) length was short to under hip line in late 20c. In this way, the practical idea, the factor of design was because of western idea in civilization ages, early 20C. Since then gradually reformed to be simple in Korean costume. Assuming that the trend of simplification in Korean costume is related to the idea of practical. Therefore Korean costume of living or a reformed Korean costume to be design of practical, functional, convenient, economically. And it must have to traditional idea, it is only beauty of shape, pattern, line, fabric in Korean costume.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.234-242
• /
• 2011

BACKGROUND: Cultivation of winter cover crops is strongly recommended to increase land utilization efficiency, animal feeding material self-production, and to improve soil and environmental quality. METHODS AND RESULTS: Four major winter crops (barley, Chinese milk vetch, hairy vetch, and rye) having different C/N ratio were seeded in silt loam paddy soil in the November 2007 and the aboveground biomass was harvested on the late May 2008 to evaluate its effectiveness as green manure, and root biomass distribution was characterized at the different depth (0-60 cm) to study its effect on physical properties and carbon sequestration in soil. During this experiment, the naturally growing weed in the rice paddy soil in Korea, short awn foxtail (Alopecurus aequalis Sobol), was considered as control treatment. Above-ground biomass of all cover crops selected was significantly higher than that of the control treatment (2.8 Mg/ha). Comparatively higher above-ground biomass productivity of rye and barley (15.8 and 13.5 Mg/ha, respectively) suggested that these cover crops possibly had the highest potential as a green manure and animal feeding material. Root biomass production of different cover crops followed the same trend as that for their above ground biomass. Rye (Secale cereal) might have the highest potential for soil C accumulation (7893 C kg/ha) by root biomass development, and then followed by barley (6985 C kg/ha), hairy vetch (6467 C kg/ha), Chinese milk vetch (6671 C kg/ha), and control (5791 C kg/ha). CONCLUSION(s): Cover crops like rye and barley having high biomass productivity might be the most effective winter cover crops to increase organic carbon distribution in different soil aggregates which might be beneficial to improve soil structure, aeration etc. and C sequestration.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.801-807
• /
• 2010

Purpose: Facial rejuvenating surgery has become a challenge to most plastic surgeons. Patients are demanding fewer complications, a prompt recovery, and more natural results. Current trend of the face lift surgery has been developed into less invasive procedures. Every aging patient in Asia wants to look younger without obvious evidence of surgical correction. Methods: The authors performed the limited dissection face lift with PDS quilting suture on twenty five patients. These five quilting sutures consist of sutures at 1~2 cm posterior to the prominent point of zygoma to the periosteum of the zygomatic arch, at the lateral border of Bichat's fat pad area to the zygomatic arch, at the lateral border of the orbicularis oculi muscle to the deep temporal fascia, at the upper lateral border of the platysma to the periosteum of the mastoid, and at the anterior lower margin of the earlobe to the deep temporal fascia by quilting suture technique to achieve rejuvenation. Results: These procedures could produce a balanced volumetric rejuvenation. This method gave considerable benefit of stable and satisfactory results. It provides reduced operative time, well corrected nasolabial fold and neck wrinkle, and swift recovery with minimal complications. Conclusion: Although it could not replace the classic facelift, this technique can be recommended as an option for patients who do not present with advanced facial aging or not want a more extensive procedure.

• Journal of Plant Biology
• /
• v.25 no.2
• /
• pp.83-99
• /
• 1982

In this study, thirty-two stands in Kwangnung forest located in the central part of Korea were preferentially selected. In each stand, all stems for trees and shrubs were recorded by species and their girths were measured down to 5cm. In addition, several enviromental factors such as field soil pH, field soil moisture, soil compressibility, depth of soil, thickness of litter layer, elevation and basal area were measured. Three soil cores were sampled and various physical and chemcial properties was determined. The vegetational data were subjected to three kinds of multivariate ordination(PO, PCA, RA). The results suggested that Kwangnung forest was consisted of three forest types: coniferous, mixed and broad leaved forest communities. The relation between the stand scores of ordination and several environmental factors were investigated in terms of correlation analysis in order to examine the relationships between the vegetation and certain environmental factors. As a result of this analysis, the amount of sand content in A1 horizon decreased frm the coniferous to broad leaved forest, while maximum field capacity, pore space, exchangeable cations, loss on ignition, soil pH nad the amount of total nitrogen had a tendancy to increase significantly. However, easily soluble phosphorus appeared to have little to do with the forest types. The result of species ordination of centered-standardized PCA suggested that the major successional pathway in Kwangnung forest was; Pinus densifloralongrightarrowQuercus mongolica, Q. serrata, Q. alienalongrightarrowCarpinus laxifloralongrightarrowC. erosa in sequence. This trend is in good agreement with the past studies. In three kinds of ordination (centered PCA, centered-standardized PCA and RA) based on nineteen species and twenty-five stands, the total variances accounted for the first three axes were 77%, 46% and 63% respectively. The estimated beta diversity in Kwangnung forest assumed as a coenocline, was 1.5~1.8 HC. Increasing the effect of the sampling errors on ordination perfermance, this low heterogeneity seems to cause the poor concentration of the total variance. The results from the four kinds of ordination were in good agreement with each other, especially between PO, centered-standardized PCA and RA appeared robust. It seems to be worthy of applying multivariate method for analyzing other forest communities in Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.281-291
• /
• 2021

To reduce the environmental load of the construction industry, there is a need to minimize construction and demolition by strengthening the eco-friendliness of building materials and extending the durable lifespan. Therefore, while many Hanok roof finishing methods have been proposed to address these problems, the current trend is to use the existing method due to issues such as economic feasibility, weight, and durability. The manufacturing method of clay roof tiles used as roofing materials for Hanok buildings is optimized by using a mixture of 64.5% Gyeongju clay, 15.0% kaolin, 15.0% FNS(Ferro Nickel Slag), and 5.5% MAS(Magnesia Aluminum Silicate) under optimal conditions. The results of the experiment involving firing at 1,125℃ showed that flexural strength of 12,102N, which is higher than the standard of KS F 3510, an absorption rate of 6.08%, a volume specific gravity of 2.15g/cm³, and the freeze-thaw properties were satisfied. A method for securing stable quality was studied.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.