• 대한방사선기술학회지:방사선기술과학
• /
• 제42권3호
• /
• pp.223-229
• /
• 2019

In order to reduce the radiation exposure dose of the patient and to obtain accurate diagnosis results, the quality control of the diagnostic radiation generator must be conducted periodically In particular, bone density test equipment could be influenced by many factors, and it is far more important because inaccurate measurement would eventually affect the result value. However, the cross-correction phantom of DXA equipment is poorly penetrated due to lack of awareness of the industry and the high cost. Therefore, this study developed a BMD phantom using a 3D printer and Korean BMD phantom with low cost by cross analyzing Korean BMD value from The Korean National Health and Nutrition Examination Survey and evaluated it. The L1, L2, and L3 BMD values of phantoms produced with the 3D printer were measured to be $0.887{\pm}0.006g/cm^2$, $0.927{\pm}0.006g/cm^2$, and $0.960{\pm}0.005g/cm^2$, at 215 mm height and $0.882{\pm}0.011g/cm^2$, $0.914{\pm}0.005g/cm^2$, $0.933{\pm}0.008g/cm^2$ at 155 mm height displaying statistically significant relevance. The result suggests that a proper quality control and cross calibration of DXA device be possible and expected to be an essential data for various medical phantom manufacture development using 3D printer.

• 한국건설관리학회논문집
• /
• 제22권2호
• /
• pp.97-105
• /
• 2021

발주제도 혁신을 통한 국내 건설산업의 글로벌 경쟁력 강화를 목적으로 시작된 시공책임형 CM 사업이 공공부문에서 시범사업의 형태로 시행되고 있다. 그러나 정식 발주제도로 나아가기 위한 관련 법령 제정까지는 시간이 필요해 보이며, 사업에 대한 성과분석도 아직까지 미진한 상황이다. 이에 본 논문에서는 현재 시행되고 있는 4개의 시범사업의 사업이전단계사업관리(Pre-Construction Service)에 대한 성과분석을 통해 사업의 효과와 신뢰성을 검증하고자 하였다. Team Building, 설계도서 정합성, 공기검토, VE, BIM 활용 등 총 5개의 분야에 대해 성과분석을 진행했으며, 참여자 면담조사를 통해 문제점을 확인하고 그에 대한 개선안을 제시하였다. 본 연구의 결과는 향후 이루어질 발주제도 법제화에 대한 기초자료로 활용될 수 있을 것으로 기대한다.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.52-60
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as Korean old corrugated containers(KOCC) and Korean old newsprint (KONP) with a vacuum forming method. The plate-like cushioning materials made of KOCC and KONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^3$) were a little higher than that of EPS (${\approx}0.03g/cm^3$) and much lower than that of pulp mold(${\approx}0.3g/cm^3$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of KOCC fibers containing more lignin than KONP show better shock-absorbing properties than KONP. Moreover, the cushioning materials made of KOCC and KONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to the increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a positive role in improving shock-absorbing ability.

• 수산해양기술연구
• /
• 제49권4호
• /
• pp.352-359
• /
• 2013

To estimate the mesh selectivity of gillnet for ocellate spot skate (Okamejei kenojei), the field tests were carried out 12 times with six different mesh sizes (121.2mm, 137.7mm, 151.5mm, 168.3mm, 178.2mm, 189.4mm) in the coastal waters of Taean, Chungcheongnamdo of Korea, 2010~2011. In the field tests, the total number of species was 31, and that of catch was 1,410 and the total weight was 618,006g. The number and weight of ocellate spot skate which is main target in this study were 1,004 and 434,592g, respectively. The catch in number of ocellate spot skate occupied about 71.2% in total catch. The others of catch species were marbled sole (8.4%), sea raven (4.4%), japanese swimming crab (4.2%) and flatfish (4.1%) and so on. The range of body disk width (DW) of ocellate spot skates which were caught in this study was 15.2~35cm and the mode was 27~29cm. The estimation equation of mesh selectivity using the extended Kitahara's method was expressed as s $(R)=s(DW/m)={\exp}\{(-0.56R^3-1.80R^2+12.96R-9.99)-4.26\}$. The optimum value of DW/m for 1.0 of retention probability in this estimation equation was estimated 1.899 and DW/m was estimated to be 1.194, 1.314, 1.395, 1.461 and 1.520 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. When applied to the retention probability of 0.5, the optimum mesh size was estimated to be 177.0mm on first maturity disk width 26.9cm of ocellate spot skate.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.637-643
• /
• 2015

The diet composition of juvenile Trachurus japonicus were studied using 195 specimens collected from 2013 (May, June, July, and September) to 2014 (May, June, and July) in the coastal waters of Geumodo, Yeosu, Korea. The size of juvenile T. japonicus ranged from 4.3 to 15.2 cm in body length (BL). Juvenile T. japonicus was carnivorous and crustaceans predators that consumes mainly consumed copepods. Its diet also included small quantities of decapods, cirripedians, nematods, chaetognathans, fishes, amphipods, cumaceans, ostracods and euphausiids. The graphical method for feeding strategy revealed that juvenile T. japonicus is an opportunistic and specialized predator on copepods, especially Corycaeus. affinis, and showed narrow niche width. Juvenile T. japonicus showed ontogenetic diet change. Small size group individuals (4.3-8.0 cm BL) mainly consumed copepods. The portion of this prey item decreased in the large size group (8.0-15.2 cm BL), and this decrease was paralleled with increased consumption of decapods.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.471-474
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as old corrugated containers (OCC) and old newspapers (ONP) with a vacuum forming method. The plate-like cushioning materials made of OCC and ONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^{3}$) were a little higher than that of EPS (${\approx}0.03g/cm^{3}$) and much lower than that of pulp mold (${\approx}0.3g/cm^{3}$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of OCC fibers containing more lignin than ONP show better shock-absorbing properties than ONP Moreover, the cushioning materials made of OCC and ONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to an increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a great role in improving shock-absorbing ability.

• 방사선산업학회지
• /
• 제8권3호
• /
• pp.141-146
• /
• 2014

Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a $^{63}Ni$ plating condition on the PN junction semiconductor needed for production of beta-voltaic battery. PN junction semiconductors with a Ni seed layer of 500 and $1000{\AA}$ were coated with Ni at current density from 10 to $50mA\;cm^{-2}$. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased. The results showed that the optimum surface shape was obtained at a current density of $10mA\;cm^{-2}$ in seed layer with thickness of $500{\AA}$, $20mA\;cm^{-2}$ of $1000{\AA}$. Also, pure Ni deposit was well coated on a PN junction semiconductor without any oxide forms. Using the line width of (111) in XRD peak, the average grain size of the Ni thick firm was measured. The results showed that the average grain size was increased as the thickness of seed layer was increased.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.617-623
• /
• 2021

The objective of this study is to simulate valve flow coefficient and flow characteristics such as velocity and pressure distribution for butterfly valve. The size of the valve used in this study is 125A. The range of the valve opening angle was α=15°~70°, and it was changed by 5°. At the range of α=15°~30°, the valve flow coefficient K_𝜐 gradually increased, and after α=30°, it increased rapidly. In the range of α=20°~70°, the pressure change in the -2.9cm~+2.9cm region in the pipe greatly depended on the opening angle and the position within the pipe. However, after +2.9cm, the pressure at the rear end of the valve was shown to depend only on the opening angle. At α=20°, Vortex shedding occurred for the first time at time t=0.25sec and continuously occurred in rear end of the valve over time. After α=45°, in the flow pattern at the rear end of the valve, the upward flow at the lower end of the valve and the flow at the upper end met each other to form a mixed flow. This flow phenomenon was shown to form a more intense mixed flow in the rear end region as the opening angle increased. Vortex flow occurred for the first time at α=15°, and the opening angle increased, the occurrence and disappearance of this flow phenomenon occurred periodically according to the certain flow region. The pattern of the pressure distribution in the region at the rear end of the valve showed a tendency to agree well with the results of the vorticity distribution.

• 농업과학연구
• /
• 제50권4호
• /
• pp.917-925
• /
• 2023

Efforts for developing the domestic horse industry in South Korea are evident through the various national policies. Proper management of stables for ensuring the health of horses is essential to sustain the growing equine industry. This study aimed to measure the fine dust emissions in stables based on the type and quantity of bedding used for horses, for establishing guidelines pertaining to bedding use in stables. The stables accommodated 12 horses. Sawdust, wood shavings, wood pellet, and straw were chosen as treatments. Three different quantities (approximately 3, 6, and 9 cm in height) were applied for each type. Fine dust measurements were carried out at three time points, with each measuring period lasting for approximately three weeks. Measurements included PM2.5 and PM10 fine dust levels. The initial analysis revealed that, sawdust with 9 cm bedding had the highest dust levels; approximately 54.6 ㎍/m³, for PM2.5 and 95.3 ㎍/m³, for PM10. Sawdust bedding at the highest quantity (9 cm) exhibited significantly higher initial fine dust emissions. These findings suggest that bedding materials with smaller particle size, such as sawdust and wood shavings, tend to produce finer dust. Initially, the fine dust emissions decreased in all bedding types and quantities, possibly due to the increased moisture content of bedding owing to horse manure production. However, emissions increased subsequently due to ammonia production.

• 대한원격탐사학회지
• /
• 제37권2호
• /
• pp.245-256
• /
• 2021

본 연구는 LiDAR 센서의 산림자원조사 적용성 검토를 위하여 제주 절물자연휴양림을 대상으로 삼나무의 개체목 탐지, 흉고직경과 수고를 측정하여 전통적인 산림자원조사와 정확성과 효율성을 비교·분석하였다. 백팩형 지상라이다(Backpack Personal Laser Scanning; BPLS)는 Greenvalley International 사(社)의 Model D50을 사용하였다. 최적의 데이터 수집을 위하여 표준지의 밀도와 작업 효율성을 고려한 LiDAR스캔의 표본추출방법을 7가지로 구분하였다. 분석은 개체목 변수 측정의 정확성을 파악하고 요소작업별 시간과 전체 분석시간을 조사하여 효율성을 평가하였다. 분석 결과, 백팩형 지상라이다를 이용한 입목 탐지율은 모든 패턴이 100%로 나타났다. 정확성은 패턴5(흉고직경: RMSE: 1.07 cm, Bias: -0.79 cm, 수고: RMSE: 0.95 m, Bias: -3.2 m)와 패턴7(흉고직경: RMSE: 1.18 cm, Bias: -0.82 cm, 수고: RMSE 1.13 m, Bias: -2.62 m)이 현장조사 방법으로 얻은 결과와 비교하였을 때 통계적 정확성이 높은 결과를 보였다. BPLS와 현장조사를 이용하여 1 ha의 데이터를 처리하는데 걸린 시간을 환산한 결과 BPLS는 약 115분~135분이 소요되며, 현장조사방법은 375분~1,115분으로 BPLS를 이용한 방법이 더 효율적인 것으로 나타났다. 따라서 하층식생이 적고 비교적 관리가 잘 된 인공 침엽수림에서는 BPLS 장비를 활용하여 효율적인 산림자원조사가 가능하며, 앞으로 다양한 임분 조건에서 적용 가능성을 분석할 필요가 있다고 판단된다.