• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.258-265
• /
• 1998

Application of the flat shell element with drilling D.O.F to linear buckling analysis of thin-walled structures is presented in this paper. The shell element has been developed basically by combining a membrane element with drilling D.O.F. and Mindlin plate bending element. Thus, the shell element possesses six degrees-of-freedom per node which, in addition to improvement of the element behavior, permits an easy connection to other six degrees-of-freedom per node elements(CLS, Choi and Lee, 1995). Accordingly, structures like folded plate and stiffened shell structure, for which it is hard to find the analytical solutions, can be analyzed using these developed flat shell elements. In this paper, linear buckling analysis of thin-walled structures like folded plate structures using the shell elements(CLS) with drilling D.O.F. to be formulated and then fulfilled. Subsequently, buckling modes and the critical loads can be output. Finally. finite element solutions for linear buckling analysis of folded plate structures are compared with available analytic solutions and other researcher's results.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.143-148
• /
• 1984

In this study we mainly dealt with the effects of organic retarder(calcium lignosulfate) on the early hydration process of clinker minerals. From a consideration of the hydration process of tricalcium silicate $(C_3S)$ tricalcium silicate $(C_3S)$-tricalcium aluminate $(C_3A)$ tricalcium silicate $(C_3S)$-tetracalcium aluminof-errite $(C_4AF)$ systems with calcium lignosulfate the following results were obtained. 1. when 0.25wt% of CLS was added to $C_3S$ the hydration process was progressed normally but adding of 0.5wt% its hydration was greatly retarded. 2. The hydration of $C_3S$-$C_3A$ system was progressed normally up to 0.5wt% but by adding gypsum its hydration was retarded slightly. 3. The hydration of $C_3S$-$C_4AF$ system was greatly retarded even with 0.25wt% of CLS but by adding gypsum its hydration process was recovered normally.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (A)
• /
• pp.67-69
• /
• 2003

자바는 서로 다른 종류의 컴퓨터 시스템에서 동일하게 동작하는 플랫폼 독립적인 특성을 가지고 있다. 자바가 상기계(JVM)는 클래스 파일을 읽어 들여 인터프리팅하여 실행한다. 보조기억장치가 없는 내장형 시스템에서는 메모리에 클래스 파일이 위치하는데 클래스 파일에는 디버깅등의 목적으로 사용하는 정보와 클래스, 상수, 필드, 메소드 둥의 정보들을 포함하고 있기 때문에 내장형 시스템에서 사용하기에 적합하지 않다. 본 논문에서는 클래스 파일을 변환하여 내장형 시스템에서 시스템의 효율적인 자원 사용과 성능을 향상시킬 수 있도록 클래스 파일을 변환 해주는 도구인 cls2bin을 설계 및 구현하였다. c1s2bin은 클래스 파일에서 동작에 필요하지 않은 정보들을 제거하고 인터프리팅 될 수 있는 새로운 이미지(bin) 파일을 생성한다 cls2bin의 동작과정과 bin 파일 포맷을 살펴봄으로서 내장형 시스템에서 효율적인 자원사용과 내부정보의 접근 방법을 고찰하였으며 그 결과로 내장형 자바 시스템에서의 개선된 클래스 파일의 형태를 정의하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권1호
• /
• pp.31-35
• /
• 2007

The main purpose of this study was to improve the efficiency and quality of in vitro embryo production in Korean Native Cows (KNC). We examined the effects of ovarian morphologies (Experiment 1) and the culture vessel (Experiment 2) on in vitro maturation (IVM). We measured the subsequent development rates and cell numbers of blastocysts. In Experiment 1, the ovaries of KNC were divided into six groups, based on follicle and corpus luteum (CL) morphology. The development rates to the 2- and 8-cell stages were similar among the six groups. The development rates to blastocyst stages were significantly higher in the group without a CL or follicle (WOCL/F) than in the groups with follicular cysts (FCs), regressive CLs (RCLs) or cystic CLs (CCLs) (p<0.05). The cell number of the inner cell mass (ICM) of blastocysts in the FCs and RCLs groups, and the number of cells in the trophectoderm (TE) in the WOCL/F group, FCs, growing CLs (GCLs) and RCLs were significantly higher than in other groups (p<0.05). The total cell number (TCN) in the WOCL/F, FC and RCL groups was also significantly higher than in other groups (p<0.05). The ICM cell number/TCN ratio was significantly higher in the FC and RCL groups than in the GCL and DF groups (p<0.05). In Experiment 2, oocyte IVM was carried out in culture dishes, in 0.25- or 0.5-ml straws used for freezing sperm. The development rate to the 2-cell stage was significantly higher in the 0.5-ml straw group than in the 0.25-ml straw group. The development rates to the blastocyst stage were similar in the dish and the two straw groups. There were no differences in the cell numbers of ICM, TE or TCN or ICM cell number/TCN ratios between groups.

• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1035-1042
• /
• 2016

상용 비행시뮬레이션 게임 엔진 X-Plane을 이용하여 구성한 비행시뮬레이터에 대해 FTD level 5를 만족시킬 수 있는 QTG작성에 대해 연구하였다. 모델은 Cirrus사(社)의 SR-20을 대상으로 하였다. QTG의 테스트항목 중에는 조종반력을 측정하는 항목도 있다. 따라서 Brunner사(社)의 CLS(Control Loading System)을 조종 장치에 설치하여 조종반력을 측정할 수 있도록 구성하였다. X-Plane은 자체적으로 트림루틴을 제공하지 않으므로 외부에서 Autopilot을 구성하여 항공기가 트림상태에 도달할 수 있도록 하였다. 또한 테스트를 자동으로 수행할 수 있는 알고리듬을 개발하여 수동으로 조종하여 테스트하는 번거로움을 피하고 같은 테스트를 같은 조건으로 진행할 수 있도록 하였다. FTD Level 5의 경우 실제 비행데이터가 아닌 alternative data source를 적용할 수 있으며 이를 활용하여 모든 테스트 결과가 주어진 범위를 만족하였다.

• 한국수정란이식학회지
• /
• 제26권1호
• /
• pp.85-89
• /
• 2011

Somatic cell nuclear transfer (SCNT) is a useful tool for reproducing genetically identical animals or producing transgenic animals. Many reports have demonstrated that the efficiency of animal cloning by SCNT requires reprogramming of the somatic nucleus to a totipotent like-state. The SCNT-related reprogramming might mimic the natural reprogramming process that occurs during normal mammalian development. However, recent evidence indicates that the reprogramming event by SCNT is incomplete. In this study, the traditional SCNT procedure (TNT) was modified by injecting donor nuclei into recipient cytoplasm prior to the enucleation process to expose the donor nucleus before removing the karyoplast containing the chromosomes of the oocytes which might possess additional reprogramming factors, and this modified technique was named as reversing the usual order of SCNT (RONT). Other procedures including activation and in vitro culture were the same as TNT. Contrary to expectations, the rate of blastocyst development was not different significantly between RONT and TNT (8.6% and 7.9%, respectively). However, duration of micromanipulation performed by the same technician and equipments was remarkably reduced because the ruptured oocytes after nuclear injection were excluded from the enucleation process. This study suggests that RONT, a simplified SCNT protocol, shortens the duration of SCNT procedure and this less time-costing protocol may enable the researchers to perform murine SCNT easier.

• 한국항공우주학회지
• /
• 제32권4호
• /
• pp.95-100
• /
• 2004

본 논문에서는 기계적 링키지의 가역 (Reversible) 비행조종장치를 갖는 항공기익 조종간 조종력 재현 시스템 (CLS : Control Loading System) 개발을 목적으로 조종력 재현 장치 제어기 설계, 시스템 구성, 조종력 재현 장치 운용 환경을 구축하고 시험평가를 수행한 내용을 기술한다. 시스템 구성은 기계적인 외형부분과 힘을 측정하는 센서부분과 스틱에서의 반력을 재현하는 모터부분과 안전장치로 되어 있다. 하드웨어와 PC간의 입출력 신호 연결 및 제이기로 dSpace 사의 DS1103 DSP장치를 사용하였다. 대상항공기 (KT-1)의 비행 조종장치 모델링을 바탕으로 피치축과 롤축에 대한 CLS를 구성하고, 조종력 재현장치 제어법칙 설계와 모니터링 S/W 및 실시간 시험평가도구를 포함한 시험평가 및 운용환경 대해 기술하였다. 정적 및 동적시험을 수행하여 실제 대상항공기 데이터와 비교함으로써 개발한 시스템을 검증하였다.

• 임상간호연구
• /
• 제21권3호
• /
• pp.277-292
• /
• 2015

Purpose: The purpose of this study was to develop a Clinical Ladder System (CLS) model for staff nurses working in inpatient units of tertiary care hospitals in Korea. Methods: The study was carried out in 2 steps. First, a nursing competence evaluation scale was developed. Second, evaluation of the nursing competences, qualifications, and professional activities of 230 nurses from five tertiary care hospitals was done by 49 head nurses between Feb. and Dec., 2014. Nurses were selected by head nurses according to their clinical experience and expected behavioral characteristics at each level of the ladder. Results: A nursing competence scale was developed consisting of 5 subcategories (clinical practice, ethical practice, education, leadership, and professional development) and 11 elements, and 5 levels of behavioral indicators for each element. Cronbach's alphas for the entire tool and subcategories were over .853 and stability of the scale was confirmed. There were significant differences in nursing competence according to the 5 levels of the ladder. Conclusion: The findings indicate that the proposed CLS model with a standard score for nursing competence, recommended or obligatory criteria for qualifications and professional activities provides a good tool for developing nurses' competences and retaining excellent nurses in clinical practice.

• 한국수정란이식학회지
• /
• 제27권3호
• /
• pp.189-192
• /
• 2012

Although embryonic stem cells (ESCs) or ES-like cells are reported from many mammalian species other than the mouse, the culture system for murine ESCs may not be suitable to the other species. Previously many other research groups have modified either human or mouse ESC culture systems for bovine ESC culture. In this study, we compared three different culture mediums consisting of DMEM, ${\alpha}$-MEM or KnockOut$^{TM}$-DMEM (KO), which are modified from human or mouse ESC culture system, for the generation of bovine ESCs. In this study, some pre-requisite events which are important for establishment and long-term propagation of ESCs such as inner cell mass (ICM) attachment on feeder cells, primary colony formation and sustainability after passaging. Once the ICM clumps attached on feeder cells, this was designated as passage 0. In regards to the rate of ICM attachment, ${\alpha}$-MEM was superior to the other systems. For primary colony formation, there was no difference between DMEM and ${\alpha}$-MEM whereas KO showed lower formation rate than the other groups. For passaging, the colonies were split into 2~4 pieces and passed every 5~6 days. From passage 1 to passage 3, DMEM system seemed to be appropriate for maintaining putative bovine ESCs. On the other hand, ${\alpha}$-MEM tended to be more suitable after passage 6. Although ${\alpha}$-MEM support to maintain a ES-like cell progenies to passage 15, all three culture systems which are modified from human or mouse ESC culture media failed to retain the propagation and long-term culture of putative bovine ESCs. Our findings imply that more optimized alternative culture system is required for establishing bovine ESC lines.

• 한국측량학회지
• /
• 제24권2호
• /
• pp.159-165
• /
• 2006

본 논문에서는 위성고도계자료를 이용하여 개발된 평균해면모델인 CLS_SHOM과 지구중력장 모델인 EGM96으로부터 평균해면고와 지오이드고를 계산하여 해면지형을 계산하고, 이를 이용하여 지형류의 흐름을 추정하였다 지형류의 추정을 통하여 해양의 물리학적인 특성을 연구할 수 있기 때문에 외국에서는 많은 연구가 수행되어 왔으나 우리나라의 경우에는 연구가 이루어지지 않은 상태이다. 본 연구에서는 지형류에 대한 기초연구로서 동해에서의 지형류 흐름특성을 분석하여 제시하였다. 연구결과 동해지역에 대한 해면지형의 평균은 약 37cm로 계산되었고, 지형류 속도는 평균 -0.028m/sec로 계산되었다. 지형류의 흐름은 태평양 해수가 대한해협을 통과하면서 속도가 증가한 후에 일본열도의 외측단을 따라서 동북동 방향으로 거의 일정한 속도로 흐르다가 좁은 Tsugaru 해협과 Soya 해협을 통하여 유출되며, 한반도의 동해안을 따라서 북쪽으로 흐르다가 Soya해협과 북동북으로 향하여 Okhotsk해로 유출되는 것으로 나타났다.