• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.701-706
• /
• 2006

In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas. We examined the effects of the post annealing temperature on the structural variation of the DLC films. The films were annealed at temperatures ranging from 300 to $900^{\circ}C$ in steps of $200^{\circ}C$ using RTA equipment in nitrogen ambient. The thickness of the film and interface between film and substrate were observed by surface profiler, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), respectively. Raman and X-ray photoelectron spectroscopy (XPS) analysis showed that DLC films were graphitized ($I_D/I_G$, G-peak position and $sp^2/sp^3$ increased) ratio at higher annealing temperature. The variation of surface as a function of annealing treatment was verified by a AFM and contact angle method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.401-407
• /
• 1991

Anticarcinogenic conjugated dienoic derivatives of linoleic acid (CLA) is present in grilled beef, cheese, and related foods, CLA is generated via isomerization of linoleic acid in the cow's rumen by anaerobic bacteria and food proceessing as well. Another source of CLA is its endogenous generation via the carbon centered free radical oxdation of linoleic acid. We propose that the formation and generation of CLA in vivo represents a previously unrecognized in situ "defense mechanism" against membrane attack by oxygen free radicals. The cis, 9-trans, 11 CLS isomer is selectively incorporated into cellular phospholipid, which exhibits a potent antioxidant, reduces the activation of 2-amino-3-methylimidazo, [4,5-f] quinoline (IQ) for baxterial mutagenesis, and inhibits ornithine decarboxylase(ODC) activity induced by 12-0-tetradecanoylphorbol-13-acetate (TPA). We believe that at least these biological activities of CLA explain the anticarcinogenic activity of CLA.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.2
• /
• pp.52-56
• /
• 2008

Carbon nanotube films were fabricated by the catalytic CVD method. Plasma processed time effects on the field emission property were studied. The atomic structure was observed by using X-ray photoelectron spectroscopy (XPS). The surface composition changes were observed on the plasma processed CNT films. The O1s/C1s signal ratio and the Fls/Cls signal ratio changed from 1.1 % to 24.65 % and from 0 % to 3.1 % with plasma process time, respectively. We could guess it from these results that the Ar plasma process could change the surface composition effectively. In the case of the original-CNT film, no carbon shift was observed. In the case of the Ar plasma processed CNT films, however the oxygen related carbon shifts were observed. This oxygen related carbon shift at higher binding energy implies the increment of amount of the oxygen. It's possible that the increment of these bonds between carbon and oxygen results in the improvement of field emission performance.

• Structural Engineering and Mechanics
• /
• v.15 no.4
• /
• pp.415-436
• /
• 2003

The combination of spatial latticed structures (hereafter SLS) and flexible cables, the cable-stayed spatial latticed structures (hereafter CSLS) can cross longer span. According to variation principle, a novel geometric nonlinear formulation for 3-D bar elements considering large displacement and infinitesimal rotation increments with second-order precision is developed. The cable nonlinearity is investigated and it is taken that the secant modulus method can be considered as an exact method for a cable member. The tower column with which the cables link is regarded as a special kind of beam element, and, a new simplified stiffness formulation is presented. The computational strategies for the nonlinear dynamic response of structures are given, and the ultimate load carrying capacities and seismic responses are analyzed numerically. It is noted that, compared with corresponding spatial latticed shells, the cable-stayed spatial latticed shells have more strength and more stiffness, and that the verical seismic responses of both CSLS and CLS are remarkably greater than the horizontal ones. In addition, the computation shows that the stiffness of tower column influences the performance of CSLS to a certain extent and the improvement of structural strength and stiffness of CSLS is relevant not only to cables but also to tower columns.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.640-646
• /
• 2003

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as potential application to fabricate the surface nanostructures because of its operational versatility and simplicity. The objective of the work is to suggest new mastless pattern fabrication technique using the combination of machining by nanoindenter and KOH wet etching. The scratch option of the nanoindenter is a very promising method for obtaining nanometer scale features on a large size specimen because it has a very wide working area and load range. Sample line patterns were machined on a silicon surface, which has a native oxide on it, by constant load scratch (CLS) of the Nanoindenter with a Berkovich diamond tip, and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structure was made because of masking effect of the affected layer generated by nano-scratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved patterns can be used as a mold that will be used for mass production processes such as nanoimprint or PDMS molding process. All morphological data of scratch traces were scanned using atomic force microscope (AFM).

• Annual Conference on Human and Language Technology
• /
• 2022.10a
• /
• pp.47-52
• /
• 2022

환자와 주변인들에게 다양한 문제를 야기하는 치매와 조현병 진단을 위한 모델을 제안한다. 치매와 조현병 진단을 위해 프로토콜에 따라 녹음한 의사와 내담자 음성 시료를 전사 작업하여 분류 태스크를 수행하였다. 사전 학습한 언어 모델의 MLM Head를 이용해 분류 태스크를 수행하는 Prompt 기반의 분류 모델을 제안하였다. 또한 많은 수의 데이터 수를 확보하기 어려운 의료 분야에 효율적인 Few-Shot 학습 방식을 이용하였다. CLS 토큰을 미세조정하는 일반적 학습 방식의 Baseline과 비교해 Full-Shot 실험에서 7개 태스크 중 1개 태스크에서 macro, micro-F1 점수 모두 향상되었고, 3개 태스크에서 하나의 F1 점수만 향샹된 것을 확인 하였다. 반면, Few-Shot 실험에서는 7개 태스크 중 2개 태스크에서 macro, micro-F1 점수가 모두 향상되었고, 2개 태스크에서 하나의 F1 점수만 향상되었다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.3
• /
• pp.80-87
• /
• 1997

As a result of experimenting the temperature characteristics of origination voltage in Al/$AL_1,O_3/PI (nL)/Au, the sample of polyimide LB film and AI/$AL_1,O_3/Cls TCNQ(lOL)/Al, the difference of work function is found between upper and lower electrodes. If polyimide LB film is accumulated with Z type or becomes imide, the polarization of the film is not made. And AI/$AL_2,O_3/C-{15}TCNQ( IOL)/ AI which is the CI5 TCNQ LB film sample doesn't show the difference of work function because it has the same upper and lower electrode and the polarization is found on the film. As a result of experiment with MIM element of LB ultra thin film, Direct current more than hun¬dreds of m V is generated and it can be used for industrial power resources in the area of electricity, electronics and information communication.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.33-36
• /
• 2011

The objective of this work was to determine the effect of corpus luteum (CL) grade on pregnancy rate after embryo transfer in Korean cattle and we found that CL development was linked to pregnancy rate. The in vivo derived blastocyst-stage embryos were transferred to 15 recipients synchronized in the estrus cycles. Based on size and palpable characteristics, CLs were categorized into three grade. The grade three CL is not to be identified by rectal palpation. The pregnancy rates tended to increase with the increase in CL size of recipients. In grade one, two, and three, the pregnancy rates were 62.5%, 50.0%, and 0%, respectively. This result suggests that pregnancy rates after embryo transfer might be affected by the CL status of recipients.

• The Plant Pathology Journal
• /
• v.24 no.2
• /
• pp.143-151
• /
• 2008

To define the functions of the rpf genes in Xanthomonas oryzae pv. oryzae (Xoo), which regulates pathogenicity factors in Xanthomonas campestris pv. campestris (Xcc), marker-exchange mutants of each rpf gene were generated. When the mutants were inoculated on a susceptible cultivar, the lesion lengths caused by the rpfB, rpfC, rpfF, and rpfG mutants were significantly smaller than those caused by the wild type, whereas those caused by the rpfA, rpfD, and rpfI mutants were not. Several virulence determinants, including extracellular polysaccharide (EPS) production, xylanase production, and motility, were significantly decreased in the four mutants. However, the cellulase activity in the mutants was unchanged. Complementation of the rpfB and rpfC mutations restored the virulence and the expression of the virulence determinants. Expression analysis of 14 virulence genes revealed that the expression of genes related to EPS production (gumG and gumM), LPS (xanA, xanB, wxoD, and wxoC), phytase (phyA), xylanase (xynB), lipase (lipA), and motility (pitA) were reduced significantly in the mutants rpfB, rpfC, rpfF, and rpfG. In contrast, the expression of genes related to cellulase (eglxob, clsA), cellobiosidase (cbsA), and iron metabolism (fur) was unchanged. The results of this study clearly show that rpfB, rpfC, rpfF, and rpfG are important for the virulence of Xoo KACC10859, and that virulence genes are regulated differently by the Rpfs.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.395-402
• /
• 2016

Space frame structures considering the components such as forms, layers, grids, etc. are possible to form a large space without interior columns. Here, steels having the yield strengths of 210 MPa to 450 MPa are generally used. The high strength steel (i.e., yield strength of 690 MPa) having suitable weldability, aseismicity and economics have been recently developed. In this paper, the high strength steel is applied to the space frame structures in order to analytically find out their transient responses considering the material and geometric nonlinearities. For various circular dome types of space frame structures, the modal analysis and nonlinear transient analysis are carried out using nonlinear three dimensional finite element analysis.