• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.131-137
• /
• 2004

Conventional traffic signal optimization models assume that green intervals for pedestrian crossings are given as exogenous inputs such as minimum green intervals for straight-ahead movements. As the result, in reality, the green intervals of traffic movements may not distribute adequately by the volume/saturation-flow of them. In this paper, we proposed signal optimization models formulated in BMILP to integrate pedestrian crossings into traffic movements under under-saturated traffic flow. The model simultaneously optimizes traffic and pedestrian movements to minimize weighted queues of primary queues during red interval and secondary queues during queue clearance time. A set of linear objective function and constraints set up to ensure the conditions with respect to pedestrian and traffic maneuvers. Numerical examples are given by pedestrian green intervals and the number of pedestrian crossings located at an arm. Optimization results illustrated that pedestrian green intervals using proposed models are greater than those using TRANSYT-7F, but opposite in the ratios of pedestrian green intervals to the cycle lengths. The simulation results show that proposed models are superior to TRANSYT-7F in reducing delay, where the longer the pedestrian green interval the greater the effect.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.541-550
• /
• 2011

The purpose of this study was to investigate the kinematic characteristics of the $5^{th}$ and $6^{th}$ hurdle clearances during the final of the 100-m hurdles event at the IAAF World Championships, Daegu 2011. To this end, the hurdling motions of the top 4 ranked female hurdlers in the competition were analyzed. A total of 12 cameras were used to record their motions, with a sampling frequency of 120 Hz. The cameras were calibrated using $11{\times}2{\times}1\;m$ control objects that covered all of the lanes ($1^{st}{\sim}8^{th}$ lanes). After analyzing all the data, we arrived at the following results. For the take-off phase, a negative relationship between the take-off time (CT) and athlete's rank was found. In addition, the average distances from the hurdle to take-off (L1) were shown to be 2.23 m and 2.17 m for the $5^{th}$ and $6^{th}$ hurdles, respectively. For the distance from the hurdle to landing (L2), Pearson ($1^{st}$ rank) and Carruthers($2^{nd}$ rank) showed inconsistent patterns whereas Harper ($3^{rd}$ rank) and Porter ($4^{th}$ rank) showed consistent patterns. All althetes revealed similar 3 steps patterns between hurdles, which consisted of a shorter $1^{st}$ step, longer $2^{nd}$ step and shorter $3^{rd}$ step.

• The Journal of the Korean Society for Microbiology
• /
• v.35 no.3
• /
• pp.251-261
• /
• 2000

V. vulnificus is an estuarine bacterium which causes septicemia and shock in susceptible patients. The organism produces a hemolytic cytolysin (VvH), which has a membrane damaging effect on erythrocytes. To clarify the mechanisms by which VvH might contribute to virulence, we examined its effect on macrophages. When mouse peritoneal macrophages were harvested and co-cultured with hemolysin-positive V. vulnificus strains (100 bacteria/cell), about 60% of the macrophages were killed; macrophages were not killed when co-cultured V. vulnificus strain CVD 707, a VvH-negative deletion mutant. Exposure of macrophages to filtered culture supernatants (2.5 HU/ml) and purified VvH (3 HU/ml) resulted in an increase in dead cells (80 and 90%, respectively), as determined by the trypan blue dye exclusion method and LDH release from macrophages was also increased (70 and 65.5%, respectively). The cytotoxic effect of VvH on macrophages was both the dose- and time-dependent. The VvH caused damage to the macrophage membrane and was blocked significantly by preincubation with cholesterol (p<0.01). Fetal bovine serum showed remarkable inhibition of VvH synthesis by V. vulnificus and inhibited VvH activity in culture supernatant. Cell viability was increased by 35% (p<0.01) and LDH release decreased by 28% (p<0.01) when macrophages were incubated with V. vulnificus (100 bacterial cell) in DMEM-10% FBS for 2 hr. Bacterial clearance activity of mice against V. vulnificus CVD 707 was decreased by pretreatment with 10 HU of VvH. This result suggests that the VvH can impair the membrane of macrophages and may playa role in the pathogenesis of V. vulnificus septicemia.

• Journal of architectural history
• /
• v.21 no.1
• /
• pp.7-26
• /
• 2012

Nakseonjae in Changdeokgung Palace was established at The King Hunjong's 13rd year (1847), the mid-19th century. It was constructed for own rests of King Hunjong and the residence of Kyungbin (king's concubines), and is showing features of upper-class houses from several points such as rustic architectural types by getting out of authoritative aspects as king's shelter space within the palace, block and floor distribution that separated spaces for men and women, simplicity in structures and styles, and non-colorful painting etc. This study aims at tracing on which architectural types did the upper-class houses within Hanyang (modern Seoul) at late Joseon Dynasty have and what was characteristics of Nakseonjae. The resemblance between Nakseonjae and the upper-class houses was very little differences from scale aspects, and floor plan shapes of Anchae (women's quarters) and Sarangchae (men's quarters) were followed basic common styles. Also, resemblance could be confirmed in the structural styles too. Characteristics of Nakseonjae are showing apparent differences from clearance compositions such as hall configuration etc. Nakseonjae was king's dwelling place, and spaces for house's collateral functions such as kitchen, stable, and warehouse etc together with shrine were unnecessary, and such places were substituted into servants' quarters for assisting the Royal family. In detailed structural styles, column's size was larger 3cm or more than the upper-class houses, and its height was higher to the degree of 30~60cm. Besides, formality as king's shelter space was raised more in decorating aspects, and Nakseonjae was implemented by getting architectural influences from Qing Dynasty of China. This study induced features of Hanyang's upper-class houses at the 19th century by supplementing distribution and space configurations at existing cases of Seoul and Gyeonggi area together with house diagrams having been collected by Gaokdohyung (site and floor plan) of Jangseogak Library, and confirmed resemblances and differences with Nakseonjae, that is, features of Nakseonjae. Through the result, this study judges a fact that architecture of Nakseonjae seemed to be affected from conveniences of upper-class houses within Hanseong, and also architectural styles and distribution types of Nakseonje would give influences to the upper-class houses.

• Journal of agricultural medicine and community health
• /
• v.16 no.1
• /
• pp.27-32
• /
• 1991

We measured volume of daily urinary excretion. daily excretion of $Na^+$ and $K^+$, creatinine clearance, blood $Na^+$ and $K^+$ concentration on 34 subjects(12 men. 21 wenen) who live in Hanlim sub-county. Kimhae county. Kyongnam, Korea in December 1990. The data were compared to the data in 9 urban residents(4 men, 5 wemen). Results were as follows. I) Daily mean urinary $Na^+$ excretion of rural residents was $255{\pm}95.6$mEq/day. It is much lower than that of in 1960 but higher than that of students living in urban area(1975) or that of occidentals. 2) Daily mean urinary $K^+$ excretion of rural residents was $45{\pm}15.1$mEq/day. 3) $K^+$ excretion of rural residents was similar to that of urban residents but because of the relatively high $Na^+$ excretion, $K^+/Na^+$ ratio was significantly lower than that of urban residents. In conclusion. salt intake and excretion of rural residents tends to have been decreased progressively and it is thought to be the result of the improvement in dietary life especially increased intake of animal protein.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.132-139
• /
• 2016

The progressive attrition of teeth is a normal process by aging. However, excessive tooth wear with decreased vertical dimension of occlusion and collapse of occlusal plane may cause pathologic pulpal condition, occlusal disharmony, functional disorders and esthetic problems. The change of vertical dimension is required in case that there is no sufficient clearance for restoration or in case that the occlusal relationship is modified. For gaining the vertical dimension, a careful diagnosis is essential prior to starting the restoration treatment. After evaluating adaptation of neuromuscular system of patient during provisional phase, the final restorations can be fabricated. In this case, a 78 year old male with severely worn down dentition was treated. To improve the esthetic appearance and to achieve the ideal occlusal relationship, the full mouth rehabilitation with minimal increase of vertical dimension is planned and diagnostic wax-up was performed at the increased vertical dimension. After evaluation of provisional restorations for 12 weeks, final restorations were fabricated and routine clinical assessments were made. After 1 year, the restorations with newly established occlusal scheme are well maintained without significant complications and esthetically and functionally satisfactory results were obtained.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.153-166
• /
• 2015

Long subsea tunnel to be built below the seabed, as compared to the general railway tunnel, is subject to many restrictions in terms of spatial limitation when vertical or inclined shafts are built for the purpose of ventilation and fire safety. So, the construction of some artificial island is required to provide ventilation. But, because of construction difficulty and cost increase, it is necessary to minimize the artificial island construction. The longer ventilation distance is, the more fresh air requirement is needed. When supply airflow becomes excessive, duct size is restricted by the limitations of structure clearance and fan pressure and power increase exponentially. Therefore, in order to build a long subsea tunnel, it is necessary to overcome these practical problems and to develop technical solution that can keep the comfortable condition of tunnel environment during construction. In this study, as on ventilation method development suitable for long subsea tunnel, through comparison of temporary ventilation capacity calculation methods during construction phase, domestic and abroad, the application of Swiss SIA 196 code is found suitable for long subsea tunnel. And, through experiment on leakage of the duct connector, we confirmed that the leakage ratio per 100 m of domestic duct connection type is between 1.5~3.0%. Based on S-class duct of SIA 196 code, ventilation distance is 10.2 km, So, ventilation distance can be longer if duct connection method is improved. So, we confirmed that the improvement of leakage ratio is key issue in the construction-phase ventilation of long subsea tunnel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.126-136
• /
• 2018

A steel-plate concrete composite beam is composed of a steel plate, concrete and shear connector to combine inhomogeneous two materials. The steel plate is assembled by welding an existing composite beam. In this study, new steel-plate concrete composite beam, called a SPC Beam, was developed to reduce the shear connector and improve the workability. The SPC Beam was composed of folding steel plates and concrete, without a shear connector. The folding steel plate was assembled using high strength bolt instead of welding. To improve the workability in field construction, a hat-shaped Cap was attached to the junction with a slab. Monotonic load testing under two points was conducted under displacement control mode. The flexural strength of the specimen for positive moment and negative moment was calculated using the plastic stress distribution method. The test results showed that the flexural strength of the new SPC Beam had 80% of the strength of a complete composite beam. In addition, increasing the composite ratio was possible through clearance controls of the cap. In this study, the performance of the SPC Beam was verified through additional experiments and analyses with the cross-sectional shape and cap as variables, because the representative shape in the positive negative moment region is targeted.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.347-355
• /
• 2006

A study was conducted to predict the rumen microbial protein production based on urinary excretion of purine derivatives in buffaloes fed a diet of wheat straw and concentrate (40:60) at four fixed levels of feed intake. (95, 80, 60 and 40% of preliminary voluntary feed intake) following experimental protocol of IAEA (Phase I). The buffaloes were allocated according to a $4{\times}4$ latin square design. The urinary allantoin, uric acid, total PD excretion (mmol/d) in treatments L-95, L-80, L-60 and L-40 was 20.13, 16.00, 12.96 and 9.17; 1.88, 2.12, 2.11 and 2.15; 22.01, 18.12, 15.07 and 11.32, respectively and were significantly (p<0.05) different among treatments except for uric acid. The rate of PD excretion (mmol/d) was positively correlated with the digestible organic matter intake. Variations were observed in PD and creatinine concentration in spot samples collected at 6-hour interval. However, daily PD:Creatinine ratio (PDC index) appears to be a reasonably good predictor of microbial-N supply. The contribution of basal purine excretion to total excretion of purine derivatives (PD) was determined in pre-fasting period followed by a fasting period of 6 d (Phase II). Daily PD and creatinine excretion (mmol/kg $W^{0.75}$) during fasting averaged 0.117 and 0.456 respectively for buffaloes. The excretion rates of PD decreased significantly (p<0.01) during fasting compare to pre-fasting period, the urinary creatinine excretion remained almost similar. Except for creatinine, plasma concentration of target parameters significantly (p<0.01) declined during fasting. Likewise, glomerular filtration rate (GFR) and renal clearance of allantoin and uric acid also decreased. Based on the PD excretion rates during fasting and at different levels of feed intake obtained in this study, a relationship between daily urinary PD excretion (Y-mmol) and microbial purine absorption (X-mmol) was developed for buffaloes as Y = 0.74X+0.117 kg $W^{0.75}$. The microbial N supply (g/kg DOMI) remained statistically similar irrespective of dietary treatment. The results showed that excretion of urinary purine derivatives is positively correlated with the levels of feed intake in Murrah buffaloes and thus, estimation of urinary purine derivatives and PDC index could be used to determine microbial nitrogen supply when there is large variation in level of feed intake.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.9-15
• /
• 2005

To design ship channel is one of important factors for planning and developing a port. In most case, the core factors for designing ship channel are the layout and width of channel provided the net underkeel clearance is secured to be safe enough to pass. In this study, Variable Bumper Area(VBA) model is applied to design and assess ship channel. This model reflects ship's particular, ship domain theory, ship speed and mariner's ship handling skill and experience, especially external forces which cause leeway, set and drift and the change of ship maneuvering characteristics. A real time, full mission shiphandling simulator is used to analyze ship dynamic data according to mariner's ship control, external forces, ete. This model defines Domain degree and Domain-index for assessing the efficiency and safety of the channel. The proposed model is applied to Ulsan new port plan which has a channel width of 1.5 times the length of the largest vessel, a radius of 5 times the length of the largest vessel in a curve of 57 degree centerline angle and SBM facility adjacent to the lateral edge of channel. The result of this study shows that the width of the channel and radius of channel curve are suitable for the target ship but the difficulty of ship handling is caused by the large course change and SBM located in the vicinity of channel.