• Journal of Information Display
• /
• 제13권4호
• /
• pp.167-177
• /
• 2012

Cold cathode fluorescent lamps (CCFLs) are used to provide lighting for liquid crystal displays (LCDs). This paper presents a set of guidelines for measurement characterization and design to reduce the power consumption of CCFL LCD backlight inverters and panel electronics. The proposed methods aim to reduce the backlight power consumption by fine-tuning a back-light inverter for a specific LCD, using several methods. First, the authors describe their power measurement methodology; and next, they identify different areas for tuning a backlight inverter for a given display. The experiment results showed that power savings can range from 50 to 200mW if the backlight inverter is properly tuned. This paper also proposes an optimized configuration for light-emitting device (LED) panels to reduce power loss by selecting a LED with a specific input voltage and number of cells to help minimize power loss.

• Structural Engineering and Mechanics
• /
• 제20권1호
• /
• pp.69-83
• /
• 2005

In many cases, underground structures are built using conventional above-grade structural systems to carry gravity load. This paper proposes the use of underground arches, termed "buried arches", to support gravity loads, wherein the horizontal thrust of the arch is equilibrated by soil pressure. Because the horizontal soil pressure increases with depth, the depth of the arch may be reduced as the depth below grade increases. Critical to the success of such an approach is a proper accounting of creep and shrinkage for arches made of reinforced concrete. This paper addresses the influence of equilibrium, creep, and shrinkage as they affect the design of the arch from a theoretical perspective. Several examples illustrate the use of buried arches for the design of underground parking structures.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.592-597
• /
• 2017

Three plastic scintillators of 4.5 cm diameter and 2.5-cm length were fabricated for comparison with commercial plastic scintillators using polymerization of the styrene monomer 2.5-diphenyloxazole (PPO) and 1,4-bis benzene (POPOP). Their maximum emission wavelengths were determined at 426.06 nm, 426.06 nm, and 425.00 nm with a standard error of 0.2% using a Varian spectrophotometer (Agilent, Santa Clara, CA, USA). Compton edge spectra were measured using three gamma ray sources [i.e., cesium 137 ($^{137}Cs$), sodium 22 ($^{22}Na$), and cobalt 60 ($^{60}Co$)]. Energy was calibrated by analyzing the Compton edge spectra. The fabricated scintillators possessed more than 99.7% energy linearity. Light output was comparable to that of the BC-408 scintillator (Saint-Gobain, Paris, France). The fabricated scintillators showed a light output of approximately 59-64% of that of the BC-408 scintillator.

• International Journal of Computer Science & Network Security
• /
• 제21권6호
• /
• pp.237-244
• /
• 2021

Clustering is a most powerful un-supervised machine learning techniques for division of instances into homogenous group, which is called cluster. This Clustering is mainly used for generating a good quality of cluster through which we can discover hidden patterns and knowledge from the large datasets. It has huge application in different field like in medicine field, healthcare, gene-expression, image processing, agriculture, fraud detection, profitability analysis etc. The goal of this paper is to explore both hierarchical as well as partitioning clustering and understanding their problem with various approaches for their solution. Among different clustering K-means is better than other clustering due to its linear time complexity. Further this paper also focused on data mining that dealing with high-dimensional datasets with their problems and their existing approaches for their relevancy

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.25-32
• /
• 2022

This study analyzes the impact of occupational accidents on economic growth and labor productivty losses in Korea between January 2008 and July 2018, using the Vector Error-Correction Model (VECM). According to the analysis, the occurrence of occupational accidents was revealed to reduce the number of employed workers and also hinder economic growth. This can be reinterpreted as the reduction of occupational accidents does not cause labor losses in the industry, rather may induce economic growth. Also, the findings discovered that an increase in the number of workers may lead to increase in the probability of occupational accidents in the short term. This suggests that greater number of work-related accidents may occur during the early stages- due to new employees' lack of knowledge related to safety at workplace.

• Asia pacific journal of information systems
• /
• 제29권3호
• /
• pp.407-413
• /
• 2019

This editorial on 'Smart Services and Internet of Things (IoT)' focuses on the topics related to the applications of IoT to consumer products and services, which have become 'smarter' thanks to IoT. This special issue explores, in different ways, the phenomena of smart services and the role of IoT in business innovation across different contexts such as product-service system, car auction, tourism industry, communicating platform, online travel agency, self-service retail, and bike sharing. We hope that this special issue will provide a significant step forward in enabling researchers and practitioners to understand smart services and IoT.

• 한국동물위생학회지
• /
• 제20권1호
• /
• pp.55-67
• /
• 1997

The morphological development of lungs in fetuses of 60, 90 and 120 days of gestation and neonates of Korean native goats was investigated by light, scanning and transmission electron mictroscope. The results were summarized as follows ; 1. Gross findings ; In the 60-days-old fetus, the lung was developed and differentiated into six lobes. 2. Light microscopic findings : The gland-like bronchioles were formed in loose mesenchyme at 60 days of gestation and the bronchial wall contained smooth muscles. The loose mesenchyme had been replaced by compact parenchymal tissue at 90 days of gestation and the cartilage plates appeared in bronchial wall which contained blood vessels, submucosal glands and smooth muscles. The lung parenchyma consisted of a fine network of alveoli at 120 days of gestation and the bronchial wall contained well-developed blood vessels, submucosal glands, cartilage plates and smooth muscles. In neonates, the lung tissue was similar to the mature lung tissue and the bronchial wall contained well developed cartilage plates. 3. Scanning electron microscopic findings : The epithelial cells lining the tubules were composed of cuboidal or columnar at 60 days of gestation and the epithelial cells lining the large airways were often ciliated : some were covered with stubby microvilli. The epithelial cells lining the canals were cuboidal at 90 days of gestation and the epithelial cells lining the bronchioles were ciliated cells or nonciliated(clara) cells, The clara cells contained row microvilli. The alvealor development of this stage was rapidly progressed ; the subdivision of canals by alveolar crests and assosiated wall attenuation resulted alveoli at 120 days of gestation and the respiratory bronchioles were lined by ciliated or nonciliated epithelial cells. In neonates, the epithelial cells lining the alveolar walls were mainly covered with pneumocyte type I ; Some were covered with pneu-mocyte type II. 4. Transmission electron microscopic findings : The epithelial cells lining the tubules were adhered with tight junction at apical borders of the adjacent cells at 60 days of gestation, which contained few organells and glycogen. The epithelial cells lining the canals were composed mostly of cuboidal cell at 90 days of gestation and the epithelial cells lining of the bronchioles were ciliated of nonciliated cell, which contained few organelles and abundant glycogen. The epithelial cells lining the alveolar walls were composed of pneumocyte type I and a few pneumocyte type II at 120 days of gestation. The epithelial cells lining of the bronchioles were ciliated or nonciliated cells. In neonates, pneumocyte type I was observed as flat and thin cytoplasmic extension in shape. Otherwise, pneumocyte type II was observed as cuboidal type with apical microvilli and contained osmiophillic lamellar inclusion bodies. Putting these various experiment results together, the lung development was slowly progressed at early stage, which was rapidly progressed in the late stage of gestation.

• 생명과학회지
• /
• 제28권12호
• /
• pp.1432-1437
• /
• 2018

클라라 세포에 의해 생산되는 클라라 세포 분비 단백질(CCSP)은 폐를 염증으로부터 보호하는데 중요한 역할을 한다. 이 연구는 CCSP 유전자 발현에 관여하는 프로모터 부위에서 repressor에 결합할 수 있는 cis-element를 밝히는데 있다. DNaseI footprinting법을 사용하여 mCCSP 프로모터의 -812에서 -768 bp (45 bp) 사이에서 3 개의 보호된 motif를 찾았고, 그 중 하나인 D3 모티프(GCCTGGGAA)는 다른 3 가지 동물들과 염기서열이 100% 일치하였다. 45 bp를 사용한 EMSA 분석에서 D3 모티프(GGCCTGGGAA)는 45 bp에 높은 경쟁을 보였으나, 변이된 D3 모티프가 ($G{\underline{AA}}TG{\underline{TT}}AA$)를 사용되었을 때, 경쟁은 상당히 감소되었다. 이는 mCCSP 프로모터의 45 bp의 D3 모티프가 단백질과 DNA 상호 작용을 위한 중요한 element임을 시사한다. -756-Luc과 -812-Luc을 이용한 transient transfection 분석 결과, -756-Luc은 -812-Luc보다 CCSP의 발현이 현저하게 감소되었다. 이는 mCCSP 프로모터의 45 bp부위가 repressor의 결합 부위로서 기능을 할 수 있음을 의미한다. -812-Luc에 KLF4를 co-transfection 한 결과, KLF4는 CCSP 발현을 현저하게 저해(repression)함을 밝혔다. 그러나 -768-Luc이 사용되었을 때 KLF4에 의한 repression은 관찰되지 않았다. 이것은 KLF4가 CCSP 유전자의45 bp에 결합할 수 있고, 전사 억제자 역할을 하여 mCCSP 발현을 억제 할 수 있음을 명확히 보여 준다. 또한 이는 45 bp 중, D3 모티프가 KLF4의 결합에 강하게 관여 함을 시사한다. 이 반응에 KLF4에 대한 항체가 첨가되었을 때는 super-shifted 밴드가 관찰되었으나, SP1에 대한 항체가 사용되었을 때는 관찰되지 않았다. 이는 KLF4가 CCSP 프로모터의 45 bp 영역에 결합하여 repressor기능 할 수 있고, D3 모티프가 KLF4의 특이적 결합에 관여 할 수 있음을 시사한다.

• 지능정보연구
• /
• 제13권3호
• /
• pp.31-45
• /
• 2007

대용량의 데이터 처리에 관한 문제는 데이터 마이닝 내 중요한 이슈 중의 하나이다. 특히 데이터 클러스터링과 같이 컴퓨터 시뮬레이션으로 인한 부하가 큰 경우 더더욱 그러하다. 그러나 대개 이러한 문제는 Random sampling 으로 어느 정도 해결이 가능하다. 문제는 이런 샘플링을 통해서 발생하는 noise의 해결이다. 본 논문에서는 그러한 noise문제를 극복할 수 있도록 설계된 새로운 데이터클러스터링 알고리즘을 소개한다. 기존의 데이터 클러스팅 알고리즘과의 컴퓨터 비교 실험을 통해 본 알고리즘의 우수성을 밝혔으며 아울러 더 나아가 데이터 set의 일부만을 사용한 시뮬레이션 결과를 통해, 해의 정확도와 상관없이 실험 시간 또한 단축되었음을 보여주고 있다.

• ETRI Journal
• /
• 제39권3호
• /
• pp.373-382
• /
• 2017

A new internally compensated low drop-out voltage regulator based on the cascoded flipped voltage follower is presented in this paper. Adaptive biasing current and fast charging/discharging paths have been added to rapidly charge and discharge the parasitic capacitance of the pass transistor gate, thus improving the transient response. The proposed regulator was designed with standard 65-nm CMOS technology. Measurements show load and line regulations of $433.80{\mu}V/mA$ and 5.61 mV/V, respectively. Furthermore, the output voltage spikes are kept under 76 mV for 0.1 mA to 100 mA load variations and 0.9 V to 1.2 V line variations with rise and fall times of $1{\mu}s$. The total current consumption is $17.88{\mu}V/mA$ (for a 0.9 V supply voltage).