• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.81-92
• /
• 2011

The rheological properties of Wyoming bentonites are strongly influenced by the size of particles, cation exchangeable capacity, arrangement and morphology of clay mineral. This paper presents the results of rheological investigations on the Wyoming bentonites aqueous dispersions: two types of particle flocculation were considered. For the Wyoming bentonite, 0g/L and 30g/L NaCl equivalent salinity were added in fresh and salt water to examine the rheological behavior. This paper examined the general rheological characteristics, compatibility of rheological models and correlation between soil structure and change in rheological properties of Wyoming bentonite caused by increasing salinity. From flow curves of bentonites hydrated with fresh water and salt water, the observed general flow behavior is very close to shear thinning with yield stress (or ideal Bingham fluid with yield stress and plastic viscosity). However, the change of shear stress at the same shear rate is clear, particularly for lower shear rate. Well-known rheological models are used to fit the data. There is a good agreement between rheological model and data: Carreau, Herschel-Bulkley and power-law for S=0g/L and bilinear, Herschel-Bulkley and power-law for S=30g/L. It may be due to the fact that the internal structural bonding (strong modification of particle-particle interactions from edge-to-edge and/or edge-to-face to face-to-face) in soil matrix is affected from the evolution of rheological properties with different salinities.

• Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.351-355
• /
• 1999

In order to find anti-dementia drugs from natural products, prolyl endopeptidase inhibitors were purified from Puerariae Flos by consecutive solvent partition, followed by silica gel, Sephadex LH-20, and HPLC. Four isoflavonoid inhibitors were isolated and identified as tectorigenin, genistein, 5,7-dihydroxy-4',6-dimethoxyisoflavone, and 5-hydroxy-6,7,4'-trimethoxyisoflavone by means of instrumental analyses including $^{1}H-$, $^{13}C-$, $^{2}D-NMR$ and MS and $IC_{50}$ values against PEP were 5.30 ppm$(17.7\;{\mu}M)$, 10.39 ppm$(38.5\;{\mu}M)$, 13.92 ppm$(44.3\;{\mu}M)$, and 20.61 ppm$(62.8\;{\mu}M)$, respectively. Some previous mistakes in $^{13}C-NMR$ assignment were revised by careful investigation of HMBC and HMQC data.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.203-203
• /
• 2017

The Earth's climate is rapidly changing because of increasing carbon dioxide content in atmosphere so, climate prediction models anticipate that earth surface temperature will rise by 3 to $5^{\circ}C$ in next 50 to 100 years. Therefore, frequency of un-expected weather events such as drought, salinity, low or high temperature and flooding etc. will be increasing worldwide. Furthermore, increased atmosphere temperature can influence pests and pathogens spread as well. Therefore, to protect enormous grain loss from unexpected weather conditions, studies related with combine stress conditions like abiotic plus biotic stress condition are really required. Thus, our research focused on physiological responses under combined abiotic and biotic stress condition in rice plant. To induce uniform stress condition, we used NaCl (100 mM) and salicylic acid (0.5 and 1.0 mM SA) as each stress a stimulator. Each artificial abiotic and biotic stress inducer was applied to hydroponically grown rice seedlings alone or together for four day. The data were collected in a time-dependent manner [1, 2, 3 and 4 day(s) after treatment (DAT)] and were matched with our anticipation that shoot length and shoot fresh weight was decreased in solo and combined abiotic and biotic stress condition. The lipid peroxidation content was significantly increased ($1.5{\pm}0.2$ to $2.7{\pm}0.1mg$ mg of $MDA\;g^{-1}FW$) in the first two days in both stress exposed plants, and showed the opposite trend ($0.5{\pm}0.01$ to $0.1{\pm}0.001mg$ of $MDA\;g^{-1}FW$) in last two days under multi stress condition. Superoxide dismutase (SOD) activity did not showed difference in only biotic stress condition (alone 0.5 and 1.0 mM SA) as compared to control however, it was significantly increased in multi stress condition or solo abiotic stress condition whereas, catalase (CAT), and ascorbate peroxidase (APX) activities were significantly decreased in solo biotic and combined abiotic and biotic condition. In particular, both enzymes activities were more decreased in multi stress condition as compared to solo biotic stress condition. The results for relative mRNA expression level of CAT and APX enzymes were in agreement with results of spectrophotometric values. Correlation value between each stress condition and phenotypic data showed that biotic stress condition showed high correlation with activity of CAT and APX whilst, abiotic stress condition revealed significant correlation with SOD activity.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.129-139
• /
• 1999

Hydrothermal gold deposits of the Trabong district in Vietnam occur as single-stage quartz $\pm$ calcite veins (0.3-1.2 m thick) which fill fault fractures in graphite-bearing gneiss and schist of the Chulai Complex and Kham Duc Formation of the Proterozoic age. Ore grades are 1.3 to 92.4 g/ton Au. Ore mineralogy is very simple, consisting mainly of pyrite with minor amounts of base-metal sulfides and electrum. Gold grains occur in two assemblages as follows: (1) early, Fe-rich (7.2-10.4 mole % FeS) sphalerite + electrum (50.4-64.3 atom % Au) assemblage occurring as inclusions in pyrite; (2) late, Fe-poor «4.7 mole % FeS) sphalerite + galena + electrum (47.6-81.7 atom % Au) assemblage occurring along fractures of pyrites. Based on fluid inclusion data and thermochemical considerations of ore mineral assemblages, ore minerals were formed at high temperatures (about $230^{\circ}C$ to $420^{\circ}C$) from $H_{2}O-CO_{2}(-CH_{4})$-NaCI fluids with the sulfur fugacity of about $10^{-6}$ to $10^{-10}$ atm. Fluid inclusion data also indicate that ore mineralization occurred mainly as a result of fluid unmixing accompanying $CO_2$ effervescence. Calculated oxygen and measured hydrogen isotope compositions of mineralizing waters (${\delta}^{18}O_{V-SMOW}$ values = 5.3 to 8.6$\textperthousand$, ${\delta}D_{V-SMOW}$ values = - 60 to - 52$\textperthousand$), along with the sulfur isotope compositions of vein sulfides (${\delta}^{34}S_{CDR}$ values = - 1.2 to 2.8$\textperthousand$) and carbon isotope compositions of inclusion $CO_2$ (${\delta}^{13}C_{PDB}$ values = - 4.7 to - 2.0$\textperthousand$) indicate that the high temperature (mesohypothermal) gold mineralization formed from a magmatic fluid.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.606-615
• /
• 2010

This study aims to identify the characteristics of soil in Mongolia, one of the major Asian dust sources that influence the Korean Peninsula. Soil particle size was analyzed and the result shows that sand (57.5~97.3%) was identified prominently in most regions, followed by silt (2.5~34.7%) and clay (0.0~7.8%). Soil pH of the covered regions were in the range 7.1~10.1, either weak alkaline or strong alkaline. Analysis of ion species in the soil samples exhibited that $Na^+$ ($91.9\;mg\;kg^{-1}$), $Cl^-$ ($65.9\;mg\;kg^{-1}$), and $Ca^{2+}$ ($53.5\;mg\;kg^{-1}$) were detected more in the soil than other species such as ${SO_4}^{2-}$ ($19.2\;mg\;kg^{-1}$), ${NO_3}^-$ ($46.6\;mg\;kg^{-1}$), ${NH_4}^+$ ($3.9\;mg\;kg^{-1}$), $K^+$ ($22.0\;mg\;kg^{-1}$), and $Mg^{2+}$ ($10.2\;mg\;kg^{-1}$). As for heavy metal content in the soil, concentrations of soil-borne metals including Fe, Al, Ca, Mg, and K tended to be high, while metals that come from manmade sources Pb, Cd, Cr, V, and Ni were remarkably low. The concentration of organic carbon (OC) was relatively high at $15.9\;{\mu}g\;mg^{-1}$, while elemental carbon (EC), directly released in the process of fossil fuel combustion, was not detected at all or found in very small amounts. The result indicates that pollution from manmade sources scarcely occurred. The analysis results from this study may contribute to improving modeling accuracy by providing input data for Asian dust prediction models, and be used as base data for determining the process of physiochemical transformation of Asian dust during long-range transport.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.202-210
• /
• 1983

In order to elucidate the taste compounds of Korean catfish, Parasilurus asotus, free amino acids, nucleotides and their related compounds, organic bases, sugars, organic acids and minerals in the extracts of Korean catfish were analyzed, and then evaluated by sensory test of synthetic extract prepared on the basis of the analytical data. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in taste profile were assessed. In free amino acid composition, glycine was dominant occupying $25\%$ of total free amino acids. The other abundant free amino acids were lysine, taurine and alanine. Judging from the result of analysis of nucleotides, IMP was dominant showing about $70\%$ of total nucleotides while ATP, ADP, AMP, inosine and hypoxanthine were low in content. Among organic bases, total creatinine was abundant and its nitrogen content occupied more than $50\%$ of the total extractive nitrogen. The amount of betaine was 18mg/100g and trace amount of trimethylamine and trimethylamine oxide were detected. The main organic acids were succinic, butyric, propionic and valeric acid. On the other hand, oxalic, fumaric, maleic, tartaric and citric acids were analyzed in trace. As for the sugars, glucose was found to be the most abundant monosaccharide. Extremely small amounts of fructoae, inositol were also detected and ribose and arabinose were trace in content. $K^+,\;Na^+,\;PO_{4}^{3-}$ and $Cl^-$ were found to be the major ions and small amount of $Ca^{2+}$ were defected. The synthetic extract, prepared with about 40 pure chemicals based on the analytical data satisfactorily revealed the natural taste of the original extract except slight difference in meaty taste and mildness. From the results of omission test the major components which contribute to produce the taste were serine, IMP, succinic acid and $PO_{4}^{3-}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.7
• /
• pp.938-943
• /
• 2007

This study investigated the hazard analysis of ready-to-eat sandwiches sold in various establishments. Sandwich samples were collected from convenience stores, discount stores, sandwich chain stores, bakery shops, fast-food chain stores, and food service operations located in Daegu and Gyeongbuk. Out of 174 samples, 18 (10.3%) contained coagulase positive staphylococci with counts ranging from 0.30 to 4.08 log CFU/g. There was significant seasonal difference in Staphylococcus aureus isolation; the average count in summer (3.24 log CFU/g) was 3 times higher than that of winter (1.10 log CFU/g) (P<0.001). According to the microbiological guidelines of PHLS for ready-to-eat foods, 95.4% of the samples were acceptable. As a result of enterotoxin producing experimental data ($35^{\circ}C$, pH 5.8, NaCl 0.5%), enterotoxin was not produced in a sandwich until Staphylococcus aureus increased to a level greater than 4.95 log CFU/g. This microbiological hazard analysis data could be applied to future studies on quantitative risk assessment of ready-to-eat foods.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.1
• /
• pp.75-81
• /
• 1999

The beneficial effect of glucose and phosphate ions in culture medium on the development of human embryos in vitro has not been fully elucidated. The purpose of this study was to evaluate the influence of fertilization and culture of embryos in glucose/phosphate-free m-TALP medium on pregnancy rates in IVF-ET program. The patients in 244 IVF-ET cycles received GnRH agonist + HMG regimens. A does of 10,000 IU HCG was administered when two or more dominent follicles reached 18mm in diameter. Thirty-six hours after HCG, oocytes were recovered transvaginally using ultrasound guidance. Aspirated oocytes were matured for 4 to 6 h in TCM-199 supplemented with 10% follicular fluid (FF). Insemination was carried out with 50,000 motile spermatozoa in TCM-199 + 10% FF or m-TALP + 5% FF + 5% fetal cord serum (FCS) according to experimental design. After 6 h, oocytes were washed 3 to 4 times and cultured in each fresh medium. After 20 h, oocytes were freed from cumulus/corona cells and examined for the presence of pronuclei. Fertilized oocytes were transferred into each co-culture drops and cultured for further incubation. On day 3, embryo transfer was performed with grade 1 and 2 embryos. Monolayers for co-culture of embryos were prepared by plating $1{\times}10^5$ cumulus cells/ml in 10ul drop of TCM-199 + 10% FF or m-TALP + 5% FF + 5% FCS media 24 h prior to the onset of co-culture. Development to 4 to 16 cell stage was observed at 70x magnification following two days of incubation. Pregnancy was confirmed by detecting increasing serum ${\beta}$-hCG concentrations for 11 days following embryo transfer. Data were analyzed by ${\chi}^2$-test. Oocytes from 244 IVF-ET cycles were randomized. The number of cycles and mean age of patients were 97 and 147, 31.3 yrs and 31.2 yrs for TCM-199 (control) and m-TALP groups, respectively. The mean number of retrieved oocytes/cycle, fertilization rates, number of embryos transferred/ET and pregnancy rates were 11.1 and 10.3, 65.1% and 67.3%, 4.1 and 4.7, 28.9% and 43.8% for TCM-199 and m-TALP groups, respectively. Differences in the pregnancy rates were found between control and m-TALP groups (p<0.05). The pregnancy rate of patients divided according to maternal age groups of ${\leq}30$, 31-35, $36{\leq}$ were 44.4% and 49.0%, 26.1% and 41.3%, 29.2% and 41.2% for control and m-TALP groups, respectively. These data indicate that culture of human embryos in glucose/phosphate-free m-TALP medium improves pregnancy rates.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.75-84
• /
• 2021

In this study, the correlation between cement quality(chemical composition, mineral composition, and compressive strength) and amount of waste alternative fuels used in the cement manufacturing process and was investigated. Cement manufacturing facility using coal, soft plastics(plastics that are easily scattered by wind power, such as vinyls), hard plastics(plastics that do not contain foreign substances, waste rubber, PP, etc.) and reclaimed oil was analised. Data was collected for 3 years from 2017 to 2019 and let the amount of fuels used as an independent variable and cement quality data as a dependent variable. As a result, depending on the type and quality of the alternative fuel has not a significant effect on the chemical composition(Cl and LSF) and mineral composition(f-CaO, C3S contents). Contrary to the concern that the compressive strength of cement would decrease, there was a significant positive correlation between amount of alternative fuel used and cement compressive strength.