• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (B)
• /
• pp.262-264
• /
• 2002

In this paper we focused on the color representation prob1em based on fuzzy set theory. The main factor is the determination or computation of color membership function and color difference formula. The mathematical formula to calculate the color difference should generate a uniform color scaling, and due to this reason we adopted a CIELAB color- space as a fundamental feature space. With the help of the CIELAB color space we created a new color model, referred to fuzzy color model, which can represent the ambiguous characteristics underlying colors. Based on the proposed color difference formula between fuzzy colors, we could obtain the membership computation method of an arbitrary color for a given color family.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.23-29
• /
• 2005

대표적인 고부가가치 목질판상 재료인 마루판은 육안 분류 작업에 의한 오차로 마루판 시공 시에 무늬목간의 색상 차가 생기고 있다. 이는 조건등색(metamerism)에 의해 식별 후 혹은 마루판 시공 시에 오차가 큰 것으로 나타났다. 따라서 본 연구에서는 Light와 Dark 두 단계로 육안 식별한 피나무, 자작나무, 단풍나무 3수종의 무늬목을 사용한 마루판을 CIELAB를 이용하여 분류하고, CIERGＢ에서 각각의 문턱 값(threshold)을 조사하고, 인간의 색 인지에 기반을 둔 HSI (hue, saturation, intensity)색상모델을 응용하여 색상, 채도, 명도 값의 범위를 조사하였다. HSI색상모델의 색상과 채도, 명도를 이용하여 마루판의 색상분류에 사용할 경우 명도 값을 이용하는 것이 유리할 것으로 보인다. 그리고 색상의 범위가 3종류 모두 $45{\sim}55^{\circ}$ 사이 범위 값을 가지고 있는 것으로 보이며, RGB성분의 문턱값을 이용한 분류의 경우 특정 색상 성분 값만으로는 마루판 무늬목의 분류가 어려울 것으로 보인다.

• 대한전자공학회논문지SP
• /
• 제44권6호
• /
• pp.35-46
• /
• 2007

본 논문은 불필요한 잉크의 양을 줄이기 위하여 전체 잉크량 제한과 도트 가시성 순서에 기반한 6색 분리 방법을 제안한다. 첫 번째, 입력 RGB 이미지의 CIELAB 값이 컬러 혼합 모델을 이용하여 추정되고 미리 정한 색차 허용 범위 내의 CMYKlclm 색료의 모두 조합에 해당하는 CIELAB 값과 비교되어, 그 결과 초기 CMYKlclm 후보군이 선택된다. 그 다음, 전체 잉크량 제한이 과도하게 사용된 잉크량을 줄이기 위해 초기 CMYKlclm 후보군에 적용되고, 최후의 CMYKlclm 후보군이 C, M, Y, K, lc, lm의 도트 가시성 순서에 기반하여 어두운 영역에 사용된 묽은 사이안과 묽은 마젠타의 사용량을 줄임으로써 결정되어진다. 실험에서는 제안된 방법이 좋은 이미지 품질을 유지하면서 과도한 잉크 사용량을 줄인 것을 보여준다.

• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.29-40
• /
• 2000

Recently. color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reproduction models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka-Munk, relaxed version of spectral Neugebauer. In such results, the Kubelka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.25-34
• /
• 2000

Recently, color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reprodution models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka--Munk, relaxed version of spectral Neugebauser. In such results, the Kubleka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.33-41
• /
• 2004

본 논문에서는 모니터와 모바일 디스플레이간의 복잡한 색 정합 과정을 단순화시키는 3차원의 색 정합 look-up table(LUT)을 설계하였다. 색 정합을 위해서는 우선 영상의 색을 CIEXYZ 혹은 CIELAB 등의 장치 독립적인 색 공간에서 처리하여야 한다. 장치 의존적인 RGB 색 공간의 데이터에서 장치 독립적인 색 공간의 데이터를 얻기 위해서는 디스플레이 특성화 과정이 필요하다. 기존의 S-curve 모델을 이용하여 LCD를 특성화 하면 LCD의 비선형적인 계조 특성으로 인해 특성화 오차가 허용 오차보다 커지게 된다. 본 논문에서는 X, Y, Z의 전기-빛 입출력 특성을 이용하여 S-curve 모델의 특성화 오차를 줄였다. 또한 모니터와 모바일 디스플레이간의 색 정합을 수행함으로써 색 표현력이 향상된 영상을 모바일 디스플레이에서 획득할 수 있었으며, 실험을 통하여 허용오차 내의 색 정합 LUT의 최소 크기가 64(4×4×4)라는 것을 확인하였다.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2005

The propose of this study investigated the reproduction of color image on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result shows that netural color is increasing the decrease range of luminance black color than white color. These results concern correct in the context display of color reproduction.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.45-58
• /
• 2005

The propose of this study investigated the reproduction of color image displayed on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of the CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result show that neutral color is increasing the decrease range of luminance black color than white color. These results are of concern in the context of the "correct" display of color reproduction.