• 한국안광학회지
• /
• 제5권1호
• /
• pp.31-37
• /
• 2000

제1~3색각 이상 검사용 Farnsworth Dichotomous Test Panel D-15의 칼라분석을 위하여 380~780 nm의 반사광 spectrum 세기를 측정하여 CIE system을 도입하였다. Panel D-15의 색상변환은 650nm 이상, 500~600 nm, 400~450 nm의 3개 파장영역의 광 반사율 세기에 의존한다. 반사 spectrum으로부터 3극치 X, Y, Z 값, 보색 평면과 명암축으로 하는 3차원 CIELAB system의 $L^*a^*b^*$와 Lab 값, CIELUV system $U^*V^*$ 값, 색도도 좌표 x, y 값을 구했다.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.353-360
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권4호
• /
• pp.272-280
• /
• 2015

This paper proposes color databases that can be used for various purposes for people with a color vision deficiency (CVD). The purpose of this paper is to group colors within the sRGB gamut into the CIE $L^*a^*b^*$ color space using the Brettel algorithm to simulate the representative colors of each group into colors visible to people with a CVD, and to establish a confusion line database by comparing colors that might cause confusion for people with different types of color vision deficiency. The validity of the established confusion lines were verified by using an Ishihara chart. The different colors that confuse those with a CVD in an Ishihara chart are located in the same confusion line database for both protanopia and deutanopia. Instead of the 3D RGB color space, we have grouped confusion colors to the CIE $L^*a^*b^*$ space coordinates in a more distinctive and intuitive manner, and can establish a database of colors that can be perceived by people with a CVD more accurately. Editor - Highlight - Do these changes reflect the intended meaning? If not, please rephrase as intended.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.837-840
• /
• 2014

Novel materials of $Zn(HPB)_2$ and Ir-complexes were respectively synthesized as blue or red emitting material. White Organic Light Emitting Diodes (OLED) were fabricated by using $Zn(HPB)_2$ for a blue emitting layer, Ir-complexes for a red emitting layer and $Alq_3$ for a green emitting layer. White OLED was fabricated by using double emitting layers of $Zn(HPB)_2$ and $Alq_3:Ir$-complexes, and hole blocking layer of BCP. We also varied the thickness of BCP. When the thickness of BCP layer was 5 nm, white emission was achieved. We obtained a maximum luminance of $3,500cd/m^2$. The CIE coordinates was (0.375, 0.331). From this study, we could propose that the hybrid structure is efficient in lighting application of white OLED by improvement of color purity.

• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.138-145
• /
• 2007

발광형 교통안전표지는 안개가 잦은 곳, 야간 교통사고가 많이 발생하거나 발생가능성이 높은 곳, 도로의 구조로 인하여 가시거리가 충분히 확보되지 않은 곳 등과 같은 장소에서 제한적으로 사용하도록 규정 되었다. 현재 발광형 교통안전표지는 LED가 사용되고 있으나, 향후 새로운 교통안전표지용으로 유기발광다이오드를 제안하였다. 소자의 구조는 $ITO/2-TNATA(500{\AA})/{\alpha}-NPD(200{\AA})/DPVBi(300{\AA})/BCP(10{\AA})/Alq3(200{\AA})/LiF(10{\AA})/Al:Li(1000{\AA})$로 하였다. 인가전압 10 V에서 전류밀도는 $240.71mA/cm^2$, 휘도는 $10,550cd/m^2$, 발광효율은 3.53cd/A이었다. $N_2$ 가스가 주입된 플라즈마로 전처리한 ITO 표면을 갖는 소자가 플라즈마 전처리되지 않은 ITO 표면을 갖는 소자보다 특성이 향상되었다. EL 스펙트럼의 최대 발광 파장은 456nm이었고 색좌표값은 x=0.1449, y=0.1633으로 NTSC 색좌표 Deep blue 영역(x=014, y=0.08)에 근접한 순수한 청색에 가까운 값을 얻었다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.122-126
• /
• 2010

In this article photoluminescence of the $Al_2O_3:xCr_2O_3$ solid solutions prepared by solid state reaction method are represented. The effect of $Cr_2O_3$-activator concentration and heat treatment time on the PL characteristics have been discussed in conjunction with microstructure of phosphor samples. The $Al_2O_3:xCr_2O_3$ phosphors show the highest PL intensity at x=0.003 mole when the samples are reacted at $1600^{\circ}C$ for 5 h. The PL emission and absorption spectra show the maximum peaks at 698 nm and at 398 nm respectively. The CIE color coordinate is (x=0.646, y=0.316) at 0.003 mole $Cr_2O_3$, which value is very close to the NTSC coordinate of red color. This characteristic feature of $Al_2O_3:xCr_2O_3$ has been applied for an additive to improve the color characteristic of other red phosphor $LiEuW_2O_8$ which has a relatively poor color purity with an emission peak centered at 615 nm and with a CIE coordinate (x=0.530, y=0.280). The $Al_2O_3:0.003Cr_2O_3$ phosphor has been mixed with the $LiEuW_2O_8$ phosphor powder and the PL characteristics and CIE color coordinates are characterized. The $Al_2O_3:xCr_2O_3$ phosphor was found effective for improving the CRI (color rendering index) of $LiEuW_2O_8$ phosphor.

• 공업화학
• /
• 제21권5호
• /
• pp.559-563
• /
• 2010

천연색소를 이용한 컬러의 재현은 현대의 웰빙 생활과 밀접한 연관성을 갖게 된다. 이 연구는 일상생활에서 자주 쓰이는 녹색 계, 황색 계, 그리고 적색 계의 컬러를 자연 상의 녹차, 치자, 흑미를 색소원으로 하여 목표 색을 설정하였다. 목표색의 명도(L), 색 좌표(a, b)의 정량적 수치 값을 지정하고 추출용매의 물성을 조절함으로써 목표 색에 가장 접근하는 색을 추출하여 표현하였다. 색소추출 공정에서 용매의 pH, 추출온도, 추출시간이 변수로 설정되었다. 치자의 경우 추출시간이 길수록 진한색이 추출되었다. 추출색소는 색차계를 이용해 색의 L-a-b좌표를 측정하여 목표 색과 비교하였다. 실험조건을 최적화함으로써 목표 색과 가장 색차 값(${\Delta}E$)이 적은 녹색, 황색, 적색의 CIE 기준 값을 제시하고 이 좌표에 맞는 색을 표현하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.620-622
• /
• 2004

In this study, a mono-chelated compound as novel blue light emitting material, $BPh_2$(pbi) (pbi = 2-(2-Pyridyl)benzimidazole) was synthesized Organic light emitting Diodes (OLEDs), which has a ITO/NPB(40 nm)/Boron(30 nm)/$Alq_3$(1 nm)/Liq(3 nm)/Al(150 nm) structure, has been fabricated. The maximum brightness of the device is up to about 900 cd/$m^2$ and 0.54 cd/A at 11.5 V. The EL peaks and CIE coordinates of our OLEDs is 457 nm and (0.26, 0.29), respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.579-581
• /
• 2004

A new DCM derivative containing the phenoxazine moiety (DCPXZ) has been synthesized for use as a red fluorescent dye molecule in organic light-emitting diodes (OLEDs). The photoluminescence and electroluminescence properties of DCPXZ were examined. The maximum photoluminescence of DCPXZ in chloroform solution ($10^{-5}$ mol) was observed at 616 nm. EL devices were fabricated with the structure ITO/PEDOT-PSS/Cu-PC(15nm)/${\alpha}$-NPD(45nm)/$Alq_3$:DCPXZ(30nm)/$Alq_3$(30nm)/LiF(0.5nm)/Al. The maximum EL emission for the 2.0% DCPXZ-doped device was at 608 nm with CIE coordinates (0.57, 0.42). The EL device exhibited a maximum brightness of 15,000 cd/$m^2$ at 19.4 V and a power efficiency of 1.04 lm/W at a luminance of 100 cd/$m^2$.