• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.17-23
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.24-31
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.

• Clinical and Experimental Pediatrics
• /
• 제51권8호
• /
• pp.827-833
• /
• 2008

목 적 : 영유아기에 발생하는 철 결핍성 빈혈은 성장, 발달에 심각한 영향을 미칠 수 있으므로 철 결핍을 조기 진단하는 것은 매우 중요하다. 고식적으로 사용되고 있는 혈청 ferritin이나 iron 대신 염증이나 만성질환 등에 영향을 받지 않고 철 결핍 상태를 진단하는데 비용이나 혈액채취량의 부담을 줄일 수 있는 장점이 있는 망상적혈구혈색소량을 다른 철 결핍 지표들과 함께 비교하였다. 방 법 : 2006년 6월부터 2007년 1월까지 을지대학병원 소아과에 급성 감염성 질환으로 입원한 생후 6개월에서 24개월 영유아를 대상으로 하였다. 정맥혈을 채혈하여 ADVIA 120 (Bayer Diagnostics, NY, USA)을 이용하여 Hb, MCV, MCH, CH, CHr, RDW를 검사하였고, 철 상태를 평가하기 위하여 iron, iron binding capacity, ferritin을 측정하였다. 혈색소 11 g/dL, Tfsat 20%를 기준으로 철 결핍성 빈혈군, 철 결핍군, 철 결핍이 없는 군을 나누었다. 결 과 : 총 69명의 영유아 중 철 결핍이 있는 환아가 47명, 이중 17명이 철 결핍성 빈혈군에 해당되었으며 철 결핍이 없는 군이 22명이었다. 빈혈을 포함한 철 결핍이 있는 집단과 철 결핍이 없는 군과는 MCH (P<0.01), CH (P<0.01), RDW (P<0.05) 및 CHr (P<0.01)이 유의하게 차이가 있었지만, ferritin은 두 집단 간에 차이가 없었다(P=0.109). CHr은 철결핍에 유의한 예측변수로 나타났다(LRT=71.25; odds ratio=0.67 [95% 신뢰구간, 0.47-0.97]; P<0.05). 철 결핍군을 빈혈이 있는 집단과 빈혈이 없는 집단과 비교하였을 때 MCV, MCH, CH, RDW가 유의한 차이를 보였다(모두 P<0.05). 또한 CHr, iron, TIBC, ferritin은 두 군간에 차이가 없었다(P>0.05). CHr의 cutoff 27.4 pg을 기준으로 전체 집단을 구분하여 비교하였을 경우에는 Hb, MCH, CH, Tfsat, iron (모두 P<0.05) 모두 통계적으로 유의한 차이를 보였으나 MCV (P=0.188), RDW (P=0.138), ferritin (P=0.730), TIBC (P=0.700)는 차이를 보이지 않았다. 결 론 : CHr은 일부 기종에 국한되어 제공되는 사항이고 적절한 참고치의 설정이 필요하지만, 6개월에서 24개월령의 유소아에서 철 결핍 상태를 진단하는데 급성염증반응에 영향을 받지 않고, 비용이나 혈액채취량의 부담을 줄일 수 있는 장점이 있어 새로운 지표로 이용이 가능하리라 생각된다.

• 한국시뮬레이션학회논문지
• /
• 제12권2호
• /
• pp.35-44
• /
• 2003

The effectiveness of buffer cache replacement algorithms is critical to the performance of I/O systems. In this paper, we propose the degree of inter-reference gap (DIG) based block replacement scheme that retains merits of the least recently used (LRU) such as simple implementation and good cache hit ratio (CHR) for general patterns of references, and improves CHR further. In the proposed scheme, cache blocks with low DIGs are distinguished from blocks with high DIGs and the replacement block is selected among high DIGs blocks as done in the low inter-reference recency set (LIRS) scheme. Thus, by having the effect of the partitioning the cache memory dynamically based on DIGs, CHR is improved. Trace-driven simulation is employed to verified the superiority of the DIG based scheme and shows that the performance improves up to about 175% compared to the LRU scheme and 3% compared to the LIRS scheme for the same traces.

• 산업융합연구
• /
• 제18권2호
• /
• pp.69-75
• /
• 2020

산업용 IoT는 비용 효율적이고 넓은 커버리지를 제공하는 무선 메쉬 네트워크에 관심이 많았다. 하지만, 무선 메쉬 네트워크는 멀티홉 환경의 심각한 성능 절하를 겪는다. 이를 극복하기 위해 메쉬 라우터에 캐시를 장착하는 연구가 많았으나 캐시 파워 소모 모델 연구는 적었다. 최근 캐시 파워 효율 기반 모델은 캐시까지 콘텐츠 전달 파워를 모두 측정했기 때문에 무선 메쉬 네트워크에서 쓰기에 부적절합니다. 본 논문은 CPU의 동작속도가 캐시 크기에 비례한다는 사실을 이용하여 캐시 적중률 기반 파워 소모 모델을 제안하고, 기존 캐시 파워 효율 기반 소모 모델과 비교하여 정확하게 측정되었다. 제안된 캐시 적중률 기반 파워 소모 모델은 산업용 IoT에서 무선 메쉬 네트워크를 구성할 시 에너지 효율적인 캐시 운용을 위한 참조 모델로 활용되길 기대합니다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.202-202
• /
• 2022

Recently days, soybean production in paddy field is increasing, from 4,422 ha in 2016 to 10,658 ha in 2021 in Korea. It is easy for Phytophthora stem and root rot (PSR) occurring in paddy field condition, when it is poorly drained soils with a high clay content, and temporary flooding and ponding. Therefore PSR resistant soybean cultivar is required. The objective of this study is to identify QTL region and candidate genes relating to PSR resistance of the race in main soybean cultivation area in Korea. 210 soybean materials including cultivars and germplasm were used for inoculation and genome-wide association study (GWAS). Inoculation was conducted using stem-scar method with 2 replications in 2-year for the race 3053 from Kimje and 3617 from Andong. 210 materials were genotyped with Soya SNP 180K chip, and structure analysis and association mapping were conducted with QTLMAX V2. The results of inoculation showed that survival ratio ranged from 0% to 96.7% and mean 9.7% for 3053 and ranged from 0% to 100% and mean 7.6% for 3617. Structure analysis showed linkage disequillibrium (LD) was decayed below r²=0.5 at 335kb of SNP distance. Significant SNPs (LOD>7.0) were identified in Chr 1, 2, 3, 4, 5, 11, 14, 15 for 3053 and Chr 1, 2, 3, 7, 10, 14 for 3617. Especially, LD blocks (AX-90455181;15,056,628bp~AX-90475572;15,298,872bp) in Chr 2 for 3053 and 3067 were duplicated. 29 genes were identified on these genetic regions including Glyma.02gl47000 relating to ribosome recycling factor and defense response to fungus in Soybase.

• Molecular & Cellular Toxicology
• /
• 제5권3호
• /
• pp.216-221
• /
• 2009

Bisphenol A (BPA) is commonly used in the production of pharmaceutical, industrial, and housing epoxy, as well as polycarbonate plastics. Owing to its extensive use, BPA can contaminate the environment either directly or through derivatives of these products. BPA has been classified as an endocrine disruptor chemicals (EDCs), and the primary toxicity of these EDCs in males involves the induction of reproductive system abnormality. First, in order to evaluate the direct effects on the Y chromosome associated with reproduction, we evaluated Y chromosome abnormalities using a Y chromosome microdeletion detection kit. However, we detected no Yq abnormality as the result of BPA exposure. Secondly, we performed high-density oligonucleotide array-based comparative genome hybridization (CGH) to assess genomic alteration as a component of our toxicity assessment. The results of our data analysis revealed some changes in copy number. Seven observed features were gains or losses in chromosomal DNA (P-value<1.0e-5, average log2 ratio>0.2). Interestingly, 21 probes of chr7:7312289-10272836 (qA1-qA2 in cytoband) were a commonly observed amplification (P-value 3.69e-10). Another region, chr14:4551029-10397399, was also commonly amplified (P-value 2.93e-12, average of log2 ratios in segment>0.3786). These regions include many genes associated with pheromone response, transcription, and signal transduction using ArrayToKegg software. These results help us to understand the molecular mechanisms underlying the reproductive effects induced by BPA.

• 한국환경과학회지
• /
• 제15권5호
• /
• pp.397-403
• /
• 2006

Compositional characteristics and origin of polycyclic aromatic hydrocarbons(PAHs), which should be strongly regulated for environmental protection in the crude oils and petroleum products, have been investigated by gas chromatography-mass spectrometry(GC/MS). In the crude oils analyzed, two-rings compound(naphthalene) of PAHs was detected around $72.3\sim93.5%$, but five- or six-rings compound of PAHs was not detected. In the crude oils analyzed, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene)>15, Fla/Pyr(fluoranthene/pyrene)<1, BaA/Chr(benzo (a)anthracene/chrysene)$\leq0.4$ could be effectively applied, and we found that the origin of PAHs was petrogenic sources. Total PAHs concentrations in the crude oils were increased with increasing API gravity and with decreasing sulfur contents of the analyzed crude oils. Five- or six-rings compound of PAHs were not included in ail petroleum products except bunker-C. Furthermore, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene) vs. Fla/Pyr(fluoranthene/pyrene) could be effectively applied as the standard for the PAHs contamination criterion at the other Korean areas.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.827-835
• /
• 2001

In this study, condensation heat transfer characteristics were conducted with special heat transfer tubes of SH-C type. Experiments were carried out the saturated vapor temperature of 334K and the wall subcooling of 1.5-4.5K. The refrigerant was R-113 and the enhanced tubes used in the present study were SH-CDR, SH-CYR and SH-CHR. The experimental results showed that the condensation heat transfer coefficients of SH-C type tubes were about 23-66% higher than those of a low integral-fin tube. It was visualized that the condensed liquid on the outer surface of SH-C type tubes flowed continuously down unlike a low integral-fin tube and a plain tube, due to a 3-D extending fin on the outer surface of SH-C type tubes. As a result, the thermal resistance of the condensed liquid decreased and the heat transfer coefficient increased. Also, the enhancement ratio of SH-CDR tube was the highest, and it was about 9-11 times as compared to that of a plain tube.

• 천문학회보
• /
• 제39권2호
• /
• pp.110.1-110.1
• /
• 2014

The optics of Space telescope is one of the major parts of space mission used for imaging observation of astronomical targets and the Earth. These kinds of space mission have a bulky and complex opto-mechanics with a long optical tube, but there are attempts have been made to observe a target with a small satellite in many ways. In this paper, we describe an optical design of a reflecting telescope for use in a CubeSat mission. For this design, we adopt the off-axis segmented method of astronomical observation techniques based on the Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and a secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can obtain a $0.3{\times}0.2$ degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation. Based on this conceptual design, we will keep trying to study more for astronomical observation with Attitude control system.