• Membrane Journal
• /
• v.18 no.1
• /
• pp.44-52
• /
• 2008

Pervaporation separation for water-ethanol mixtures has been carried out using crosslinked poly(vinyl alcohol) (PVA) membranes with poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA) and at which tetraethylorthosilicate (TEOS) was introduced. The concentration of PSSA_MA was fixed 7 wt% over PVA and the TEOS contents, 3, 5, and 7 wt%, were varied against PVA. The composition of the feed mixtures were 10, 20, 30 and 50 wt% of water in it. PVA/PSSA_MA/5 wt% TEOS membrane showed the separation factor, 1730 and the permeability, $16.3g/m^2{\cdot}hr$ for water : ethanol = 10 : 90 at $50^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.274-284
• /
• 1994

Phase Inversion Temperature (PIT) measurements showed that the addition of polar components such as oleyl alcohol and oleic acid to the system comprising n-dodecylpentaoxyethylene monoether ($C_{12}E_5$), nonpolar oil (n-hexadecane) and water produced large reductions in the PIT. The PIT was lowered as the additive-to-surfactant ratio in the surfactant films in the microemulsion phase was increased. Another dramatic effect of additive was the manner in which it affects the volume of the microemulsion phase at the PIT of the oil and water solubilization characteristics. Microemulsion phase volume was increased rapidly with decreasing PIT, i.e., with increasing amounts of additive in the system. Also with a decrease in PIT, the solubilization parameters of both oil and water in the microemulsion phase were strikingly increased. Even though soil removal data were not available for the conditions where our results obtained, PIT measurement seems a useful starting point for estimating conditions when middle-phase microemulsion formation and its associated high solubilization of oil can be expected.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.1
• /
• pp.15-24
• /
• 2017

A comparative study was performed on the passivating abilities of surface films generated on lithium titanate (LTO; $Li_4Ti_5O_{12}$) electrodes during pre-cycling at two different rates. The surface film deposited at a faster pre-cycling rate (i.e., 0.5 C) is irregularly shaped and unevenly covers the LTO electrode. Owing to the incomplete coverage of the protective film, this LTO electrode exhibits poor passivating ability. Additional electrolyte decomposition and concomitant film deposition occur during subsequent charge/discharge cycles. As a result of the thick surface film, severe cell polarization occurs and eventually causes cell failure. However, pre-cycling the Li/LTO cell at a slower rate (0.1 C) improves cell polarization and capacity retention; this occurs because the surface film uniformly covers the LTO electrode and provides strong passivation. Accordingly, there is no significant film deposition during subsequent charge/discharge cycling. Additionally, self-discharge is reduced during high-temperature storage.

• BMB Reports
• /
• v.33 no.6
• /
• pp.493-498
• /
• 2000

Aquifex pyrophilus, a hyperthermophilic bacterium, has a serine-type protease that is located at the cell wall fraction with a mature size of 43 kDa. Molecular cloning of the protease gene revealed that it has an ORF of 619 amino acids with homologous catalytic site of serine-type proteases [Choi, I.-G., Bang, W.-K., Kim, S.-H., Yu, G. Y., J. Biol. Chem. (1999), Vol. 274, pp. 881-888]. Constructs containing different regions of the protease gene, including a alanine-substituted mutant at the active site serine, were constructed, and the factors affecting the expression level of the cloned protease gene in E. coli were examined. The presence of the C-terminus hydrophobic region of the protease hindered over-expression in E. coli. Also, the proteolytic activity of the expressed protein appeared to toxic to E. coli. An inactive form that deleted both of the N-terminal signal sequence and the C-terminal polar residues was over-expressed in a soluble form, purified to homogeneity, and its thermostability examined. The purified protein showed three disulfide bonds and three free sulfhydryl group. The thermal denaturation temperature of the protein was measured around $90^{\circ}C$ using a differential scanning calorimeter and circular dichroism spectrometry. The disulfide bonds were hardly reduced in the presence of reducing agents, suggesting that these disulfide bonds were located inside of the protein surface.

• Resources Recycling
• /
• v.5 no.1
• /
• pp.14-20
• /
• 1996

For recycl~ng alumhx~rn dross, the cbaraclcrislics of dross and ils reutll~zalin~af~te r plocsssing should he considered. Nurn~llumd ross was classified according to iB sire in this shldy. Tbe dross larger Illan 3001~1w as directly re-meltcd to recover aluminum, and the s~nallerd ~ossw as leachcd and riln~tedl o scparalc 111s eri~lerls alt and to oxidize the rnelals contained in the dross. As a rcwlt, amount of the dross uscd lo be dircarded ahcr processing could hc reduced Also, lhc chem~cal culnposit~ons of a domzstic alumlnum dross and the changes in con~posilii~ndsu ring processings were investigated. and Cound that most mctaU'ic aluminum in the dross was changed inlu alu~n~numox ide lhruugli the roasting. Tile processed dross would he ulillzed for malerials such as alumina, alumma cemenl or tilcs.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.412-417
• /
• 2007

In the present study, crosslinked poly(vinyl alcohol) (PVA) membranes were prepared at different temperatures using poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA) (PVA:PSSA_MA = 1:9). The hybrid mem-branes were prepared by varying the TEOS content between 5 and 30 wt%. The PSSA_MA was used both as a crosslinking agent and the hydrophilic group donor ($-SO_3H$ and/or-COOH). The proton conductivity increased with up to 20 wt% TEOS, but decreased above this level, although the water content decreased with increasing TEOS content. This result suggests that the silica doped into the membrane improved the formation of proton-conduction pathways due to the absorption of molecular water. The PVA/PSSA_MA/Silica containing TEOS 20% showed both high proton conductivity (0.026 S/cm at $90^{\circ}C$) and low methanol permeability ($5.55{\times}10^{-7}cm^2/s$).

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.84-94
• /
• 2018

Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure is estimated for tasks by preassigned ART1.5 activity classes and modifying factors. Results: CTES requires few inputs. The toxicological data, including OELs, OEBs, and vapor pressure are read from a database. Once the substance is selected, the user specifies its concentration and then chooses the task description and its duration. CTES has three outputs that may trigger follow-up: (1) inhalation risk score; (2) identification of the skin hazard with the skin warnings for local and systemic adverse effects; and (3) status for carcinogenic, mutagenic, or reprotoxic effects. Conclusion: The tool provides an effective way to rapidly screen low-concern tasks, and quickly identifies certain tasks involving substances that will need further review with, nevertheless, the appropriate conservatism. This tool shows that the higher-tier ART1.5 inhalation exposure assessment model can be included effectively in a screening tool. After 2 years of worldwide extensive use within the company, CTES is well perceived by the users, including the shop floor management, and it fulfills its target of screening tool.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 1996.06a
• /
• pp.33-33
• /
• 1996

Interests in the field of rapid methods and automation in microbiology have been growing steadily on an international scale in recent years. International meetings concerned this problem have been held in elsewhere in the world countries since the past twenty years. But, unfortunately in the field of microbial examination in food hygiene, this problem have not yet been developed so much as in the field of clinical microbiology. Today, I would like to introduce you here present aspects of rapid and automation technologies, those which are manly carrying in milk and meats industries. My illustration will be given recent improved technologies using automatic apparatus and instruments along with process of microbial count procedure. Recent direct microbiological counting system (ChemeScan \ulcorner) as real time ultrasensitive analysis created by Cheminex Ltd., France is now most evolutional instrument to provide direct microbial counts, down to one cell, within 30 minutes. The results from these evaluations how a good correlation between the ChemScan system and the standard plate count method. This system will be successful application for not only in the field of pharmacology but also food microbiology. In addition, current identification of microbes by sophisticated instruments suitable for food microbiology, one of which Biology is manual system (BIOLOG\ulcorner), provides reference-level capability at a modes price. For the manual system, the color reactions in the microplate are read by eye and manually keyed into personal computer. Species identification appears on the computer screen within seconds, along with biotype patterns, a list of closely related species, and other useful statistics. In present this is useful application for microbial ecology and epidemiological survey. RiboPrinter system newly produced by DuPont is now focusing among microbiologists in the world, and is one of the biggest microbial characterization system using a DNA-based approach. The technology analyzer is bacterial culture for its genetic fingerprint or riboprint pattern. Finally Bio-cellTracer system for automatic measurement of fungal growth and Fukitori-Maseter, a Surface Hygiene Monitoring Kit by using swabe procedure in food processing environment are briefly illustrated in this presentation.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.259-264
• /
• 2015

For the enhanced oil recovery, one of the most important factors is to determine the surfactant formulation in chemical flood. The objective of this study is to analyze the microemulsion formed between the alkali-surfactant (AS) solution and A crude oil for screening surfactants. The alkali-surfactant solution was manufactured by using the surfactant purchased from AK ChemTech. $C_{16}-PO_7-SO_4$ and sodium carbonate solution were used as surfactant and alkaline, respectively. Both TEGBE and IBA were used as a co-solvent. The AS solution and A crude oil can form a Type III middle phase microemulsion at the salinity from 0.0 wt%~3.6 wt%. Increasing the salinity causes the phase transition of microemulsion from the lower (Type I) to middle (Type III) to upper (Type II) phase. Interfacial tension (IFT) values calculated by Huh's equation were in good agreement with ultralow IFT. According to this characteristic, the surfactant purchased from a domestic company can be applied to the enhanced oil recovery.

• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.45-51
• /
• 2000

The binding mode of anthryl derivatives to synthetic polynucleotides were investigated by various spectroscopic methods. The spectroscopic properties of anthracence with metbylamine and methylethylenediamine side chains, complexed with $poly[d(A-T)_2]$ and $poly[d(G-C)_2]$, can be summarized as a red-shift, with a strong hypochromism in the absortion spectrum, similar induced CD spectra, and a strong negative LD spectrum with an $LD^r$ magnitude comparable to the DNA absorption region. These observations indicate that anthracene moiety is intercalated between the nucleo-bases of $poly[d(A-T)_2]$ and $poly[d(G-C)_2]$. The side chains did not alter the spectroscopic properties, demonstrating that the binding mode was not affected by them. A strong energy transfer was observed from poly[d(A-T),] and $poly[d(I-C)_2]$ but not from $poly[d(G-C)_2]$, as reported by Kumar et al. (J. Am. Chem. Soc.(1993) 115, 8547). Since the binding mode is the same for all the polynucleotides, the amine group of the guanine base, which protrudes into the minor groove of $poly[d(G-C)_2]$, is concluded to disrupt the energy transfer.