• 한국수산과학회지
• /
• 제15권1호
• /
• pp.1-25
• /
• 1982

우리나라 남서부에 위치한 대표적 인공호인 옥정호에서 1980년 5월부터 1981년 8월까지 16개월 동안 매월 호소의 이화학적 요인들과 동식물 Plankton의 계절적 변동과 수직적 변동, 그리고 어류상 등을 조사하여 종합적인 육수생물학식 연구를 시행하였다. 표층수의 수온은 8월에 최고 $28.2^{\circ}C$, 1월과 2월에 최저 $3.5^{\circ}C$였다. 저층인 수신 40m 깊이의 수온은 9월이 최고 $8.5^{\circ}C$, 2월에 최저 $3.5^{\circ}C$로서 그 차이는 $5^{\circ}C$였다. 수온 만화에 따른 수온 탁층의 분포 및 수직 안정도를 보면 11월부터 3월까지 저수온기에는 완전 수직혼합이 일어나며 2월에는 표층에서 저층까지 모두 $3.5^{\circ}C$였다. 4월부터 6월까지 표층수 수온의 상승으로 인하여 표층부터 l0m 수신의 층까지에 걸쳐 양층이 형성되며, l0m 이하의 저층수는 $5.6\sim7.1^{\circ}C$의 범위로 성층이 생겼다. 고수온의 표층은 점점 깊어져 $7\sim10$월에는 $15\sim25m$ 수신에 수온탁층이 형성되어 수직 혼합이 일어나는 표층과 안정된 저층으로 구분되었다. 8월의 표층수는 $28.2^{\circ}C$, 저층수온도 상당히 상승되어 9월에는 $8.5^{\circ}C$까지 상승하여 호수의 혼합이 의외로 큰 것을 알 수 있었다. pH의 년중변화는 표층에서 6.8(1월)$\sim$9.0(8월)의 범위이며, 중층에서는 $6.5\sim7.0$, 저층에서는 $6.0\sim7.5$ 였다. DO는 년중 보화상태였고, 저수온기인 겨울철에는 약간 과보화 상태였으며, 년중 각 DO의 약층은 나타나지 않아, 저층까지 DO양은 비교적 높았다. 투명도는 최고가 2월에 4.6m 였고, 최저가 8월에 1.7m 였으며 1980년 8월의 예비조사시에도 8월에 0.9m로 조사기간중 최하였다. 이렇게 낮은 투명도는 이 때 최대로 번모한 Anabaena spiroides, Melosira granulata 등 때문인 것으로 생각된다. 염소양, 지산태 지소, COD, 인산염의 분석결과는 1980년의 값에 비하여 1931년의 값이 다소 증가된 경향을 보인다. 또 칼슘, Mg, Fe와 같은 무기물질들의 분석결과로 보아 옥정호의 수질은 연수로 평가되었고 크룸이나 수은과 같은 중금속물질들도 극히 미양 검출되었다. 조사기관신 본 호에서 채집된 Plankton의 출현종은 모두 7과 72속 107종이었다. 그 중 Phytoplankton은 Cyanophyta가 12종, Bacillariophyta 19종, Chlorophyta 23종이었고, Zooplankton은 Protozoa14종, Rotifera 29종, Cladocera 4종, Copepoda 6종이었다. Phytoplankton의 생산은 $7\sim10$월의 대번식(Peak는 10월 $1,504\times10^3\;cells/l$)과 $1\sim4$월의 소번식(Peak2월 $236\times10^3\;cells/l$)의 2회의 Peak를 나타냈다. Phytoplankton의 종 조성 만화의 양상을 보면 Melosira granulata, Anabaena spiroides와 같이 고수온기인 $7\sim10$월에 번무하는 무리, Asterionella gracillima, Synedra acus, S. ulna와 같이 저수온기에 다양 출현하여 겨울철에 번무하는 무리, 그리고 Microcystis aeruginosa, Ankistrodesmus falcatus와 같이 소양씩 주년 출현하는 세 무리로 대별할 수 있다. Zooplankton의 종 조성 및 출현 양상을 보면 주요 종들은 Thermocyclops taihokuensis, Difflugia corona, Bosmina longirostris, Bosminopsis deitersi, Keratella quadrata, Asplanchna priodonta, A. herricki 등이며, 이들은 $10\sim11$월부터 익년 2월 혹은 4월까지의 저수온기에 출현이 없거나 있어도 매우 적었다. 수직 일견변동은 주로 Microcystis aeruginosa, M. incerta, Anabaena spiroides, Melosira granulata, Bosmina longirstris에 의하여 나타났다. 특히 M. granulata는 일몰과 더불어 저층으로 밀집하는 이동을 했으며 B. longirostris는 일몰과 더불어 표층으로 부상하고 일출과 더불어 전 수층에 확산되는 양상을 보였다. 본 호에서 채집된 어류는 10과 31속 41종이었다. 그 중 Pseudoperilampus uyekii와 Coreoleuciscus splendidus를 포함한 13종의 어류는 한국 특산종으로 우리나라의 다른 호소들에 비하여 어류상이 다양하였다.

• 농촌지도와개발
• /
• 제7권1호
• /
• pp.155-166
• /
• 2000

1994년 가을 한국을 방문하였을 때 놀란 것 온 도시 근교에 숲과 같이 세워진 고층 아파트 단지와 그 수요의 배경이 된 서울, 수원을 비롯한 수도권의 인구 집중이었다. 이러한 인구 집중을 가져온 것은 바로 제2차, 3차 산업의 발달이었다. 그 이후 6년만인 2000년 3월에 다시 농촌과 농촌지도사업의 변화 동향을 살펴보기 위하여 농가 방문, 도 농업기술원 및 시 ${\cdot}$ 군농업 기술센터를 방문하면서 더욱 진전된 아파트군과 도시 근교의 비닐 하우스 단지였으며, 이는 한국이 지속적인 경제 발전을 하고 있다는 한 증거였다. 한국은 1997년에 내습한 통화위기로 IMF의 구제 금융을 받게 되었고, 이로 인하여 한국 경제는 IMF의 관리하에 있었으나 1년만에 회복의 기미를 보이기 시작하였으며, 1999에는 GDP 성장률이 10.7%에 달하였다. 한국 정부는 이 시기에 구조개혁을 단행하여 금융, 기업, 노동, 공공의 각 부분에 개혁을 단행하였다. 특히 정부로서는 정부 조직을 개편하여 지방화, 행정 조직 인원의 삭감, 농업 예산의 축소하는 방향으로 나아갔고 공기업을 민영화하여 농업 단체의 통합, 각종 규제를 철폐하였다. 중앙 정부의 권력이 지방으로 많이 이양되어 시장, 군수 등의 권한이 크게 늘어났다. 농촌지도사업도 IMF 관리하의 정부 조직 개편 및 규제 완화의 대상이 되었다. 지금까지 중앙 정부 소속이었던 농촌지도 사업이 지방화의 영향으로 시 ${\cdot}$ 군으로 이관되었다. 이것에 동반하여 농촌지도소 수의 축소(64%), 지도 직원의 감원(24%), 사업 예산의 감소 등으로 나타났다. 이러한 개편 과정에서 농촌지도사업의 기본적인 방향을 정하는 것은 중앙의 농촌진흥청이 맡고 인사와 기술 개발, 지원은 도농업기술원, 사업운영 책임은 시 ${\cdot}$ 군에서 맡는 체제로 개편되었다. 시 ${\cdot}$ 군 단계의 농촌지도사업은 담당 기구가 농촌지도소에서 농업기술센터로 그 명칭이 변경되었고, 설치권자가 군수로 되었으며, 그 기능에 기술 개발 업무가 더해졌으며, 농촌지도사 및 생활지도사의 수가 크게 감소되었다. 최근에 한국의 농촌 및 농촌지도사업을 관찰한 결과, 이러한 중앙, 도 시 군의 지도 기능 분담이 그렇게 잘 인식되어 있는 것만은 아닌 면도 있는 것으로 보였다. 이러한 구조 개선을 계기로 해서 농촌의 현실을 반영한 실효성 있는 농촌진흥에 기여할 수 있는 농촌지도사업으로 재출발한다는 의의를 살릴 수 있도록 농촌진흥청은 농업기술센터의 동태를 철저하게 살피고 이와 관련한 도농업기술원의 대응을 파악하여 이를 기초로 기능을 발휘하도록 만들어야 할 것이다. 국가에서 이관된 현지의 농촌지도 거점인 농업기술센터에 관하여 농촌지도소가 개칭되어 농업기술센터가 되었고 조직적인 면에서도 기술개발과가 설치되었다. 이는 현지에서의 기술 개발이 가능하게 된 점과 현지에서 원하는 과제를 신속하게 대응하여 도와 국가의 시험연구 과제로 삼을 수 있게 된 것은 시험 연구 사업에서 크게 평가받을 만한 발전이라 할 것이다. 그러나, 농촌지도 직원이 다른 행정 업무도 겸무하여 될 경우 영농 환경을 좋게 하는 직접적인 행정에 관한 업무에서는 겸무하므로서 농가도 편리해지고, 보급지도의 효과도 촉진되는 경우가 있으나 검사, 취체 업무는 반드시 피해야 할 일이다. 동일인이 이것을 담당하게 되면 농가에게 안심감을 잃어버리고 보급 효과는 기대할 수 없게 될 것이다. 한국의 농촌지도사업의 보급 내용은 농업자재의 절약, 첨단농업기술의 개발, 이를 기반으로 수출농업의 촉진과 생산성 향상, 시장에 강한 농업의 구축 등에 힘을 쏟고 있는 것으로 보였다. 그러나 이러한 농업의 추구는 약탈농업을 추구하는 등 지속적 농업이 되지 않을 가능성이 높아지게 된다. 앞으로 지속적인 농업에 관하여 보다 더 많은 관심을 기울여야 할 것이다. 선진농가들은 기술이나 경영 혁신을 위하여 연구 개발을 위한 정보의 수집과 연구회의 필요성을 크게 강조하고 있었다. 그러나 이러한 선진 농가 이외에 소규모의 농업소득이 낮은 농가도 있었다. 이러한 농가에게는 농업경영에 대한 방향 설정과 추진 방법에 대한 적절한 상담 상대가 없는 것으로 보였다. 이러한 농가들에 대한 시의적절한 정보의 전달, 자력으로 기술과 경영 방책을 만들어내는 힘을 길러주는 지도가 필요하다. 이를 위한 방책으로 그룹의 육성과 가입 촉진이 유효할 것이다. 따라서 한국에 있어서 농촌지도 방법은 크게 두 가지 대상을 의식하여 대 선진농가의 경우에 는 상담 기능, 대 소규모 농가의 청우에는 전달 ${\cdot}$ 교육 기능의 발휘에 있을 것이다. 상담 기능은 정보의 제공과 과도하지 않은 방책을 선택 할 수 있도록 지도 조언하는 것이, 전달 ${\cdot}$ 교육 기능은 과제해결 과정을 체득하게 하는 것이다. 이를 위하여 인터넷의 활용 방법, e-메일에 의한 정보교환 시스템화 등의 연구가 진행되고 있다. 인원의 감소나 겸무화의 진행에 따라 이러한 업무의 수행이 쉬운 것은 아니라고 생각되고, 일 대 일의 지도는 어려울 것이나 집단 지도로는 가능한 측면도 있을 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 항공우주정책ㆍ법학회지
• /
• 제32권1호
• /
• pp.83-138
• /
• 2017

한 중 FTA가 2015년 12월 20일 발효되었고, 우리나라 제1위의 교역상대국인 중국과의 FTA로서 발효된 후 1년이 경과하였다. 따라서 본 연구에서는 한국과 중국 간 항공운송 교역 동향을 살펴보고, 한 중 FTA의 항공운송서비스 부문에 대한 양허내용을 검토하고, 항공운송 부문에 미치는 영향을 분석하며, 이에 대응하기 위한 우리나라 항공정책의 방향을 도출하여 제시하고자 한다. 2016년 한 중 간 항공운송 교역 동향을 살펴보면, 대중국 항공운송 수출액은 전년대비 9.3% 감소한 400.3억 달러로서, 대중국 전체 수출액의 32.2%를 차지하고 있다. 대중국 항공운송 수입액은 전년대비 9.1% 감소한 242.6억 달러로서, 대중국 전체 수입액의 27.7%를 차지하고 있다. 한 중 FTA의 항공운송서비스 부문 양허내용을 검토해 보면, 중국은 한 중 FTA 협정문 제8장 부속서 중국의 양허표에서 항공운송서비스 분야의 항공기 보수 및 유지 서비스, 컴퓨터 예약시스템(CRS)서비스에 대하여 시장접근과 내국민대우에 대한 제한을 두고 양허하였다. 한국은 한 중 FTA 협정문 제8장 부속서 한국의 양허표에서 항공운송서비스 분야의 컴퓨터 예약시스템서비스, 항공운송서비스의 판매 및 마케팅, 항공기 유지 및 보수 서비스에 대하여 시장접근과 내국민대우에 대한 제한을 두지 않고 양허하였다. 한 중 FTA가 항공운송 부문에 미치는 영향을 분석해 보면, 항공여객시장에 미친 영향으로, 2016년 국제선 중국노선 도착여객은 996만 명으로 전년대비 20.6% 증가하였고, 출발여객은 990만 명으로 전년대비 34.8% 증가하였다. 항공화물시장에 미친 영향으로, 2016년 대중국 항공화물 수출물동량은 105,220.2톤으로 전년대비 6.6% 증가하였고, 수입물동량은 133,750.9톤으로 전년대비 12.3% 증가하였다. 대중국 수출 항공화물 주요품목가운데 한 중 FTA 협정문 중국 관세양허표 상 수혜품목의 수출물동량이 증가하였고, 대중국 수입항공화물 주요품목가운데 한 중 FTA 한국 관세양허표 상 수혜품목의 수입물 동량이 증가하였다. 항공물류시장에 미친 영향으로 2016년 국내 포워더의 대중국 수출 항공화물 취급실적은 119,618톤으로 전년대비 2.1% 감소하였고, 대중국 수입 항공화물 취급실적은 79,430톤으로 전년대비 4.4% 감소하였다. 2016년 대중국 역직구(전자상거래 수출) 수출금액은 1억 916만 달러로 전년대비 27.7% 증가하였고, 대중국직구(전자상거래 수입) 수입금액은 8,943만 달러로 전년대비 72% 증가하였다. 한 중 FTA에 따른 우리나라 항공정책의 방향을 도출하여 제시해 보면 다음과 같다. 첫째 한 중 간에 항공자유화를 추진한다. 한국과 중국은 2006년 6월 중국의 산동성과 해남성에 대해 여객 및 화물 제3자유 및 제4자유를 범위로 하는 항공자유화 협정을 체결하였으며, 2010년 하계부터 양국 간 항공운항을 전면 자유화하기로 합의하였으나, 중국 측에서 항공협정 양해각서 문안의 해석 상 이의를 제기함에 따라 추가적인 항공자유화는 이루어지지 못하고 있다. 한 중 FTA와는 별도의 항공회담을 통해 중국과의 점진적 선별적 항공여객시장 및 화물시장의 항공자유화를 추진해야 할 것이다. 둘째 항공운송산업 및 공항의 경쟁력을 확보해야 한다. 한국의 항공운송산업 경쟁력의 강화방안으로 국적항공사 경쟁력의 강화를 위한 지원체계를 마련하며, 국적항공사의 새로운 공정경쟁의 기반을 조성하며, 국익기반 전략적 네트워크를 구축해야 할 것이다. 한국의 공항 특히 인천공항의 경쟁력 강화방안으로 항공수요 창출 네트워크 경쟁력을 강화하며, 공항시설과 안전인프라를 확충하며, 공항을 통한 새로운 부가가치를 창출하며, 세계 1위 수준의 서비스 수준을 유지해야 할 것이다. 셋째 항공물류업의 경쟁력을 강화한다. 한국의 항공물류업 경쟁력의 강화방안으로 산업트렌드 변화에 대응한 고부가가치 물류산업의 육성전략으로 신규 물류시장을 개척하며, 물류인프라를 확충하며, 물류전문인력을 양성한다. 또한 글로벌 물류시장의 확대전략으로 물류기업의 해외투자 지원체계를 구축하며, 글로벌 운송네트워크 확장에 따른 국제협력 강화 및 인프라를 확보해야 할 것이다. 인천공항 항공물류 경쟁력의 강화방안으로 기업의 물류단지 입주수요에 대응하며, 신 성장 화물분야의 비교우위 선점을 하며, 물류허브 역량을 강화하며, 공항 내 화물처리속도 경쟁력을 향상해야 할 것이다. 넷째 한 중 FTA 후속 협상에서 항공운송서비스 분야의 추가 개방을 확보한다. 한 중 FTA 발효 후 2년 내에 개시될 후속 협상에서 중국 측 항공운송서비스 분야의 양허수준이 중국의 기체결 FTA에 비해 미흡한 분야인 컴퓨터 예약시스템서비스 및 항공기 보수 및 유지 서비스의 양허에 대해 추가 개방을 요구하는 것이 필요할 것이다. 결론적으로 한 중 FTA가 우리나라 항공여객시장, 항공화물시장 및 항공물류시장에 미치는 영향에 대응하여 추진해야 할 정책과제로서, 국적항공사의 경쟁력과 국민 편익을 고려하여 중국과의 점진적 선별적 항공자유화를 추진하며, 항공운송산업과 공항의 경쟁력 강화를 위한 지원체계를 구축하며, 물류기업들의 항공물류시장 진출을 확대하며, 중국 측 양허수준이 낮은 항공운송서비스 분야의 추가 개방 요구를 위한 준비를 해야 할 것이다.

• Applied Biological Chemistry
• /
• 제10권
• /
• pp.69-100
• /
• 1968

1 : 탁주양조(濁酒釀造)에 가장 큰 미생물원(微生物源)이 되는 누룩중(中)의 미생물군(微生物群)과 효소(酵素)를 조사하기 위(爲)하여 충남대학교(忠南大學校) 농과대학(農科大學)에서 제조(製造)한 누룩(S)와 시판(市販) 누룩(T)을 공시(供試)하여 사상균(絲狀菌), 호기성세균(好氣性細菌), 유산균(乳酸菌) 및 효모(酵母)를 검색(檢索) 계수(計數)하고 특(特)히 효모(酵母)는 TTC-agar 처리(處理)로서 그 정색별(呈色別)에 따라 유별(類別)하였으며 또한 Amylase 및 Protease 역가(力價)를 측정(測定)하여 얻은 결과(結果)는 다음과 같다. (a) S 누룩 1gm. 중(中)에는 Aspergilles eryzae group: $240{\times}10^5$, Black aspergilli: $163{\times}10^5$, Rhizopus: $20{\times}10^5$, Penicillia: $134{\times}10^5$, 호기성(好氣性) 세균(細菌): $9{\times}10^6{\sim}2{\times}10^7$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였으며 T 누룩 1gm.중(中)에는 Aspergilles oryzae group: $836{\times}10^5$, Black aspergilli: $268{\times}10^5$, Rhizopus: $623{\times}10^5$, Penicillia: $264{\times}10^5$, 호기성(好氣性) 세균(細菌): $5{\times}10^6{\sim}9{\times}10^6$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였다. (b) S 누룩중(中) 호기성세균(好氣性細菌)은 $80{\sim}90%$가 Bacillus subtilis 계(系)인것 같았으며 T 누룩의 것은 70%내외(內外)가 구균(球菌)이었고 유산균(乳酸菌)은 양(兩)누룩이 다 약(約) 80%가 구상유산균(球狀乳酸菌)이였다. (c) S 누룩 1gm.중(中)의 효모(酵母)는 약(約) $6{\times}10^4$개(個)로서 이 중(中) TTC Pink 효모(酵母)가 56.5%, Red pink 효모(酵母): 16%, Red 효모(酵母): 8%, White 효모(酵母): 19.5%이었으며 T 누룩 1gm.중(中)의 효모(酵母)는 약(約) 개(個)로서 이 중(中) Pink: 42%, Red Pink: 21%, Red: 28%, White: 9%이였다. (d) S 누룩 1gm.중(中)의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 43.32 A.U., Acid protease 181 C.F.U., Alkaline pretease: 240 C.F.U.이였으며 T 누룩 1gm.의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 34.92 A.U., Acid protease 138 C.F.U., Alkaline pretease: 31 C.F.U.이였다. 2 : S, T 누룩으로서 탁주(濁酒)를 담금하여 전양조(全釀造) 기간중(期間中) 매(每) 12시간(時間)의 미생물군(微生物群) 및 효소력(酵素力)의 소장(消長)을 측정(測定)하고 주효모(主酵母)라고 인정(認定)한 Pink와 Red 효모(酵母)를 분리배양(分離培養)하여 유산첨가(乳酸添加)로 pH를 4.2로 조절(調節)한 S, T 각구(各區)술덧에 $1{\times}10^6ml$개(個)를 첨가(添加) 양조(釀造)한 각(各)술덧중(中)의 미생물군(微生物群)의 소장(消長)을 측정(測定)하여 얻은 결과(結果)는 다음과 같으며 이 실험에서도 효모(酵母)는 TTC 정색별(呈色別)로 유별(類別) 계수(計數)하였다. (a) 각시료구(各試料區)에서 사상균(絲狀菌)은 담금후(後) $2{\sim}3$일경(日頃)부터 검출(檢出)되지 않았으며 호기성(好氣性) 세균(細菌)은 담금 직후(直後) 술덧 매(每) ml 당(當) S 누룩 사용(使用)의 3구(區)에서 $15{\times}10^7{\sim}35{\times}10^7$개(個), T 누룩 사용(使用)의 3 구(區)에서 $8.2{\times}10^7{\sim}12{\times}10^7$개(個)가 검출(檢出)되어 이중(中) 구균(球菌)은 유산(乳酸) 무첨가(無添加)로 담금한 S 및 T구(區)에서는 36시간경(時間頃)까지 많은 증식(增殖)을 하다가 기후(其後) 급속(急速)히 감소(減少)되고 유산(乳酸) 첨가(添加)로 담금한 SP, SR, TP, 및 TR 구(區)에서는 처음부터 거의 검출(檢出)되지 않고 Bacillus는 각구(各區)에서 다 같이 많은 기복(起伏)이 있는 소장(消長)을 하였으나 말기(末期)에는 초기(初期)의 약(約) $1/5{\sim}1/10$ 수(數)로 감소(減少)되었다. (b) 유산균(乳酸菌)은 담금후(後) 24시간경(時間頃)에 S 구(區)에서는 술덧 매(每) ml 당(當) 약(約) $7.4{\times}10^7$ 개(個)가 검출(檢出)되어 $3{\sim}4$일경(日頃)까지 약(約) $2{\times}10^8$ 개(個)로 증식(增殖)하고 그후(後) 급속(急速)히 감소(減少)되어 말경(末頃)에는 약(約) $4{\times}10^5$ 개(個)가 존재(存在)하였으며 T 구(區)에서는 24시간경(時間頃)에 검출(檢出)되었으며 3일경(日頃)에는 약(約) $3{\times}10^7$ 개(個), 말경(末頃)에는 약(約) $2{\times}10^5$ 개(個)가 존재(存在)하였다. 한편 SP, SR, TP, 및 TR 구(區)에서는 각구(各區)마다 24시간경(時間頃)에 약(約) $4{\times}10^5$ 개(個)로 현저(顯著)히 적은 수(數)가 검출(檢出)되었으며 기후(其後) 별(別) 변동(變動)없는 소장(消長)을 하거나 사멸(死滅)되어 거의 검출(檢出)되지 않았다. (c) 각구(各區)술덧에서 검출(檢出)된 유산균(乳酸菌)은 대부분(大部分) 구상균(球狀菌)이였으며 또한 유산균(乳酸菌)의 소장(消長)은 술덧중(中)에 생성(生成)되는 유산(乳酸) 및 Alcohol 함량(含量)과 부합(符合)되는 경향(傾向)이였다. (d) 효모(酵母)는 24시간경(時間頃)부터 증식(增殖)이 뚜렷하여 술덧 매(每) ml당(當) S 구(區)에서는 약(約) $2{\times}10^8$ 개(個)가 되고 48시간경(時間頃)에는 약(約) $4{\times}10^8$ 개(個)가 되어 계속(繼續)하다가 후기(後期)에 다시 증가(增加)되어 $5{\sim}7{\times}10^8$ 개(個)가 되었으며 T 구(區)에서는 24시간경(時間頃)에 $4{\times}10^8$ 개(個)가 되었고 기후(其後) 기복(起伏)을 보이면서 $2{\sim}5{\times}10^8$ 개(個)로 계속(繼續)하였다. (e) S, T 양구(兩區)술덧중(中)에서 소장(消長)한 효모(酵母)는 TTC Pink 효모(酵母)가 90%이상(以上)을 차지하고 Red pink 및 Red 효모(酵母)는 전양조기간(全釀造期間)을 통(通)하여 $2{\times}10^6{\sim}3{\times}10^7$ 개(個) 사이에서 소장(消長)하였다. (f) SP 에서는 효모(酵母)는 24시간경(時間頃)에 S 구(區)보다 2배(倍)가 되는 약(約) $5{\times}10^8$ 개(個)의 Pink 효모(酵母)가 검출(檢出)되었으며 중기말경(中期末頃)까지는 S 구(區)보다 많은 수(數)이였으나 후기(後期)에는 별차(別差)없는 수(數)가 되었다. (g) SR 구(區)에서 소장(消長)하는 총효모수(總酵母數)는 SP 구(區)와 대차(大差)는 없었으나, 첨가(添加)해준 Red 효모(酵母)는 초기(初期)에 다소(多少) 많이 검출(檢出)되고 3일후(日後)부터는 S 구(區)와 별차(別差)없는 수(數)로 소장(消長)하였으며 TR구(區)에서도 Red 효모(酵母)가 초기(初期)에는 T 구(區)에 비(比)해서 많았으나 중기이후(中期以後)부터는 T 구(區)와 별차(別差)없는 경향(傾向)이어서 Red 효모(酵母)를 가(加)한 구(區)에서도 Pink 효모(酵母)가 훨씬 우세(優勢)함을 보여 본실험(本實驗)에서 검출(檢出)된 Red 효모(酵母)는 탁주양조(濁酒釀造)에서 후기(後期)까지 계속(繼續) 생육(生育)은 하나 많은 증식(增殖)은 하지 않았다. (h) TP 구(區)에서 Pink 효모(酵母)는 2일경(日頃)에 약(約) $5{\times}10^8$ 개(個)가 되어 T 구(區)에 비(比)해서 많고 기후(其後) 감소(減少)되는 경향(傾向)이나 T 구(區)보다는 많으며 후기(後期)에서는 역시(亦是) T 구(區)와 별차(別差)없는 수(數)가 되었다. (i) 술덧중(中)의 효모(酵母) 소장(消長)과 동시(同時)에 Alcohol 생성량(生成量)을 측정(測定)한 결과(結果) Pink 효모(酵母)를 첨가(添加)한 구(區)에서 초기(初期)에 다소(多少) 많은 생성량(生成量)을 보였으나 중기(中期) 이후(以後)는 효모(酵母) 무첨가구(無添加區)와의 차이(差異)를 인정(認定)할 수 없었고 또 Alcohol생성(生成)은 효모(酵母) 총수(總數)와 비례(比例)하지 않았다. (j) 액화형(液化型) Amylase는 담금 후(後) 12시간경(時間頃)까지 가장 강(强)하고 24시간경(時間頃)에 일단(一旦) 감소(減少)되었다가 시간경(時間頃)에 최고(最高)로 증가(增加)된 후(後) 74시간경(時間頃)까지 서서(徐徐)히 감소(減少)되고 기후(其後)는 급(急)히 감소(減少)를 보였다. (k) 술덧발효중(醱酵中) Alkaline protease는 불규칙적(不規則的)이기는 하나 계속(繼續) 감소(減少)되는 소장(消長)이었고 Acid protease는 24시간경(時間頃)에 최고(最高)로 증가(增加)하였다가 급(急)히 감소(減少)된 후(後) 다시 증가(增加)하는 불규칙적(不規則的)인 소장(消長)을 보였으나 Alkaline protease 보다는 계속(繼續) 강(强)하였었다. 3 : 본실험(本實驗)에서 가장 많이 검출(檢出)된 TTC Pink 효모(酵母)와 계속(繼續) 나타난 2주(株)의 Red Pink 효모(酵母) 및 1주(株)의 를 동정(同定)하고 이들의 생리적성질(生理的性質)을 검사(檢査)한 결과(結果)는 다음과 같다. (a) TTC Pink 효모(酵母)(B-50P)와 2주(株)의 Red Pink 효모(酵母)(B-54RP 및 B-60RP)는 Saccharomyces cerevisiae 형(型)이였고 Red 효모(酵母)(B-53P)는 Hansenula subpelliculosa 형(型)이였다. (b) 분리동정(分離同定)한 발효력(醱酵力)을 측정(測定)한 결과(結果) 2주(株)의 TTC Red Pink 효모(酵母)가 가장 강(强)하고 Pink 효모(酵母)가 다소(多少) 떨어지며 Red효모(酵母)는 현저(顯著)히 약(弱)함을 보였고 특(特)히 Pink 및 2주(株)의 Red Pink 효모(酵母)는 초발효력(初醱酵力)이 강(强)하여 탁주양조(濁酒釀造)에 적합(適合)함을 알았으며 Red효모(酵母)는 발효력(醱酵力)은 약(弱)하나 Ester생성력(生成力)이 강(强)하여 탁주양조(濁酒釀造)에 중요(重要)한 역할(役割)를 하는것을 알았다. 따라 탁주양조(濁酒釀造)에는 TTC Red Pink 및 Pink로 정색(呈色)되는 Saccharomyces cerevisiae 형(型)이 우량(優良)함을 추정(推定) 할 수 있었다. (c) 분리동정(分離同定)한 4주(株)효모(酵母) 아초산내성(亞硝酸耐性)은 강(强)하였으며 유산내성(乳酸耐性)은 국즙(麴汁) 배지(培地)에서 3%정도(程度)이었으나 Red효모(酵母)는 더 강(强)하였고 Alcohol 내성(耐性)은 Hayduck배지(培地)에서 Pink 및 Red Pink 효모(酵母)는 3%정도(程度)이고 맥아즙(麥芽汁) 배지(培地)에서는 13%정도(程度)이었으나 Red 효모(酵母)는 이들보다 훨씬 약(弱)하였으며 Gelatin 액화(液化)는 2주(株)가 다 40일(日)까지 (-)이였다. 4 : 탁주양조중(濁酒釀造中)의 발효도(醱酵度)는 2일경(日頃)에 총발효율(總醱酵率)의 $70{\sim}80%$가 이루어지고 $3{\sim}4$일경(日頃)까지 90%내외(內外)가 진행(進行)되어 주발효(主醱酵)는 이 시기(時期)에 종료(終了)됨을 보였으며 또한 탁주양조(濁酒釀造)에 있어서 담금한 총전분량(總澱粉量)에 대(對)한 주정(酒精) 발효율(醱酵率)은 65%내외(內外)가 됨을 알 수 있었다. 5 : 제등(齊藤)가 탁주(濁酒)술덧에서 분리(分離)한 Saccharomyces coreanus가 본실험(本實驗)에서 전연(全然) 검출(檢出)되지 않은 이유(理由)는 1930년경(年頃)부터 누룩제조(製造)에 국균(麴菌)을 종균(種菌)으로 접종(接種)하였으며 또한 탁주양조(濁酒釀造)에 일본국(日本麴)도 혼합사용(混合使用)하여서 탁주양조(濁酒釀造)에 있어서 미생물상(微生物相)이 완전(完全)히 달라진 탓이 아닌가 생각되며 이것을 뒷받침 하는 것으로 과거의 약탁주(藥濁酒) 고유미(固有味)가 달라진 것을 들 수 있다.