• Coupled systems mechanics
• /
• v.5 no.4
• /
• pp.305-314
• /
• 2016

We utilize first-principles calculations within density-functional theory to investigate the possibility of strain engineering in the tuning of the band structure of two-dimensional $MoS_2$. We find that the band structure of $MoS_2$ monolayers transits from direct to indirect when mechanical strain is applied. In addition, we discuss the change in the band gap energy and the critical stains for the direct-to-indirect transition under various strains such as uniaxial, biaxial, and pure shear. Biaxial strain causes a larger change, and the pure shear stain causes a small change in the electronic band structure of the $MoS_2$ monolayer. We observe that the change in the interaction between molecular orbitals due to the mechanical strain alters the band gap type and energy.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.587-594
• /
• 2009

In this paper the change point problem of the error terms in linear regression models is considered. Since fixed or stochastic independent variables and weakly dependent errors are assumed, usual multiple regression models and time series models including ARMA are covered. We use the estimates of probability density function based on residuals in order to test the distribution change of the unobserved errors. Under some mild conditions, the test using the residuals is proved to have the same limiting distribution as the test based on true errors.

• Journal of Surface Science and Engineering
• /
• v.24 no.2
• /
• pp.88-95
• /
• 1991

The tin-lead alloy was electrodeposited in the low range of peak current density in order to investigate the change of composition and microstructure of them. The Pb content of alloy deposits, which was decreased with increasing average current density, was relatively lower than that of D.C. plated alloy deposit. The preferred orientation of alloy deposit was changed with increasing peak current density and the surface morphology of alloy deposits was closely related to the preferred orientation of them.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.221-224
• /
• 2002

Recently, simulation of Chemical Mechanical Polis hing is becoming more important because Process parameters on the material removal rate are complicated. And pattern-depent effects are a key concern in CMP processes. In this paper, we have been studied the changes of pattern density vs. oxide thickness with Stine's simulation model. We also have estimated the effective density using optimal window size with density mask, and have made a study of the change of oxide thickness as a function of polishing time.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.147-153
• /
• 2023

In recent times, an absence of effective crowd management has led to numerous stampede incidents in crowded places. A crucial component for enhancing on-site crowd management effectiveness is the utilization of crowd counting technology. Current approaches to analyzing congested scenes have evolved beyond simple crowd counting, which outputs the number of people in the targeted image to a density map. This development aligns with the demands of real-life applications, as the same number of people can exhibit vastly different crowd distributions. Therefore, solely counting the number of crowds is no longer sufficient. CSRNet stands out as one representative method within this advanced category of approaches. In this paper, we propose a crowd counting network which is adaptive to the change in the density of people in the scene, addressing the performance degradation issue observed in the existing CSRNet(Congested Scene Recognition Network) when there are changes in density. To overcome the weakness of the CSRNet, we introduce a system that takes input from the image's information and adjusts the output of CSRNet based on the features extracted from the image. This aims to improve the algorithm's adaptability to changes in density, supplementing the shortcomings identified in the original CSRNet.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.284-289
• /
• 2005

Changes of crosslink densities of resole-cured NR composites by thermal aging were studied. The thermal aging was performed at $50-90^{\circ}C$. The crosslink density change increased with increase of the aging temperature and then decreased. Level of the crosslink density change decreased with increase of the resole content. Increase of the crosslink density by the thermal aging was explained with the formations of new crosslinks by combination reactions of pendent groups terminated by resoles and crosslinking reactions by pendent groups having methylol or o-methylene quinone intermediate. And decrease of the crosslink density by the thermal aging was explained with the dissociations of the existing crosslinks having dimethylene ether linkages.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.209-213
• /
• 2005

The effects of density change of ambient gas on mixture formation process have been investigated in high temperature and pressure field. To analyze the mixture formation process of evaporating diesel spray is important for emissions reduction in actual engines. Ambient gas density was selected as experimental parameter. The ambient gas density was changed from $r_a=5.0kg/m^3\;to\;r_a=12.3kg/m^3$ with a high pressure injection system(ECD-U2). For visualization of the experiment phenomenon, a CVC(Constant Volume Chamber) was used in this study. The ambient temperature and injection pressure are kept as 700K and 72MPa, respectively. The images of liquid and vapor phase in the evaporating free spray were simultaneously taken by exciplex fluorescence method. As experimental results, with increasing ambient gas density, the tip penetration of the evaporating free spray decreases due to the increase in the drag force from ambient gas.

• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.37-44
• /
• 1998

The purpose of this study was to elucidate the effect of weight loss of polyethylene terephthalate(PET) fabrics on the mechanical properties such as bending and shear. In order to compare the effect of treatment machine on the mechanical properies of treated PET fabrics, PET fabrics were hydrolyzed with NaOH aqueous solution using Tank machine and Liquor flow machine, respectively. The results were as follows ： 1. The bending rigidity and shear stiffness of hydrolyzed PET fabric decreased markedly up to about 10％ weight loss regardless of treatment machines. At the above 10％ weight loss, the variation of these properties is nearly unchanged. In addition, the bending hysteresis and shear hysteresis also showed similar trend. 2. Weft density change of PET fabrics treated with Liquor flow machine decreased by 1pick/inch. It is assumed that this is attributed to the tension during the treatment of Liquor flow machine. On the other hand, the weft density change of PET fabrics treated with Tank machine is scarcely influeneced by the weight loss. While warp density of PET fabrics treated with Liquor flow machine had no change with weight loss, warp density of PET fabrics treated with Tank machine decreased by 6pick/inch due to the tension. 3. The bending rigidity and shear stiffness of PET fabrics hydrolyzed with liquor flow machine slightly higher than with Tank m/c at the above 10％ weight loss. It is assumed that this is caused by the increasement of the crossing pressure of warp and weft yarn and contact points of filaments in the yarns. Also, the bending and shear hysteresis of PET fabrics treated with Tank machine were higher than that of liquor flow machine.

• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.127-137
• /
• 2022

Recently, various clothing items are being developed using 3D printing technology, but comfort has become an issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity of the devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36℃, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.578-586
• /
• 2019

The purpose of this study was to investigate the change of spatial distribution of Korean red pine (Pinus densiflora Siebold & Zucc.) in Hallasan National Park by surveying the distribution and crown density and analyzing by the elevation, slope, orientation, and regional habitat in 2006 and 2015. The total area of the Korean red pine forest was 1,259.9 ha in 2015, which increased by 51.4 ha, or 4.1%, compared to 1,208.5 ha in 2006. For the past 10 years, the area of sparse density with crown density of 11% to 40% of Korean red pine increased by 59.8 ha, the area of moderate density with crown density of 41% to 70% increased by 59.0 ha, and the area of dense density with 71% or more crown density increased by 67.3 ha. In terms of the altitude above sea level, the Korean red pine forest area between 1,010 m and 1,400 m was the largest at 1,003.0 ha or 79.6% of the total area in 2015. The area between 1,100 m and 1,300 m increased, and the area of dense density decreased significantly while the areas of moderate density and sparse density increase. There was no notable change according to the land slope, and the area increased from 2006 regardless of the slope. By direction, 56.4% were distributed in the southwest and southeast directions centered on the south-facing slope with the increase of 27.8 ha over the 10 years while the northwest and northeast directions centered on the north-facing slope decreased by 7.6 ha. Regarding the distribution change of the Korean red pine forest by the region, the Yeongsil area showed an increase of 25.5 ha, or 49.6% of the total area increase, in 2006 while the Ibseog-oreum area including the right side on the Sanbeoleum mountain valley increased by 20.4 ha. The distribution in the Gaemideung area that includes Jogeundeule increased by 7.4 ha while that of Sogbat in Sungpanak Trail decreased by 1.9 ha. This study analyzed the changes in the distribution area and crown density of the Korean red pine forest according to the altitude, slope, direction, and regional habitat in Hallasan National Park. The expansion of Korean red pine forest distribution was limited to the areas where the grass and the shrub was the dominating vegetation structure, or the forest gap was created by the disturbance. On the other hand, the distribution area of the Korean red pine forest surrounded by deciduous broad-leaved forests or mixed vegetation structure is considered to result from the change in density more than the area due to competition with deciduous broad-leaved trees.