• 한국환경과학회지
• /
• 제27권9호
• /
• pp.797-802
• /
• 2018

Information about the density of fish eggs is important to understand the vertical distribution of eggs and survival in early stage, in particular change in egg density is one of major issue in fisheries. This paper describes a practical application of an experimental system for measurement of the fish egg density under laboratory conditions. The device can control the temperature range in each water column, and make different densities at each layer. The density of olive flounder (Paralichthys olivaceus) eggs have ranged from 1,018.49 to $1,020.93kg/m^3$ and were aggregated around the density of $1,020kg/m^3$. The results show that the device is applicable for measuring the fish egg density under laboratory conditions.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.60-67
• /
• 2011

본 연구에서는 고밀도 우드세라믹을 제조하기 위한 기초 연구로서 수지함침율 및 탄화온도에 따라 제조된 1차 탄화 우드세라믹을 수지 재 함침 후 2차 탄화하여 우드세라믹을 제조하고 밀도경사를 조사하였다. 2차 탄화 후 최소, 평균 및 최고밀도가 1차 탄화 우드세라믹보다 증가하였고, 밀도경사 비율도 증가하였다. 따라서 고밀도와 밀도경사 비율이 작은 균질한 우드세라믹을 제조하기 위해서는 2차 함침과 2차 탄화에 의한 우드세라믹 제조방법도 효과가 있는 것으로 나타났다.

• 자원리싸이클링
• /
• 제26권2호
• /
• pp.66-70
• /
• 2017

본 연구에서는 바다모래 세척 시 밀도 변화를 평가하기 위하여 채취와 판매되는 현장조건의 바다모래에 대하여 함수비, 진밀도, 들밀도 그리고 모래 운반차량 직접 계근을 통한 밀도 분석을 수행하였다. 바지선과 덤프의 진밀도는 각각 평균 $2.666g/cm^3$ 및 $2.651g/cm^3$로 전체적으로 거의 유사하였다. 또한, 바지선과 덤프의 습윤밀도는 각각 평균 $1.716g/cm^3$ 및 $1.331g/cm^3$로 나타남으로써, 모래 1톤이 차지하는 부피로 환산할 경우 각각 $0.583m^3$ 및 $0.751m^3$로 평균 약 28.8% 정도의 부피변화가 수반되는 것으로 나타났다. 또한, 모래 운반차량을 직접 계근하여 측정된 출하 모래와 바지선 모래의 밀도는 각각 평균 $1.398g/cm^3$ 및 $1.716g/cm^3$로 분석되었는데, 이 값을 모래 1톤이 차지하는 부피로 환산하면 각각 $0.715m^3$ 및 $0.583m^3$로 바다모래 채취량과 판매량 간에 평균 약 22.6% 정도의 부피 변화가 수반되었음을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB (Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC (Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE > LLDPE ≒ MDPE > LDPE and WVT ratio was HDPE < LLDPE < MDPE < LLDPE ≒ LDPE${\ll}$PVC. WVT of PVC using for jacket showed characteristic 15 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials

• 한국균학회지
• /
• 제22권4호
• /
• pp.394-409
• /
• 1994

간척년도가 다른 두 간척지의 고등식물 근권에 존재하는 arbuscular mycorrhizal fungi(AMF)의 포자밀도, 공생강도 및 소포밀도, 그리고 숙주식물인 산조풀, 띠, 비쑥, 갯개미취 및 사데풀의 식물량과 그외의 요소인, 토양의 전기전도도와 Zn 함량 및 식물체속 아연의 함량 등을 조사하여 AMF의 생물학적 특성과 식물의 아연 흡수에 미치는 AMF 공생활성의 영향 등을 연구하였다. 간척지 식물을 토양의 염분함량에 따라 분류하면 염생식물, 임의염생식물, 중성식물의 순으로 AMF 공생활성이 높았고 생활형으로 분류하면 1, 2, 다년 생식물로 감에 따라 AMF 공생활성이 높았다. AMF 공생활성의 계절 변화는 포자밀도가 고등식물의 생육말기부터 봄까지 커짐으로써 가을에 번식함은 알았고, 공생률은 봄, 여름에 높았고 가을에 낮았다. AMF의 공생활성인 포자밀도와 공생강도 사이는 높은 양의 상관이 나타났지만 소포밀도와 포자밀도 또는 소포밀도와 공생강도 사이에는 상관이 없었다. 식물량과 AMF 포자밀도 또는 공생강도 사이에는 높은 양의 상관이 나타났고, 식물량과 소포밀도 사이에는 뚜렷한 상관이 없었다. 이 결과로 간척지의 식물량은 AMF 공생에 의하여 증가되고 포자밀도와 공생강도가 AMF 공생활성의 중요한 척도임을 알았다. 아연 흡수는 AMF 공생활성이 높은 식물이 낮은 식물에 비하여 보다 많은 양을 흡수하였다.

• The Korean Journal of Physiology
• /
• 제2권1호
• /
• pp.31-38
• /
• 1968

Total body fat measurement by means of skinfold thickness was performed in 94 secondary school boys. Hydrostatic weighing was made on the same subject and corrected for residual volume in lung. Skinfold thicknesses at four sites, namely, back, waist, arm and abdomen, were compared with total body fat calculated from the equation given by Keys and Brozek and regression equation were computated. In 48 middle school boys aged between 13 and 16 years and 46 high school boys aged between 16 and 19 years, skinfold thicknesses increased at all 4 sites as age increased. The body density, however, showed different pattern. In middle school ages, body density showed little variation. Density in 13-14 years was 1.0608, in 14-15 years 1.0578 and in 15-16 years 1.0546. In high school ages density in-creased abruptly to 1.0703 (16 yr.), 1.0730 (17 yr.) and 1.0740 (18 yr.). Subsequently 15 years was a boundary for density change and total body fat change. In middle school boys as a group of 48 the observed values were: density: 1.0562, total body fat: 15.9%, mean skinfold thickness at four sites: 6.02 mm. The coefficient of correlation between mean skinfold thickness and density were r=-0.759 and r=0.781 with %fat. The regression equations were : Body $density=-0.00527{\times}Mean$ skinfold thickness (mm)+1.0879, %Fat=$1.933{\times}Mean$ skinfold thickness (mm)+4.26 In high school boys the values were: density: 1.0723, body fat: 10.4%, and mean skinfold thickness: 7.89 mm. Coefficients of correlation between mean skinfold thickness and density were r=-0.868 and r=0.855 with % fat. Thus, Body density=$-0.00365{\times}Mean$ skinfold thickness (mm)+1.1008, and %Fat=$1.326{\times}Mean$ skinfold thickness (mm)-0.064, were obtained. Although skinfold thicknesses at 4 sites showed a continuous increase in absolute value as age increased, relative growth of skinfold at specific site differed. On arm the growth of skinfold showed a decrease and on waist it showed an increase as compared to the mean thickness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.874-877
• /
• 2002

The optogalvanic signals were measured using hollow cathode discharge tube with argon as buffer gas at change of discharge currents. A change of ionization rate due to electron collision causes an increase or decrease of the electric conductivity. This change in electric conductivity generates the optogalvanic signal. We conclude that optogalvanic signal has close relation with the lowest metastable atoms density at low current.

• 대기
• /
• 제18권2호
• /
• pp.111-120
• /
• 2008

This study presents a change-point in the 30 years (1976-2005) time series of the annual and the heavy precipitation characteristics (amount, days and intensity) averaged over South Korea using Bayesian approach. The criterion for the heavy precipitation used in this study is 80 mm/day. Using non-informative priors, the exact Bayes estimators of parameters and unknown change-point are obtained. Also, the posterior probability and 90% highest posterior density credible intervals for the mean differences between before and after the change-point are examined. The results show that a single change-point in the precipitation intensity and the heavy precipitation characteristics has occurred around 1996. As the results, the precipitation intensity and heavy precipitation characteristics have clearly increased after the change-point. However, the annual precipitation amount and days show a statistically insignificant single change-point model. These results are consistent with earlier works based on a simple linear regression model.

• 정신신체의학
• /
• 제1권1호
• /
• pp.35-44
• /
• 1993

This study was aimed at investigating the relationship of stress perception and psychopathology with biological variables such as systolic and diastolic blood pressure. serum total cholesterol high density lipoprotein and triglyceride in 50 adult patients with essential hypertension and 50 normotensive individuals. Both of the groups were matched to each other regarding age, sex, the level of education and BMI(body mass index). Stress perception and psychopathology between the two groups were compared using GARS and SCL-90-R scales. Biological variables such as blood pressure(systolic. diastolic), serum total cholesterol, high density lipoprotein and triglyceride were measured in all the subjects. The results were as follows ; 1) Hypertensive patients scored significantly higher than normotensive individuals in stress perception related to unusual happenings, change or no change in routine and overall global area, respectively. 2) Regarding psychopathology, hypertensive patients scored significantly higher than normotensive individuals in depression. hostility and interpersonal sensitivity. respectively. 3) Systolic blood pressure had a significantly positive correlation with scores of stress perception related to sickness and injury, and change or no change in routine, respectively. Diastolic blood pressure had a significantly positive correlation with scores of stress perception related to change or no change in routine. 4) In hypertensive patients. the level of serum total cholesterol had a significantly positive correlation with scores of stress perception related to unusual happenings. However, the level of serum triglyceride had a significantly negative correlation with scores of stress perception related to changes in relationships, sickness or injury, and change or no chang in routine. 5) There were no significant correlations between scores of stress perception and biological factors in the normotensive group. 6) The level of serum triglyceride correlated negatively with phobic anxiety in hypertensive group. whereas it correlated positively with PSDI in normotensive group. In conclusion, these results suggest that hypertensive patients have higher level of stress perception and psychopathology than normal individuals. In hypertensive patients, their stress perception is suggested to be correlated with serum cholesterol.

• Computers and Concrete
• /
• 제32권3호
• /
• pp.287-302
• /
• 2023

Corrosion of reinforcing bars in reinforced concrete structures due to chloride attack in environments containing chloride ions is one of the most important factors in the destruction of concrete structures. According to the abundant reports that the corrosion rate around the repair area has increased due to the macro-cell current known as the incipient anode, it is necessary to understand the effective parameters. The main objective of this paper is to investigate the effect of the kinetic parameters of corrosion including the cathodic Tafel slope, exchange current density, and equilibrium potential in repair materials on the total corrosion rate and maximum corrosion rate in the patch repair system. With the numerical simulation of the patch repair system and concerning the effect of parameters such as electromotive force (substrate concrete activity level), length of repair area, and resistivity of substrate and repair concrete, and with constant other parameters, the sensitivity of the macro-cell current caused by changes in the kinetic parameters of corrosion of the repairing materials has been investigated. The results show that the maximum effect on the macro-cell current values occurred with the change of cathodic Tafel slope, and the effect change of exchange current density and the equilibrium potential is almost the same. In the low repair extant and low resistivity of the repairing materials, with the increase in the electromotive force (degree of substrate concrete activity) of the patch repair system, the sensitivity of the total corrosion current reduces with the reduction in the cathode Tafel slope. The overall corrosion current will be very sensitive to changes in the kinetic parameters of corrosion. The change in the cathodic Tafel slope from 0.16 to 0.12 V/dec and in 300 mV the electromotive force will translate into an increase of 200% of the total corrosion current. While the percentage of this change in currency density and equilibrium potential is 53 and 43 percent, respectively. Moreover, by increasing the electro-motive force, the sensitivity of the total corrosion current decreases or becomes constant. The maximum corrosion does not change significantly based on the modification of the corrosion kinetic parameters and the modification will not affect the maximum corrosion in the repair system. Given that the macro-cell current in addition to the repair geometry is influenced by the sections of reactions of cathodic, anodic, and ohmic drop in repair and base concrete materials, in different parameters depending on the dominance of each section, the sensitivity of the total current and maximum corrosion in each scenario will be different.