• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.131-141
• /
• 2006

Hydrobromic acid salt of a $N_2O_2$ tetradentate ligand, N,N'-bis(2-hydroxybenzyl)-ethylene-diamine ($H-BHE{\cdot}2HBr$) was synthesized. $Br-BHE{\cdot}2HBr$, $Cl-BHE{\cdot}2HBr$, $CH_3-BHE{\cdot}2HBr$ and $CH_3O-BHE{\cdot}2HBr$ having Br, Cl, $CH_3$ and $CH_3O$ substituents at 5-position of the phenol group of $H-BHE{\cdot}2HBr$ were also synthesized. $Nap-BHE{\cdot}2HBr$ having naphthalen-2-ol instead of the phenol group was also synthesized. The potentiometry study in aqueous solution revealed that the proton dissociations of the synthesized ligands occurred in four steps and the order of the calculated overall proton dissociation constants (${\log}{\beta}_p$) of each ligand was Br-BHE < Cl-BHE < H-BHE < Nap-BHE < $CH_3$-BHE < $CH_3O$-BHE. The order showed a similar trend to that of Hammett substituent constants(${\sigma}_P$). The order of the stability constants (${\log}K_{ML}$) was CO(II) < Ni(II) < Cu(II) > Zn(II) > Cd(II) > Pb(II). The order in their stability constants (${\log}K_{ML}$) of each transition metal complex agreed well with that of the overall proton dissociation constants (${\log}{\beta}_p$).

• Journal of Microbiology and Biotechnology
• /
• v.1 no.2
• /
• pp.136-141
• /
• 1991

Optimum culture conditions for the formation of nitrile hydratase by Brevibacterium sp. CH2 were investigated. Addition of ferric and ferrous ions greatly increased the nitrile hydratase formation. The effects of nitriles, amides, and acids as an inducer on the formation of nitrile hydratase were investigated. Isobutyramide was the best inducer among the tested compounds. When Brevibacterium sp. CH2 was cultivated for 23 h at $30^{\circ}C$ in a optimized medium containing 15 g of glucose, 5 g of bacto peptone, 3 g of yeast extract, 3 g of malt extract, 1 g of $KH_2$$PO_4$, 1 g of $K_2$$HPO_4$, 1 g of NaCl, 0.5 g of isobutyramide, 0.2 g of MgSO$_4$ㆍ7$H_2O$, and 0.02g of $FeSO_4$ㆍ$7H_2$O per liter of distilled water with pH controlled at 7.1, the maximum total activity was 665 units/ml of the culture broth and the specific activity was 70 units/mg of the dry cells. The medium optimization increased the specific activity of Brevibacterium sp. CH2 2.2 times.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.3
• /
• pp.137-141
• /
• 2006

Process window for infinite etch selectivity of silicon nitride $(Si_3N_4)$ layers to ArF photoresist (PR) was investigated in dual frequency superimposed capacitive coupled plasma (DFS-CCP) by varying the process parameters such as low frequency power $(P_{LF})$, $CH_2F_2$ and $H_2$ flow rate in $CH_2F_2/H_2/Ar$ plasma. It was found that infinite etch selectivities of $Si_3N_4$ layers to the ArF PR on both blanket and patterned wafers can be obtained for certain gas flow conditions. The etch selectivity was increased to the infinite values as the $CH_2F_2$ flow rate increases, while it was decreased from the infinite etch selectivity as the $H_2$ flow rate increased. The preferential chemical reaction of the hydrogen with the carbon in the polymer film and the nitrogen on the $Si_3N_4$ surface leading to the formation of HCN etch by-products results in a thinner steady-state polymer and, in turn, to continuous $Si_3N_4$ etching, due to enhanced $SiF_4$ formation, while the polymer was deposited on the ArF photoresist surface.

• Journal of fish pathology
• /
• v.34 no.2
• /
• pp.141-147
• /
• 2021

In this study, of the imported shrimps between 2017 and 2020, we investigated white spot syndrome virus (WSSV), covert mortality nodavirus (CMNV) and decapod iridescent virus 1 (DIV-1). Of the imported shrimps (a total of 29 groups), WSSV was detected as 31% (9/29) by nested PCR assay. And CMNV and DIV-1 were not identified in this study. To investigate the genetic relatedness of WSSV identified from imported shrimp, VR 14/15 region showed WSSV genomic variable loci was compared with reference isolates. Among the nine WSSV-positive samples, VR 14/15 region was amplified in only a sample (20-CH-1 isolate, imported from China in 2020). And the 20-CH-1 isolate showed 99.8% identity with WSSV-IN-05-01 which was reported in India in 2005, suggesting that those of WSSV have been spread from India to China. Furthermore, although the pathogenicity of WSSV identified from frozen shrimp was not evaluated, the international trade of diseased frozen shrimps could be led to the potential risk of virus transmission.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.139-141
• /
• 2013

In respect of environmental hazard or human safety, the use of the chloride-based packaging materials like polyvinyl chloride (PVC) blister and film, Polyvinylidene chloride (PVDC) laminated film has been restricted with national regulations. In this study, I intended to develope the reagent solution for identifying the chloride-based packaging materials, so that it was made by mixing methanol ($CH_3OH$) saturated with sodium hydroxide (NaOH) and pyridine as solvent with same ratio. The efficacy of this reagent solution was verified by the analysis of chemical mechanism and experiments that showed the color change (brown) of the specimens. This analysis methode using reagent solution is so simple, convenient, inexpensive and immediate that I expect it will be useful in the field of packaging.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.133-141
• /
• 2011

In this study, different calibration approaches for reduced sulfur compounds (RSCs) were investigated by using thermal desorption coupled with gas chromatography (GC) and pulsed flame photometric detection (PFPD). To evaluate the effects of calibration procedures, gaseous standards of 4 RSCs ($H_2S$, $CH_3SH$, DMS, and DMDS) prepared at 10 ppm level were analyzed at 7 loading injection volumes (40, 60, 80, 100, 160, 240, and 320 ${\mu}L$). The results were then compared with calibration curves made with the Z (zero offset) and N (non-zero offset) method. The concentrations of unknown samples were then quantified by using R (ratio) method in which the slope values are compared between standards and samples. Secondly, in A (average) method, results obtained from a multi-point analysis of unknown samples were also averaged to extract representative values for each sample. Results of both experiments showed that analytical error of low molecular weight components (such as $H_2S$ and $CH_3SH$) was greatly expanded with the Z method. In conclusion, the combined application of N-A method was the more realistic approach to reduce biases in the quantification of RSCs.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.3
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.54-61
• /
• 1998

This study was conducted in order to evaluate the treatment efficiencies of anaerobic packed and fluidized-bed biofilm and to investigate applicability in treating livestock wastewater. Biocarbonate alkalinity(BA) and volatile fatty acid(VFA) were about 3,230-3,270 mg/l, 3,790-3,126 mg/l(as CaCO$_3$) and 224-402 mg/l, 141-387 mg/l(as CH$_3$COOH), and VFA/BA ratio was about 0.069~0.12, 0.045-0.12 in packed and fluidized-bed biofilm. When COD loading rate was 6.0 kg COD/$m^3\cdot$ day in packed and fluidized-bed biofilm, methane gas production were 3.23 l/day and 4.38 l/day, respectively. In the same COD loading rate, methane gas production volumes per kg COD removal were 0.25 m$^3$ CH$_4$/kg COD$_{rm}$ and $0.28 m^3 CH_4/kg COD^{rm}$, respectively. At this time, it could be estimated that fluidized-bed biofilm was more high. In case of HRT 0.94 day(6.0 kg COD/$m^3\cdot$ day) and 11 day(0.5 kg COD/$m^3\cdot$ day), packed-bed biofilm showed 59% and 81% COD removal efficiency, respectively. While fluidized-bed biofilm showed 72% and 85% removal efficiency, respectively. It was showed that fluidized-bed biofilm was more efficient. Packed-bed biofilm was higher than fluidized in treatment efficiencies of organic matters, but required continuous treatment using combined system, because it was very exceeded over an environmental standard solidified from '96 year. In operating fluidized-bed biofilm, if farm house consider high power cost according to high circulation ratio in an economic point of view, it would have an effect that farm house use packed-bed biofilm as combined system in treating livestock wastewater.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2005

Nitric oxide(NO) reduction by methanol was investigated over $La_2O_3$ catalysts in the presence and absence of oxygen. In the absence of $O_2$, $CH_3OH$ reduced NO to both $N_2$ and $N_2O$, with selectivity to $N_2$ formation decreasing from 81-88% at 623K to 47-71% at 723 K. With 1.2% $O_2$ in the feed, the rates were 4-8 times higher, but the selectivity to $N_2$ dropped from 50% at 623 K to 9% at 723 K. The specific activities with $La_2O_3$ for this reaction were higher than those for other reductants; for example, at 773 K with hydrogen a specific activity of $34\;{\mu}mol\;NO/sec{\cdot}m^2$ was obtained whereas that for methanol was $638\;{\mu}mol\;NO/sec{\cdot}m^2$. The Arrhenius plots were linear under differential reaction conditions, and the apparant activation energy was consistantly near 15 kcal/mol with $CH_3OH$. Linear partial pressure dependencies based on a power rate law were obtained and showed a near-zero order in $CH_3OH$ and a near-first order in $H_2$.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.141-145
• /
• 2004

The objective of the present study is to conduct model combustion tests for various injectors to identify their combustion stability characteristics. Three different double swirl coaxial injectors with variation of a recess length have been tested for the comparative study of CH flame structure and dynamic characteristics. Gaseous oxygen and mixture of gaseous methane and propane have been employed for simulating actual propellants used for a full-scale thrust chamber. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.