• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.34-40
• /
• 2005

본 연구에서는 비정상 유동해석을 위한 CFD 코드의 개발을 위해 대각화 ADI 기법을 적용한 정상 해석기법과 내재적 이중시간 전진기법을 도입하였다. 정상상태 Navier-Stokes 방정식의 Jacobian 행렬은 비점성항에 대해서만 적용하였고 여기에 내재적 인공점성 연산자를 첨가하여 블록 5대각 행렬을 유도하였다. 시간단축을 위해 스칼라 5대각 행렬로 대체하였다. 가상시간에 대한 정상상태기법에 실시간에 대한 미분항이 포함된 새로운 잔류항을 정의하였다. 가상시간에 대해 수렴된 해로부터 실시간 해를 구하고 시간에 대해 적분을 수행하는 내재적 이중시간 전진기법을 이용한 비정상 Navier-Stokes 코드를 개발하였다. 이에 대한 검증으로 정지한 유체속에 진동하는 평판문제, 원기둥 후방의 주기적인 Karman 와류생성, 이중원호 익형주위의 충격파 진동문제등을 수치해석하여 이론치, 실험치, 타연구자의 계산결과와 비교, 분석하였다.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.461-468
• /
• 2012

In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.552-567
• /
• 2017

The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.282-290
• /
• 2013

The effects of the combination of blade number for forward and after propeller on the propeller shaft forces of a contra-rotating propeller (CRP) system are presented in the paper. The research is performed through the numerical simulations based on the Reynolds-Averaged Navier-Stokes equations (RANS). The simulation results of the present method in open water condition are validated comparing with the experimental data as well as the other numerical simulation results based on the potential method for 4-0-4 CRP (3686+3687A) and 4-0-5 CRP (3686+3849) of DTNSRDC. Two sets of CRP are designed and simulated to study the effect of the combination of blade number in behind-hull condition. One set consists of 3-blade and 4-blade, while the other is 4-blade and 4-blade. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. From the simulation results, the fluctuations of axial force and moment are dominant in the case of same blade numbers for forward and after propellers, whereas the fluctuations of horizontal and vertical forces and moments are very large in the case of different blade numbers.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1289-1297
• /
• 2005

The flow in a microchannel is usually characterized as a low Reynolds number (Re) so that good mixing is quite difficult to be achieved. In this regard, we developed a novel chaotic micromixer, named Serpentine Laminating Micromixer (SLM) in the present study, Part 1. In the SLM, the higher level of chaotic mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other term, lamination) mechanism is obtained by the successive arrangement of 'F'-shape mixing units in two layers. The chaotic advection is induced by the overall three-dimensional serpentine path of the microchannel. Chaotic mixing performance of the SLM was fully characterized numerically. To compare the mixing performance, a T-type micromixer which has the same width, height and length of the SLM was also designed. The three-dimensional numerical mixing simulations show the superiority of the SLM over the T-type micromixer. From the cross-sectional simulation results of mixing patterns, the chaotic advection effect from the serpentine channel path design acts favorably to realize the ideal lamination of fluid flow as Re increases. Chaotic mixing mechanism, proposed in this study, could be easily integrated in Micro-Total-Analysis-System, Lab-on-a-Chip and so on.

• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.77-82
• /
• 2019

소화설비는 예상치 못한 화재를 진압하는 설비이며, 방호대상과 장소에 따라 부합한 소화약제를 사용해야한다. 이 중 가스계 소화설비는 물에 취약한 전자장비 등을 방호하기 위하여 사용되는데, 이 때문에 화학적 반응이 없는 불활성 기체가 주로 적용된다. 하지만 최근 전자장비들의 고집적화로 인하여 가스계 소화설비로부터 발생하는 소음이 전자장비에 손상을 주는 사례가 대두되고 있다. 이에 본 연구에서는 가스계 소화설비를 개선하고자, 노즐 수축각에 따른 유동소음을 수치적으로 계산 및 분석하였다. ANSYS FLUENT ver. 18.1을 사용하여 수치해석을 수행하였으며, 스월 분포를 고찰하여 유동소음에 대한 원인을 분석하였다. 개선된 모델은 기본 모델 대비 약 6 dB가 감소된 것을 확인하였으며, 이는 가스계 소화시스템 노즐 수축각이 방출소음 저감에 영향력 있는 인자임을 확인하였다.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.236-240
• /
• 2011

In order to deposit a homogeneous and uniform ${\beta}$-SiC films by chemical vapor deposition, we demonstrated the phase stability of ${\beta}$-SiC over graphite and silicon via computational thermodynamic calculation considering pressure, temperature and gas composition as variables. The ${\beta}$-SiC predominant region over other solid phases like carbon and silicon was changed gradually and consistently with temperature and pressure. Practically these maps provide necessary conditions for homogeneous ${\beta}$-SiC deposition of single phase. With the thermodynamic analyses, the CVD apparatus for uniform coating was modeled and simulated with computational fluid dynamics to obtain temperature and flow distribution in the CVD chamber. It gave an inspiration for the uniform temperature distribution and low local flow velocity over the deposition chamber. These calculation and model simulation could provide milestones for improving the thickness uniformity and phase homogeneity.

• 실천공학교육논문지
• /
• 제7권2호
• /
• pp.119-123
• /
• 2015

ABS 소재는 가공이 쉽고 충격과 열에 대한 내성이 강해 가전제품뿐만 아니라 자동차용 내외장재 금속 대체용으로도 많이 사용되고 있다. 이러한 특성으로 ABS의 수요가 늘어감에 따라 ABS를 이용한 가공교육도 그 중요성이 커지고 있다. 그 교육의 일환으로 전국 기능대회 및 지방 기능대회 금형 가공 부분에서 ABS 소재가 쓰이고 있다. 이때 ABS 소재를 이용한 가공에 있어서 ABS 소재를 고정하는 바이스의 힘은 가공 후 최종 형상에 영향을 미치게 된다. 하지만 가공 교육 작업 주의사항이나 지시사항 등에 이에 관한 정확한 명시가 되어있지 않은 상황이다. 따라서 이번 연구에서는 ABS 소재를 이용한 가공 교육에 있어서 교육에 사용하는 기초 형상에 대한 바이스의 고정시키는 힘이 가공 후 최종 형상에 미치는 영향을 알아보고, ABS 소재의 가공 교육 시 적합한 바이스 주의사항을 제시하고자 한다.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.87-110
• /
• 2020

Catamaran has recently been a choice to support a typical vertical axis turbine in floating tidal current energy conversion system. However, motion responses associated with the catamaran can reduce the turbines efficiency. The possibility to overcome this problem isto change the catamaran parameter by varying and simulating the demi-hull separations to have lower motion responses. This simulation was undertaken by Computational Fluid Dynamic (CFD) using potential flow analysis. Cases of demi-hull separation were considered, with ratios of demi-hull separation (S) to the breadth of demi-hull (B), ^S/_B of 3.45, 4.95, 6.45, 7.2 and 7.95. In order to compare to the previous works in the literature, the regular wave was set with wave height of 0.8 m. Furthermore, the analysis was carried out by irregular waves with significant wave height, H_s, of about 0.09 to 1.5 m and the wave period, T, of about 1.5 to 6 s or corresponding to the wave frequency, ω, of about 1.1 to 4.2 rad/s. The wave spectrum was derived from the equation of the International Towing Tank Conference (ITTC). For the case of turbines-loaded catamaran under consideration, the new finding is that the least significant amplitude response can be satisfied at the ratio ^S/_B of 7.2. This study indicates that selecting a right choice of demi-hull separation ratio could contribute in reducing motion responses of the tidal current turbines-loaded catamaran.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.117-127
• /
• 2015

This study investigated the smoke blocking and control systems for the safety of residents evacuation and for the prevention of smoke spread through the central corridor in the event of central corridor type of intelligent building fire. We offered additional ways of utilizing smoke ventilators and intake ventilation equipment and utilized CFD-based fire simulation program(FDS Ver.5.5.3) in order to analyze the effect. As a result, many differences in the smoke block effect, depending on the application of smoke ventilator and location of installation, was found. In addition, the result was found that larger effect was showed not in the case of application of smoke ventilator in central corridor only but application in fire room. The reason is that the smoke leakage is blocked primarily as air is flowed in the fire room through open door by operation of intake smoke ventilator in the public corridor and secondarily, the smoke leakage to the public corridor could be blocked as fire and smoke were released to the opened smoke ventilator continuously. Especially, the effect was maximized through complex interactions by applying smoke ventilator and intake ventilation equipment in corridor together rather than applying smoke ventilator and intake ventilation equipment independently. The proposed measure through this study shall be considered from architectural plan as one of ways for blocking from smoke spread to the central corridor in the central corridor type of intelligent building. In addition, flaws on regulation shall be established and supplemented.