• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1570-1578
• /
• 2000

A quadrature pair of filter banks that are composed of a pair of cosine and sine modulated filter banks is applied to MC-CDMA data transmultiplexing in the view point of mitigating inter-channel interferences. Exploiting superior capabilities of wavelet properties in composing the filter banks the proposed scheme is capable of compromising inter-channel interference problems better than the conventional DFT-based MC-CDMA due to superior subchannelization effects. To verify the behavior of our proposed MC-CDMA system based on the quadrature filter banks the reverse-link bit error rates with respect to signal-to-noise ratio under Rayleigth fading and additive white Gaussian noise channel environments are computed. The results show an improved system performance over the conventional MC-CDMA in the view point of minimizing interference effects.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1113-1116
• /
• 1998

This paper presents an efficient hardware architecture of demodulating fingers to demodulate the multi-path propagating signals in MC-CDMA Mobile System. We design a new architecture of demodulating fingers which share the single arithmetic unit to reduce the hardware complexity. This arithmetic unit performs MAC(Multiplication and Accumulation) operations of all demodulating fingers. The proposed architecture is suitable for Is-95 based CDMA PCS system. Three demodulating fingers for MC-CDMA which demodulate 7 channels contain about 42K logic gates. Our proposed system is shown to be very useful for Multi-Code CDMA system in which several channels are demodulated simultaneously.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.498-500
• /
• 2005

In a CDMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity Different rate data traffic requires different transmitted power and rate controlling enables the system utilize radio resource more efficiently. A very simple rate control algorithm for data calls in CDMA2000 1x system is proposed. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is easy to implement in power controlled CDMA systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.438-443
• /
• 2006

In this paper, We had proposed SDR module, and designed FPGA to compose with channel separation of broadband CDMA signal what have multiple FA. At decomposition and composition process of multiple FA CDMA signal, system only progress decomposition and composition of channel selected by software. Therefore, proposed system can manage base station transceiver system very effectively than the other way what send on all band of multiple CDMA signal. Also, it is possible that system sets again coefficient of each filter because it is consisted of SDR module. Therefore, we can easily control coefficient each filter according to base station transceiver system environment.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.297-301
• /
• 2003

The binary clipping PW/CDMA system is considered. This system can be constructed with effective cost. leading to reduce the influence of the non-linear amplifier because of converting multi-level signals into constant envelope signals. In addition, the clipping method which is to clip out signal amplitude at some level when multi-level signals are converted into constant envelope signals is used. The multi-level signals are clipped at 1 and -1 to limit the extension of bandwidth and to maintain the bandwidth after clipping. In this paper, the performance of the binary clipping PW/CDMA system with the non-linear amplifier analyzed by simulation over AWGN and flat fading channels respectively. The binary clipping PW/CDMA system with the non-linear amplifier is 2.2dB and 0.9dB better than conventional DS/CDMA system over the flat fading channels when the number of users are 9 and 17 respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.239-244
• /
• 2012

In this paper, we first introduce our own binary CDMA technology. Then we propose a wireless distribution automation system using the binary CDMA technology. The major research items are the binary CDMA distribution automation system, piconet configuration for remote control and monitoring, scheduling for the transmission and reception of data, and ways of applying encryption to protect wireless packet. To verify the possibility of applying wireless transmission to the distribution automation system, we experiment the implemented system in terms of the transmission rate by applying it to a real-world environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1869-1876
• /
• 2014

Car rear-view camera system supplies various services for life protection, ease of parking, and safe driving by showing the rear of the vehicle through monitor when reversing the car. In this paper we researched development methods and design of a Car Rear-view Camera System based on the Binary CDMA technology - new technology of wireless personal area network developed by Korea - that makes free installation without wired cables restriction and reduces installation costs and technology royalties.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.1-8
• /
• 2009

DS-CDMA system has very low bandwidth efficiency, hence it is difficult to maintain high spreading gain for high speed data transmission. Offset stacked spreading CDMA(OSS-CDMA) is a transmission scheme where spreading codes with chip offsets are overlapped, then transmitted. This kind of system requires a code set that guarantees orthogonality between codes in the set of any cjip offset. An orthogonal complementary code set has a property that the crosscorrelation function between codes in the group is zero for all shifts, hence it can be used for an OSS-CDMA system. In an OCC-OSS CDMA system each user is assigned an orthogonal complementary code group. User data bit is spread by the given codes and overlapped, and the code sequences are transmitted with multicarrier. However, the offset stacked spread sequences are multilevel, and the number of symbol levels is increases as the spreading efficiency is increased. When the OSS sequence is transmitted with MPSK mapping, the signal constellation becomes dense, and the system is easily affected by channel impairments. In this paper, we propose a level clipping scheme on OSS sequence before MPSK modulated. Simulations have been carried out to investigate the BER performance of the OCC-OSS CDMA system in AWGN environment. The results show that proposed scheme outperform the scheme without level clipping.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.663-669
• /
• 2012

To solve the energy problem and finding new growth engines, interest for the smart grid is increasing and related technologies are making great efforts to secure in the world. AMI (Advanced Metering Infrastructure) Among them is the first to be constructed and getting attention as a key component of smart grid. A fusion of various technologies in technology development and demonstration is underway on Jeju Island Smart Grid Demonstration Complex in Korea, and focusing on broadband power line communication technology infrastructure is actively underway in Korea Electric Power Corporation. AMI system using power line communication technology without building a separate communication lines are available for power supply lines, but communication is impossible in occurs because admission to the power company or the ideal infrastructure for communication is not considered. In this paper, we analyze the requirements to build AMI system using Binary CDMA and powerline communications technology, and design the basic communication protocol based on Binary CDMA, implement network management and relay feature. By doing so, ways to apply Ad-hoc Binary CDMA indigenous technology to the AMI system were derived, and could build a system to make use of Wired (PLC) and wireless (Binary CDMA) simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1011-1017
• /
• 2004

Ultra Wideband(UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Korean Cellular CDMA and WCDMA. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum CDMA(DS-CDMA) UWB source and an impulse radio UWB source, to a Cellular CDMA and WCDMA digital transmission system. The average frame error rate degradation of each system are presented. From these experimental results, the interference effects of DS-CDMA UWB source is not severe compared to the Impulse UWB.