• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.173-178
• /
• 2006

In this paper, a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems are analyzed with an emphasis on a preamble design for multi-channel separation, From the computer simulation results, the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D = 4 and D = 8 for both multi-user cases of maximum user and half user capacities, respectively

• ETRI Journal
• /
• v.19 no.3
• /
• pp.228-241
• /
• 1997

In this paper, we present a design of modem and vocoder digital signal processor (DSP) chips for CDMA mobile station. The modem chip integrates CDMA reverse link modulator, CDMA forward link demodulator and Viterbi decoder. This chip contains 89,000 gates and 29 kbit RAMs, and the chip size is $10 mm{\times}10.1 mm$ which is fabricated using a $0.8{\mu}m$ 2 metal CMOs technology. To carry out the system-level simulation, models of the base station modulator, the fading channel, the automatic gain control loop, and the microcontroller were developed and interfaced with a gate-level description of the modem application specific integrated circuit (ASIC). The Modem chip is now successfully working in the real CDMA mobile station on its first fab-out. A new DSP architecture was designed to implement the Qualcomm code exited linear prediction (QCELP) vocoder algorithm in an efficient way. The 16 bit vocoder DSP chip has an architecture which supports direct and immediate addressing modes in one instruction cycle, combined with a RISC-type instruction set. This turns out to be effective for the implementation of vocoder algorithm in terms of performance and power consumption. The implementation of QCELP algorithm in our DSP requires only 28 million instruction per second (MIPS) of computation and 290 mW of power consumption. The DSP chip contains 32,000 gates, 32K ($2k{\times}16\;bit$) RAM, and 240k ($10k{\times}24\;bit$) ROM. The die size is $8.7\;mm{\times}8.3\;mm$ and chip is fabricated using $0.8\;{\mu}m$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.67-70
• /
• 1999

DS-CDMA is used to widely spread spectrum for a cellular mobile digital communication that maximizing users- capacity at the limited frequency bandwidth, solving technical matters with the channel. Especially, the capability of a spread spectrum receiver relied on fast code acquisition time at the demodulation. In this paper, we considered that fast code acquisition time when a spread spectrum system is designed, and existed code acquisition system set up one code epoch on a position at initial processing, but the proposed code acquisition system improved that two code epoch are set up at the same time, therefore code acquisition time is diminished in effect. The structure modeling to VHDL language. Its synthesized the synthesized and, is implemented FPGA chip

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.265-275
• /
• 2004

In this paper, an OFDM-CDMA broadband system is considered for a possible candidate of fixed wireless broadband access network applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the ETSI HlPERLAN/2 and IEEE-802.11a standards in the case of more than two transmit antennas. Also, an effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D = 4 and D = 8 for both multi-user cases of maximum user and half user capacities, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.567-574
• /
• 2003

It is important to design and evaluate the chip waveform with the minimum MAI under the bandwidth constraint in the interference-limited DS-CDMA system. In this paper, by approximation we present the analytical chip waveforms that are proposed and optimized in the reference. Their performances are compared with performances of three conventional chip waveforms: rectangular, half-sine and raised-cosine. Waveform 1 of the proposed chip waveform outperforms the conventional ones. BER and throughput performance are evaluated in the Rayleigh and Nakagami-m fading channels when DPSK modulation is used. When the required BER is 10$\^$-3/ in two fading channels, the capacity of the waveform 1 is improved about 20 % rather than raised-cosine one. When the offered traffic is 30 and the number of packet per bit(N$\sub$d/) is 14, maximum throughput of the waveform 1 is better than raised-cosine chip waveform about 18 % in two fading channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.39-48
• /
• 2006

In this paper, we analyze the spectral efficiency of multicarrier-code division multiple access (MC-CDMA) scheme. First, we derive a generalized formula for the spectral efficiency according to the number of subcarriers involved in, code division multiplexing and the number of codes used (i.e., loading factor), under a given set of channel coefficients. Also, we derive a generalized formula for spectral efficiency of various reduced-complexity systems that divide the full sets of subcarriers into several groups of subcarriers for code division multiplexing. Then, through these derivations, we establish an inter-relationship between the frequency selectivity and diversity order according to the number of multipaths. From the results, we choose the smallest code length while maximizing the diversity effect, provide an optimum subcarrier allocation strategy, and finally suggest a system structure for capacity-maximizing under the smallest code length. Through numerical analyses under simulated environments, we analyze the properties of spectral efficiency of various systems with reduced complexity and choose a major contributing factors to system design and a better system design methodology. Finally, we compare the spectral efficiency of the MC-CDMA scheme and orthogonal frequency division multiplexing (OFDM) scheme to make a relationship between both schemes.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.200-211
• /
• 1998

A DS/CDMA system that makes all base stations require equal received power for all mobiles can lead to the non-uniform quality of service when mobiles are non-uniformly located over a service area. In order to resolve this problem the base-received power should be controlled according to base's load in order to make the quality of service uniform, and the pilot power also has to be adjusted to maintain the balance of cell coverage between reverse link and forward link. In this paper, we propose a generalized model including Pilot Power control, base-received power control on the reverse link, transmission power allocation on multiple forward link, and soft handoff on both links. We also apply our model to an initial system design as an example.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2001

The 3-step cell search has been considered for fast acquisition of the scrambling code unique to a cell in the W -CDMA system. In this paper, the performance of the cell search scheme is analyzed in Rayleigh fading channels. And the system parameters for cell search scheme and the design parameters for the receivers are examined. The probabilities of detection, miss and false alarm for each step are derived in closed forms based on the statistics of CDMA noncoherent demodulator output. Through the analysis, the effect of threshold setting and post detection integration for each step is investigated, and the optimal values of the power allocation for the synchronization channels are also considered. The number of post-detection integrations for each step is a design parameter for the receiver, and the optimum values may depend on not only the power allocation for each channel related to the cell search, but the false alarm penalty time. It is shown that optimal values could be determined through the analysis. Also, the cumulative probability distribution of the average cell search time is obtained.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.1
• /
• pp.51-54
• /
• 1998

In this paper, RF receiver for CDMA system which has 10 MHz in the channel bandwidth has been designed and fabricated. The designed and fabricated RF receiver is shown useful in operation and the performance has been confirmed by experiments. The results are to be used for establishment of a broadband CDMA wireless access specification standard for WLL system in 2.3 GHz band.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.735-741
• /
• 2011

In this paper, we have analyzed the effect of SNR estimation error on the BER performance of MMSE-DFE in high-speed binary CDMA system. Since MMSE equalization algorithm requires the SNR value of input signal, it should be estimated using CAZAC sequence in preamble. However, when AWGN and ISI exist simultaneously, it is impossible to estimate the exact SNR value of input signal and thereby equalizer's performance may be deteriorated. The simulation results can be used as a guideline for selection of SNR estimation algorithm for MMSE-DFE design.