• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.963-966
• /
• 2001

The wideband DS-CDMA (W-CDMA) system is one of the candidates for the next generation mobile communication system known as IMT-2000. The important concept of W-CDMA is the introduction of intercell asynchronous operation. In this paper, we design and analyze the system level simulator for the International Mobile Tele communication - 2000 (IMT-2000) 3-rd generation partnership project (3GPP) system. We confirm how the simulator works by BER over different Eb/NO. This study will be expected to use as reference data in the development of asynchronous IMT-2000. In this paper, we analyze a physical layer of W-CDMA system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance in Rayleigh fading channel environment. This study will be useful in the analysis and design of W-CDMA system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.72-80
• /
• 2012

Binary CDMA is a new standard technology for wireless communication developed by our country that makes high speed communications and good quality of services. In this paper we researched the design and implementation methods of a wireless CCTV System based on the Binary-CDMA technology that makes it freely installed in any place without cables and laying works. We implemented the hardware and software for the CCTV system and developed a Prototype Wireless CCTV system based on the Binary-CDMA technology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.20-27
• /
• 2002

The demand for multimedia transmission in wireless networking is rapidly increasing. Performance evaluation in the CDMA system has been carried out on the voice-oriented system without re-transmission or buffering. We propose a multimedia access protocol with buffering and ARQ which can meet a variety of QoS requirements. We study the effect of buffering in MC-CDMA(Multi-Code CDMA) and design a dynamic rate control algorithms, whose simulation shows the efficiency of MC-CDMA.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.77-80
• /
• 2002

In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.17-20
• /
• 1999

In this Paper, we discuss reducing the number of orthogonal code in Multi-Code CDMA (MC-CDMA) system. MC-CDMA system is highlighted for multi-media communication services, but conventional MC-CDMA(CMC-CDMA) system are needed many more orthogonal codes compared to traditional direct sequence CDMA(DS-CDMA) systems. in this paper, we propose the system which can reduce the number of orthogonal codes using sub-orthogonal code(SOC) technique. We certificate that the performance of the proposed system shows the almost same result under gaussian noise environment as compared to CMC-CDMA system through Monte-Curio computer simulation method.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1113-1116
• /
• 1998

This paper presents an efficient hardware architecture of demodulating fingers to demodulate the multi-path propagating signals in MC-CDMA Mobile System. We design a new architecture of demodulating fingers which share the single arithmetic unit to reduce the hardware complexity. This arithmetic unit performs MAC(Multiplication and Accumulation) operations of all demodulating fingers. The proposed architecture is suitable for Is-95 based CDMA PCS system. Three demodulating fingers for MC-CDMA which demodulate 7 channels contain about 42K logic gates. Our proposed system is shown to be very useful for Multi-Code CDMA system in which several channels are demodulated simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1869-1876
• /
• 2014

Car rear-view camera system supplies various services for life protection, ease of parking, and safe driving by showing the rear of the vehicle through monitor when reversing the car. In this paper we researched development methods and design of a Car Rear-view Camera System based on the Binary CDMA technology - new technology of wireless personal area network developed by Korea - that makes free installation without wired cables restriction and reduces installation costs and technology royalties.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.220-229
• /
• 1996

We presetn sytem-level simulation methodology as well as environment setup established for CDMA digtial cellular mobile station in an effort to verify CDMA modem ASIC design. To make the system-level simulation feasible, behavioral modeling of a microcontroller was first carried out with VHDL. In addition, models written in C language were also developed to provide ASIC with realistic input data. Finally, the netlist of CDMA modem ASIC was loaded on the a hardware accelerator, which was interfaced with VHDL simulator, and ismulation was performed by excuting the actual CDMA call processing software. Simulation resutls thus obtained were confirmed by comparing them with the emulation resutls from the actual system constructed on hardware modeler. these methods were proved to be effective in both discovering in advance malfunctions when embedded in the system or design errors of ASIC and reducing simulation time by a factor of as much as 20 in case of simulation at gate-level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.322-330
• /
• 2011

Binary CDMA is a new standard technology for wireless communication developed by our country that makes high speed communications and good quality of services. In this paper we researched the development methods and design of a wireless CCTV System based on the Binary-CDMA technology that makes it freely installed in any place without cables and laying works.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.197-200
• /
• 2000

In this paper, The RF system of W-CDMA receiver is designed and the performance is analyzed. The linearity characteristic and the noise characteristic are presented in the performance. The linearity characteristic is analyzed by PN and IIP3. The noise characteristic is analyzed by NF. In addition, sweeping of the nonlinear components parameter affecting the linear performance is tested and the most maximal possible parameter to maintain the linear performance is introduced. The transceiver RF system of W-CDMA and cdma2000 is designed and presented adapting the nonlinear parameter introduced.