• IE interfaces
• /
• v.9 no.3
• /
• pp.180-193
• /
• 1996

본 논문에서는 시뮬레이션 모델을 통해 호유형뿐만 아니라 개인통신서비스에서 필수적인 핸드오버 및 위치등록 등의 모든 트래픽 유형을 고래했을 때 개인통신교환기(PCX : Personal Commuincations Exchange)에서의 지연시간을 분석하며, 지연시간에 대한 결과와 프로세서의 이용율로부터 개인통신교환기의 호처리 및 이동성처리용량을 분석하고 그에 따른 가입자의 수용능력을 추정한다. IPC(Inter-Processor Communications) 메시지의 송수신시간 및 메시지의 처리시간등 교환기 제어계의 성능분석에 필요한 입력 파라미터 값은 기존 ISDN(Integrated Services Digital Network) 및 CMS-MX(CDMA Mobile System-Mobile Exchange) 교환기의 측정자료를 이용하였다. 시뮬레이션 분석결과 PCX 교환기의 호처리 성능은 주로 번호번역 기능을 담당하는 프로세서인 NTP(Number Translation Processor)의 용량에 의해 결정되며, 가입자 밀도가 1,500명$/km^2$인 경우 호처리용량은 약 42만 BHC(Busy Hour Call Completion)로 추정되었고, 이에 상응하는 핸드오버 및 위치등록 처리용량은 각각 시간당 약 2만 6천히 및 40만 6천회로 나타났다. 이것은 가입자당 호처리 부하가 1.6BHC일 경우, 약 15만 7천 가입자를 수용할 수 있는 용량에 해당한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1333-1340
• /
• 2000

This paper shows that the Kronecker sequence, the rapid acquisition spreading code, can be used in packet wireless data communication systems. The general properties of the Kronecker sequence such as construction and correlation characteristics are described, and it is shown that the Kronecker sequence can use a partial-period correlation for a faster acquisition. Based on above Properties, it can be expected that the Kronecker sequence can be used in packet communication systems because the probability of false alarm for the Kronecker sequence is lower and flatter(that is, less sensitive to Ec/No variations) than that for the PN sequence under the assumption that both sequences have the same acquisition time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.232-238
• /
• 2006

We propose a novel call admission control scheme which improves the handoff drop and the new call block probabilities of high priority services, minimizing the negative impact on low priority services, in multimedia service cellular networks. This paper proposes three schemes to solve this problem; the packing scheme in which available channels of a cell distributed to each frequency channel are concentrated on one frequency channel and a high transmission rate service is assigned to the frequency channel; the queuing scheme in which the queue is used for high transmission rate calls; and the power reallocation scheme in which the power assigned to calls under service is temporarily reduced and a high transmission rate service is allowed. The simulation results revealed that our scheme improved the drop and the block probabilities of the high priority services compared with the conventional scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.126-133
• /
• 2010

Due to the deployment of various wireless networks originating from CDMA, GSM, and WLAN, it became very convenient to exchange information from one place to another. As compared with the traditional environments for one-way information distribution based on fixed radio frequency bands, the convenient wireless network environments will bring about many changes in positioning technologies based on global navigation satellites. Among the many changes to come, the reconfigurable receiver network is one of the most attractive concepts since it can be tailored to a specific application area among networked robots, formation flying, bridge monitoring, and traffic monitoring. As an initial study to develop a reconfigurable receiver network, this paper deals with the design and implementation of the key elements of the reconfigurable receiver netowork; server, broadcaster, and client. In the designed receiver network, a sever receives and decodes measurements from a reference receiver installed at a known location, a broadcaster processes and transfers the messages from servers to clients and manages connections with servers and clients, a client receives the messages from the broadcaster and performs differential positioning. A real-time experiment result is demonstrated to validate the functionalities of each network element.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.58-62
• /
• 2000

We Propose modulation scheme using I-Q modulation for transmitting different information simultaneously. For transmitting 1bit of each information, we apply QPSK scheme, for more bits, MAPSK. At the second modulation stage, We mix PN wavefoms with APSK waveforms for spreading bandwith. BER(Bit Error Rate) of each Information of the proposed scheme is analyzed on computer simulation. Finally we show power spectrum before and after spreading bandwidth.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.10-15
• /
• 1997

In this paper, an efficient LSF quantizer, named improved PSVQ(IPSVQ), is proposed to apply in the 8 kbps QCELP speech coder. By using 27 bits IPSVQ instead of 40 bits DPCM quantizer per frame, we can save 13 bits/frame and allocate those bits to the codebook gain and the pitch gain parameters. Hence we improve the overall performance of the QCELP codec. The enhanced QCELP shows the performance improvement of 0.9 dB SNR and 0.4 dB SEGSNR. Informal listening tests also confirm the improvement in the speech quality.

• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.9-18
• /
• 2004

Self-encoded multiple access (SEMA) is a unique realization of random spread spectrum. As the term implies, the spreading code is obtained from the random digital information source instead of the traditional pseudo noise (PN) code generators. The time-varying random codes can provide additional security in wireless communications. Multi-rate transmissions or multi-level grade of services are also easily implementable in SEMA. In this paper, we analyze the performance of SEMA in additive white Gaussian noise (AWGN) channels and Rayleigh fading channels. Differential encoding eliminates the BER effect of error propagations due to receiver detection errors. The performance of SEMA approaches the random spread spectrum discussed in literature at high signal to noise ratios. For performance improvement, we employ multiuser detection and Turbo coding. We consider a downlink synchronous system such as base station to mobile communication though the analysis can be extended to uplink communications.

• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.26-34
• /
• 2004

A blind interference canceller in the presence of subchipspaced multipath channels for direct-sequence code division multiple access (DS-CDMA) down-link system is considered. This technique is based on combining the existing blind interference canceller with a technique that involves assigning subchip-tap spacing to the Rake receiver. The proposed receiver minimizes the receiver’s output energy subject to a constraint in order to mitigate the multiple access interference (MAI) along each multipath component, and then suboptimally combining all the multipath components. Moreover, it is able to mitigate the mismatch problem when subchip-spaced multipath components arrive at the blind interference canceller. It is known that optimal combining techniques perform a decorrelation operation before combining, which requires both knowledge and computational complexity. In the following, we have adopted a simpler but suboptimum approach in the combining of the suppressed signals at the output of our proposed receiver. Computer simulation results verify the effectiveness of the proposed receiver to handle subchip-spaced multipath components and still suppresses MAI significantly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.9-14
• /
• 2009

In this paper, using the binary (N,M,L,1) low correlation zone(LCZ) sequence set with specific property, we propose the construction method of a quaternary LCZ sequence set with parameters (2N,2M,L,2). The binary LCZ sequence using this method must have period $N{\equiv}3$ mod 4, balance property, and specific correlation property. The proposed method is modified from the construction method of binary LCZ sequence set by using binary LCZ sequence with specific condition proposed by Kim, Jang, No, and Chung[4].

• Information and Communications Magazine
• /
• v.28 no.9
• /
• pp.3-9
• /
• 2011

본고에서는 급속히 성장하고 있는 M2M 서비스의 융합과 발전을 위해 어떤 걸림돌이 있으며, 무엇을 준비해야 하는지에 대해 알아보고자 한다. 지난 1T839 정책에서 3대 인프라의 하나로 정의된 USN이 본격 확산에 미흡했던 사항에는 어떤 것들이 있었으며 당시 기술적인 환경과 서비스 사례를 통해 2% 부족했던 것들은 되짚어 보고, USN이 현재 시점에 가지는 의미를 찾아보고자한다. USN 서비스가 활성화 되던 시점에 M2M의 기반기술이라고 할 수 있는 (W)CDMA 등 광역 무선망 기술과의 접목이 어려웠던 부분과 USN의 다양한 근거리 무선 네트워크 기술들이 USN 서비스를 완벽히 구현하고 확산까지 갈 수 없었던 미흡했던 이유를 알아보고자 한다. 또한 M2M의 시작배경에는 어떠한 의미가 있으며, 현재에서 바라본 M2M은 시작과 비교해서 달라진 점이 무엇이며 현재에 요구되는 M2M은 무엇인지에 대해 논의해보고자 한다. 이와 함께 M2M의 다양한 정의와 현재의 M2M을 비교해보고 M2M이 급속히 증가하고 있는 이유들을 찾아본다. M2M 서비스를 크게 나누면 텔레매틱스와 텔레매트리로 나눌 수 있으며 최근에는 차량 관련된 분야에 M2M 서비스가 급속히 증가되고 있는데 해외의 eCall 서비스와 국내의 DTG 연계 M2M 서비스, 국가위험물관리 등 국내외 차량관련 M2M 서비스 사례를 분석해 보고, RFID/USN+LBS+M2M의 융복합 서비스 진화에 대해 알아보고자 한다. 끝으로 M2M 시대의 시대적 요구사항을 반영하여 M2M의 활성화를 위해서 필요한 공공과 민간의 역할을 짚어보고, 우리가 준비해야할 것에 대해 제언하고자 한다.