• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.244-250
• /
• 2014

Due to the difficulty in measuring very low out-of-band cutoff depths of solar blind UV filters, we propose a cutoff depth adjustable measurement system (CDAM) to test deep cutoff filters with a large dynamic range. The CDAM utilizing the substitution method is elaborately composed of several parts, including narrow-band LED light sources, standard reflective neutral attenuators with known attenuation coefficients, and a photomultiplier (PMT). This paper also presents an attenuator combination method ensuring that the PMT works within its linear response range. In addition, numerical simulation testifies to the method, and experiment shows that the CDAM system can achieve an extension of dynamic range from 0-6 OD to 0-10 OD, which is sufficient for the measurement of out-of-band cutoff depths of solar blind UV filters. Above all, the CDAM system, being easily implemented, of wide dynamic range, and highly precise, could be widely used in the measurement of filter cutoff depth.

• Journal of Korean Electronics
• /
• v.24 no.1
• /
• pp.42-46
• /
• 2004

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2025-2035
• /
• 2014

The read range of UHF mobile readers can be extended by a booster for mobile RFID readers (BoMR). But in an environment where multiple BoMRs are installed, the read success rate may be decreased due to signal interference. This paper proposes three arbitration methods based on interference estimation with the purpose of enhancing the read success rate. A central arbitration server manages global information in centralized arbitration method (CAM) without broadcast/multicast communication facility. In fully distributed arbitration method (FDAM), all the arbitration messages are broadcasted from a BoMR to every BoMR, and each BoMR decides with broadcasted global information. Events in FDAM are serialized naturally with broadcasted messages. Cluster Distributed Arbitration Method (CDAM) forms clusters with multicasted BoMRs and a selected BoMR acts as an arbiter in the cluster. Such effects as lengthened read range, improved the read success rates of readers can be obtained by the proposed methods without any hardware modification. In order to evaluate the arbitration methods, the RFID system is modeled by using the DEVS formalism and simulated by using the DEVSim++.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.21-30
• /
• 2004

The capacity of WCDMA TDD system is limited mainly by the interference. So, to achieve the expected performance of WCDMA TDD system and to minimize the interference to cdma2000 system interferences, such as interference within WCDMA TDD system inter-cell interference, and interferences between cdma2000 systems, should be considered carefully. In this paper, by using System-level Simulation, we analyzed the interferences between WCDMA TDD system and cdma2000 system in practical situation based on the exact parameters of 3GPP TR 25.942 and by using System-level Simulation considering Link-level we analyze the interferences between WCDMA TDD system and cdam2000 system. From Simulation Results, we propose the condition for optimizing system capacity considering the interferences between WCDMA TDD system ＆ cdam2000 system

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.65-70
• /
• 2001

In this paper a new scheme combining the turbo coder with parallel interference canceller, which effectively mitigates the effects of multiple access interferences and Ralyeigh fades in the DS-CDAM mobile communication systems is proposed Using the Monte-Carlo simulation, the performance of this scheme in terms of the number of users and signal to noise ration under AWGN and Ralyeigh fading environment is analyzed. The results of simulations show that the proposed scheme outperforms conventional CDMA receiver systems over Rayleigh fading as well as AWGN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1272-1281
• /
• 1994

CDMA technique has been largely focused for Wireless Data Network and PCN. ALOHA protocol also has been proven to be effective for Packet Radio Network regardless of low throughput due to channel colisions. In this paper, we evaluate the performance of CDMA_ALOHA scheme, denoted as S_CDMA_ALOHA(Soltted_CDAM_ALOHA) and MS_CDMA_ALOHA(Minislotted_CDMA_ALOHA) system, by analytic and simulation method. The superiority of the CDMA_ALOHA systems over conventional Slotted ALOHA system are clearely demonstrated for throughput, delay and stability performances. The MS_CDMA_ALOHA scheme provides better delay and throughput performance than the S_CDMA_ALOHA scheme.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.263-269
• /
• 2011

In this study, the compositions for the microwave dielectric materials were investigated to obtain the improved dielectric properties, the high temperature stability, and the sintering temperature of less than $900^{\circ}C$, which was necessary for cofiring with the internal conductor of silver. In addition, the dielectric sheets were prepared by the tape casting technique, after which the sheets were laminated and sintered. In this process, the optimum ratio of powder and binder, laminating pressure, temperature, and possibility for cofiring with the internal conductor were studied. Finally, multilayer chip treplexer filter for the 800-2,000 MHz range were fabricated, and the frequency characteristics of the triplexer filter were investigated. When the $0.6TiTe_3O_8-0.4MgTiO_3+3wt%SnO+7wt%H_3BO_3$ ceramics were sintered at $820^{\circ}C$ for 0.3 hours, the microwave dielectric properties of the dielectric constant of 29.91, quality factor of 33,000 GHz, and temperature coefficient of resonant frequency of -2.76 ppm/$^{\circ}C$ were obtained. Using the Advanced Design System (ADS) and High Frequency Structure Simulator (HFSS), the multilayer chip triplexer filter acting at the range of 800-2,000 MHz were simulated and manufactured. The manufactured triplexer filter had the excellent frequency properties in the CDAM800, GPS and PCS frequency regions, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.76-87
• /
• 2000

Multicarrier DS-CDAM is an effective approach to realize wideband CDMA system in a multipath fading channeal. In this paper, we propose a cinvolutionally-coded overlapped multicarrier DS-CDMA system, and show the performance improvement by comparing with conventional multicarrier DS-CDMA system. We consider the case of 50% overlapping with the adjacent subband to utilize the transmission bandwidth more efficiently. In the proposed multicarrier system, each of the rate 1/M convolutionally-encoded symbols is also 1/R repetition coded and transmitted using overlapped multicarriers and we may obtain the coding gain and frequency diversity effect, simultaneously. We also analyze the possibility of reduction in total MUI by considering a raised-cosine wave-shaping filter having a roll-off factor (0< ${\beta}{\le}1$). It will be shown that the proposed system outperforms the multicarrier DS-CDMA system in $^{[3]}$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.304-312
• /
• 2008

Orthogonal codes like Walsh and Golay codes may have large correlation value when they are not synchronized, hence they are seldom used in asynchronous CDMA systems. Wysocki[1] showed that by multiplying the original Walsh-Hadamard matrix with an orthogonal transformation matrix the resultant matrix sustains orthogonality between row vectors and their cross-correlation can be reduced. Soberly and Wysocki[2] proposed similar scheme on Golay codes. This implies that using the proper orthogonal transformation cross-correlation of Walsh and Golay codes can be reduced, and the transformed codes can be used for user separation in the CDAM reverse link. In this paper we discuss cross-correlation related parameters which affect the performance of an asynchronous CDMA link, and we investigate the correlation properties of the transformed codes. When we designed orthogonal transformation matrices for Walsh and Golay codes, we minimized the maximum value of aperiodic cross-correlation of the codes ($ACC_{max}$) or the mean square value of the aperiodic cross-correlation($R_{cc}$) with preserving the orthogonality of the modified codes. We also evaluate the asynchronous CDMA system that uses the transformed Walsh and Golay codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2674-2685
• /
• 1997

In this paper, the design and imprlementation of dual-band power amplifier which is used as a critical part for mobile phone to be simultaneously working at a dual band, 800MHz CDAM and PCS frequency band is described. DC operating point of power FET is limited to Class-B to enable long talk time considering that the tyupical power range of CDMA phones in working is around 10 to Class-B to enable long talk time considering that the typical power range of CDMA phones in working is around 10 to 15dBm, i.e., liner range. The power amplifier which employs two GaAs FETs with good linerity at a low operating point has duplexer cuplexer circuit to separate two frequency bands at input and output stage. Electromagnetic analysis for via holes and coupling between narrow transmission lines is included to design a circuit. Moduld size of 0.96CC($22{\times}14.5{\times}3mm^3$) and maximum module current of 130mA at output power range, 10 to 15dBm are attained. The power amplifer module has achieved ACPR performance with 2 to 3dB marging from IS-95 requirement at output powers, 23.5dBm for PCS and 28dBm for 800MHz CDMA respectively.