• Journal of Mechanical Science and Technology
• /
• v.19 no.6
• /
• pp.1329-1337
• /
• 2005

The OLED (Organic Light Emitting Diodes) display recently used for the information indicating device has many advantages over the LCD (Liquid Crystal Display), and its demand will be increased highly. The linear cell should be designed carefully considering the uniformity of thin film on the substrate. Its design needs to compute the temperature field analytically because the uniformity for the thin film thickness depends on the temperature distribution of the source (organic material). In the present study, the design of the linear cell will be modified or improved on the basis of the temperature profiles obtained for the simplified linear cell. The temperature distributions are numerically calculated through the STAR-CD program, and the grids are generated by means of the ICEM CFD program. As the results of the simplified linear cell, the temperature deviation was shown in the parabolic form among the both ends and the center of the source. In order to reduce the temperature deviation, the configuration of the rectangular ends of the crucible was modified to the circular type. In consequence, the uniform temperature is maintained in the range of about 90 percent length of the source. It is expected that the present methods and results on the temperature analysis can be very useful to manufacture the vapor deposition device.

• Journal of Korean Clinical Nursing Research
• /
• v.15 no.3
• /
• pp.39-48
• /
• 2009

Purpose: The purpose of this study was to examine the effects of a video exercise program on pain, daily living function and educational satisfaction for patients with spinal surgery. Methods: The data were collected from September 2008 to May 2009. The participants were 20 people in the experimental group and 20 in the control group. The video exercise therapy, which was 15 minutes in length, was shown twice a day for 8 weeks using a CD. Results: In the experimental group, pain decreased significantly, and daily living function and educational satisfaction increased significantly compared to the control group. Conclusion: In has been confirmed that video exercise therapy has positive effects on pain, daily living function and educational satisfaction for patients following spinal surgery.

• Archives of Pharmacal Research
• /
• v.26 no.8
• /
• pp.585-590
• /
• 2003

Activity-guided fractionation of the EtOAc-soluble extract of the whole plants of Sida acuta using a bioassay based on the induction of quinone reductase (OR) in cultured Hepa 1c1c7 mouse hepatoma cells, led to the isolation of ten active compounds of previously known structure, quindolinone (1), cryptolepinone (2), 11-methoxyquindoline (3), N-trans-feruloyltyramine (4), vomifoliol (5), loliolide (6), 4-ketopinoresinol (7), scopoletin (8), evofolin-A (9), and evofolin-B (10), along with five inactive compounds of known structure, ferulic acid, sinapic acid, syringic acid, ($\pm$)-syringaresinol, and vanillic acid. These isolates were identified by physical and spectral data measurement. A new derivative of quindolinone, 5,10-dimethylquindolin-11-one (1a) was synthesized and characterized spectroscopically. Of the active substances, compounds 1-3 and 1a exhibited the most potent QR activity, with observed CD (concentration required to double induction) values ranging from 0.01 to 0.12 $\mu$ g/mL. Six compounds were then evaluated in a mouse mammary organ culture assay, with cryptolepinone (2), N-trans-feruloyltyramine (4), and 5,10-dimethylquindolin-11-one (1a) found to exhibit 83.3, 75.0, and 66.7% inhibition of 7,12-dimethylbenz[a]anthracene-induced preneoplastic lesions, respectively, at a dose of 10 $\mu\textrm{g}$/mL.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1221-1224
• /
• 2005

In this paper, by using MPEC-4 systems, it is easy to create MPEC-4 file and to design multimedia which it understands. Also, by using a MPEG-Pro it is proposed that the user understood the data transfer and expression etc. easily and it added the focus processing function it will be able to design and to be possible individual learning which is easy with the CD and web program. The effectiveness of this new multimedia courseware using MPEG-4 have been proven by experiments in practical teaching-learning method of courseware

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.439-439
• /
• 2009

Nowadays, source of MEMS, USN, Hybrid parts pay attention to energy harvesting. On this paper, energy harvesting was studied using piezoelectric effect. And, piezoelectric generator was designed and fabricated. Generators were designed by FEM simulation program and generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Output AC power was rectified to DC power by full bridge circuit and converted to regular voltage power by DC-DC converter. The final output power was charged to Ni-Cd battery. Using fabricated generators, output voltages dependant on thickness of ceramic, displacement of vibration, frequency of vibration were measured.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1-6
• /
• 2004

Lots of researches were gone already about grooving corrosion mechanism of ERW carbon steel pipe. But there is seldom study for water hammer happened by fluid and acceleration of corrosion rate by incresed flow velocity. Therefore, in this study carried out the analysis based on hydrodynamic and fracture mechanics. Analyzed stress that act on a pipe using ANSYS as a program, and also FLUENT and STAR-CD were used for flow phenomenon confirmation. As the result, fatigue failure is happened by water hammer and corrosion rate was increased because of turbulent flow.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.99-100
• /
• 2011

본 논문에서는 CdS센서를 이용하여 장애물의 위치를 판단하고 목적지까지의 최단거리를 계산하여 항체를 주행시키는 시스템에 대해 제안한다. 제안한 시스템은 크게 장애물의 위치를 판단하는 구조물부와 무인항체, 그리고 이것을 관장할 윈도우 기반의 Supervisory program으로 구성된다. 본 논문에서는 제안한 시스템의 S/W와 H/W를 설계하고 구현한 결과를 제시한다.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.693-702
• /
• 1999

We study the characteristics of airflow and sound noise induced by disk rotation in optical disk drives. The characteristics of airflow around a rotating disk surrounded by various tray structures are numerically investigated using a commercial CFD program and then compared with experimental results. Sound pressure and intensity caused by the fluid-structure interactions in the CD/DVD-ROM drive are measured, and the effect of the ariflow on the sound noise and disk vibration is discussed. In order to reduce airflow-induced noise and vibration around the rotating disk, tray geometry is modified. Both numerical and experimental studies implemented with different tray models show that the improved tray model alters the characteristics of the disk-induced airflow, causing the reduction of the airflow-induced sound level.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.231-240
• /
• 1999

The most important thing to be considered in designing stop lamps for automobiles is to satisfy the photometric requirement in various countries and achieve the equal image. To meet these requirements, parabolic reflector and fish-eye optics has been widely applied. The form of the embodied optic is most important in satisfying the photometric requirement and achieving the equal image because the impact of fish-eye optic is decisive. In this study, a series of researches has been performed to optimize of the fish-eye optic by analyzing beam pattern through the photometric simulation based on CATAI program. The optimized results have been shown to meet the various photometric requirements including non dazzling condition considering the following car. The methodology of this study is excepted to influence the development procedure of light system. The time and cost for the system development would be greatly saved by suing this simulaion technique.

• Journal of Welding and Joining
• /
• v.24 no.2
• /
• pp.57-63
• /
• 2006

In this study, the curing kinetics and thermal degradation of underfill were investigated using differential scanning calorimetry (DSC) and thermo gravimetry analysis (TGA). The mechanical and thermal properties of underfill were characterized using dynamic mechanical analysis (DMA) and thermo-mechanical analysis (TMA). Also, we presented on underfill dispensing process using Prostar tool. The non-isothermal DSC scans at various heating rates, the exothermic reaction peak became narrower with increasing the heating rate. The thermal degradation of underfill was composed of two processes, which involved chemical reactions between the degrading polymer and oxygen from the air atmosphere. The results of fluidity phenomena were simulated using Star CD program, the fluidity of the underfills with lower viscosity was faster.