• 한국표면공학회지
• /
• 제48권4호
• /
• pp.174-178
• /
• 2015

We studied emission characteristics for blue fluorescent dual-side emission OLED with Al cathode thickness variation. In the bottom emission OLED of Al cathode with 10, 15, 20, 25, 30, and 150 nm thickness, maximum luminance showed 36.1, 8,130, 9,300, 12,000, 13,000, and $12,890cd/m^2$, and maximum current efficiency showed 2, 8.8, 10, 10.5, 10.8, and 11.4 cd/A, respectively. The emission characteristics of the bottom emission seemed to be improved according to decrease of resistance as the thickness of Al cathode increase. In the top emission OLED of Al cathode with 10, 15, 20, 25, and 30 nm thickness, maximum luminance showed 4.3, 351, 131, 88.6, and $33.2cd/m^2$, and maximum current efficiency showed 0.23, 0.38, 0.21, 0.16, and 0.09 cd/A, respectively. It yielded the highest maximum luminance and maximum current efficiency in Al cathode thickness 15 nm. It showed a tendency to decrease as the thickness of Al cathode increase. The reason for this is due to decrease of transmittance with increasing of Al cathode thickness. The electroluminescent spectra of bottom and top emission OLED were not change.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2959-2962
• /
• 2013

As the concentration of aqueous $CD_3OH$ solutions was decreased, the OD peaks in $^2H$ NMR spectra grew relative to the $CD_3$ peaks. Isotope impurity for OH groups of $CD_3OH$ and deuterium naturally present in water contributed to the OD peaks. Using these peak area data, the site-specific isotope populations of isotope enriched chemicals were measured. In addition, the method using both $^1H$ and $^2H$ NMR spectroscopy was demonstrated with neat $CD_3OH$ to measure the site-specific isotope populations. The results indicate that although it represents only ~0.015% of hydrogen isotopes, the deuterium naturally present in solvents cannot be ignored, especially when the concentration of deuterium-enriched solutes is varied. Proton/deuteron exchange between methyl and methyl/hydroxyl groups was confirmed to be negligible, while that among hydroxyl groups was detectable.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2949-2954
• /
• 2010

Ionic liquid-functionalized ordered mesoporous silica SBA-15 modified carbon paste electrode (CISPE) was fabricated and its electrochemical performance was investigated by cyclic voltammetry, electrochemical impedance spectra. The electrochemical behavior of $Cd^{2+}$, $Pb^{2+}$, $Cu^{2+}$ and $Hg^{2+}$ at CISPE was studied by differential pulse anodic stripping voltammetry (DPASV). Compared with carbon paste electrode, the stripping peak currents had a significant increase at CISPE. Under the optimized conditions, the detection limits were $8.0{\times}10^{-8}\;M$ ($Cd^{2+}$), $4.0{\times}10^{-8}\;M$ ($Pb^{2+}$), $6.0{\times}10^{-8}\;M$ ($Cu^{2+}$), $1.0{\times}10^{-8}\;M$ ($Hg^{2+}$), respectively. Furthermore, the present method was applied to the determination of $Cd^{2+}$, $Pb^{2+}$, $Cu^{2+}$ and $Hg^{2+}$ in water samples and people hair sample.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1225-1228
• /
• 2005

C-terminal fragments of APP (APP-CTs), that contain A$\beta$ sequence, are found in neurotic plaques, neurofibrillary tangles and the cytosol of lymphoblastoid cells obtained from AD patients. CT26, Thr639-Asp664 (TVIVITLVMLKKKQYTSIHH GVVEVD) includes not only the transmembrane domain but also the cytoplasmic domain of APP. This sequence is produced from cleavage of APP by caspase and $\gamma$-secretase. In this study, the solution structure of CT26 was investigated using NMR spectroscopy and circular dichroism (CD) spectropolarimeter in various membrane-mimicking environments. According to CD spectra and the tertiary structure of CT26 determined in TFE-containing aqueous solution, CT26 has an α-helical structure from $Val^{2}\;to\;Lys^{11}$ in TFE-containing aqueous solution. However, according to CD data, CT26 adopts a $\beta$-sheet structure in the SDS micelles and DPC micelles. This result implies that CT26 may have a conformational transition between $\alpha$-helix and $\beta$-sheet structure. This study may provide an insight into the conformational basis of the pathological activity of the C-terminal fragments of APP in the model membrane.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.16-21
• /
• 2001

4원 화합물 반도체인 $Ag_2CdSnSe_4$ 및 $Ag_2CdSnSe_4$:$CO^{2+}$ 단결정을 화학수송법으로 성장시켜 광학적 특성을 조사하였다. 성장된 결정들은 wurtzite 결정구조로서 격자상수는 각각 a = 4.357 $\AA$, c = 7.380 $\AA$($Ag_2CdSnSe_4$:$CO^{2+}$)이었다. 298k에서의 광 흡수 측정으로부터 구한 에너지 띠 간격은 순수한 $Ag_2$CdSnSe의 경우 1.21eV, cobalt 불순물로 첨가한 $Ag_2CdSnSe_4$의 경우 1.02ev이었으며, cobalt를 불순물로 첨가함에 따라 190meV의 에너지 띠 간격의 감소를 보였다. $Ag_2CdSnSe_4$ 결정의 광 흡수 스펙트럼에서 4개의 흡수 피크들을 관측하였으며, 이들 피크 들은 $T_d$결정장내에서 스핀 - 궤도결합효과에 의한 $Co^{2+}$ 이온의 분리된 준위사이의 전자전이에 의한 것으로 설명되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1520-1521
• /
• 2008

There are several ways to demonstrate white organic light emitting diodes (OLEDs) for displays and solid state lighting applications. Among these approaches are the stacked three primary or two complementary colors light-emitting layers, multiple-doped emissive layer, and excimer and exciplex emission [1-10]. We report on white phosphorescent excimer devices by using two light emitting materials based on platinum complexes. These devices showed a peak EQE of 15.7%, with an EQE of 14.5% (17 lm/W) at $500\;cd/m^2$, and a noticeable improvement in both the CIE coordinates (0.381, 0.401) and CRI (81). Devices with the structure ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 12% FPt (10 nm) /26 mCPy: 2% Pt-4 (15 nm)/BCP (40 nm)/CsF/Al [device 1], ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4 (15 nm)/26 mCPy: 12% FPt (10 nm)/BCP (40 nm)/CsF/Al [device 2], and ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4: 12% FPt (25 nm)/BCP (40 nm)/CsF/Al [device 3] were fabricated. In these cases, the emissive layer was either the double-layer of 26 mCPy:12% FPt and 15 nm 26 mCPy: 2% Pt-4, or the single layer of 26mCPy with simultaneous doping of Pt-4 and FPt. Device characterization indicates that the CIE coordinates/CRI of device 2 were (0.341, 0.394)/75, (0.295, 0.365)/70 at 5 V and 7 V, respectively. Significant change in EL spectra with the drive voltage was observed for device 2 indicating a shift in the carrier recombination zone, while relatively stable EL spectra was observed for device 1. This indicates a better charge trapping in Pt-4 doped layers [10]. On the other hand, device 3 having a single light-emitting layer (doped simultaneously) emitted a board spectrum combining emission from the Pt-4 monomer and FPt excimer. Moreover, excellent color stability independent of the drive voltage was observed in this case. The CIE coordinates/CRI at 4 V ($40\;cd/m^2$) and 7 V ($7100\;cd/m^2$) were (0.441, 0.421)/83 and (0.440, 0.427)/81, respectively. A balance in the EL spectra can be further obtained by lowering the doping ratio of FPt. In this regard, devices with FPt concentration of 8% (denoted as device 4) were fabricated and characterized. A shift in the CIE coordinates of device 4 from (0.441, 0.421) to (0.382, 0.401) was observed due to an increase in the emission intensity ratio of Pt-4 monomer to FPt excimer. It is worth noting that the CRI values remained above 80 for such device structure. Moreover, a noticeable stability in the EL spectra with respect to changing bias voltage was measured indicating a uniform region for exciton formation. A summary of device characteristics for all cases discussed above is shown in table 1. The forward light output in each case is approximately $500\;cd/m^2$. Other parameters listed are driving voltage (Bias), current density (J), external quantum efficiency (EQE), power efficiency (P.E.), luminous efficiency (cd/A), and CIE coordinates. To conclude, a highly efficient white phosphorescent excimer-based OLEDs made with two light-emitting platinum complexes and having a simple structure showed improved EL characteristics and color properties. The EQE of these devices at $500\;cd/m^2$ is 14.5% with a corresponding power efficiency of 17 lm/W, CIE coordinates of (0.382, 0.401), and CRI of 81.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.829-838
• /
• 2007

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD).The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}\;cm^{-3},\;345\;cm^2/V{\cdot}s$ at 293 K. respectively. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)\;=\;2.6400\;eV\;-\;(7.721{\times}10^{-4}\;eV/K)T^2/(T+399\;K)$. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd}$, $V_{Se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or accepters. We concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4/GaAs$ did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.

• KSBB Journal
• /
• 제15권6호
• /
• pp.649-657
• /
• 2000

주입법을 이용하여 AOT 역미셀 용액에 가용화된 BSA를 과잉 수용액으로 역추출할 때 효율에 영향을 미치는 요인들 에 대하여 조사하였다. 특히 수용액의 pH, 수용액에 가한 염 의 종류와 농도, 알코올의 종류에 따른 영향을 검토하였다. 더하여, 역추출된 BSA의 CD 스펙트럼을 원래의 BSA의 CD 스펙트럼과 비교하여 추출공정 중에 발생하는 구조적 변화를 결정하였다. KCI이나 NaCI과 같은 1: 1염을 수용액에 첨가하 면 BSA의 등전점 이상의 pH에서는 거의 100% 역추출 효율을 보였다. 이것은 첨가된 염에 의하여 유발되는 역미셀과 단백질 간의 전기적 상호작용의 변화에 기인한 것으로 추측 된다 $CaCl_2$ 과 $MgCl_2$, 와 같은 1:2염의 경우에는 20% 이하의 역추출 효율을 보였다. 1가 염과 2가 염의 경우 각각 pH=7 과 pH=8에서 최고의 효율을 보였다 표면활성시약으로써 알 코올을 침가하는 경우에는 역추출 효율이 향상됨을 보였다. 과잉 수용액으로 추출된 BSA의 CD 스펙트럼으로부터 추출 공정 중에는 특이할 만한 구조적 변성은 관찰되지 않았으며, 특정된 추출조건에서는 원래의 단백질 보다 높은 활성을 보이기도 하였다.

• Mycobiology
• /
• 제45권2호
• /
• pp.73-83
• /
• 2017

The ability of dead cells of endophytic Drechslera hawaiiensis of Morus alba L. grown in heavy metals habitats for bioremoval of cadmium ($Cd^{2+}$), copper ($Cu^{2+}$), and lead ($Pb^{2+}$) in aqueous solution was evaluated under different conditions. Whereas the highest extent of $Cd^{2+}$ and $Cu^{2+}$ removal and uptake occurred at pH 8 as well as $Pb^{2+}$ occurred at neutral pH (6-7) after equilibrium time 10 min. Initial concentration 30 mg/L of $Cd^{+2}$ for 10 min contact time and 50 to 90 mg/L of $Pb^{2+}$ and $Cu^{2+}$ supported the highest biosorption after optimal contact time of 30 min achieved with biomass dose equal to 5 mg of dried died biomass of D. hawaiiensis. The maximum removal of $Cd^{2+}$, $Cu^{2+}$, and $Pb^{2+}$ equal to 100%, 100%, and 99.6% with uptake capacity estimated to be 0.28, 2.33, and 9.63 mg/g from real industrial wastewater, respectively were achieved within 3 hr contact time at pH 7.0, 7.0, and 6.0, respectively by using the dead biomass of D. hawaiiensis compared to 94.7%, 98%, and 99.26% removal with uptake equal to 0.264, 2.3, and 9.58 mg/g of $Cd^{2+}$, $Cu^{2+}$, and $Pb^{2+}$, respectively with the living cells of the strain under the same conditions. The biosorbent was analyzed by Fourier Transformer Infrared Spectroscopy (FT-IR) analysis to identify the various functional groups contributing in the sorption process. From FT-IR spectra analysis, hydroxyl and amides were the major functional groups contributed in biosorption process. It was concluded that endophytic D. hawaiiensis biomass can be used potentially as biosorbent for removing $Cd^{2+}$, $Cu^{2+}$, and $Pb^{2+}$ in aqueous solutions.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.263-263
• /
• 1994

Annexin I is a member of the in family of calcium dependent phospholipid banding proteins and is an in vitro phospholipase $A_2$ (PLA$_2$) inhibitor. The mechanism of PLA$_2$ inhibition by annexin I is still ambiguous. The structure of annexin I was studied at the atomic level by using nuclear magnetic resonance (NMR), circular dichrotsm (CD) and fluorescence spectroscopy. Recombinant human annexin I and N-terminally truncated annexin I (1-31 deleted: d-annexin I) were purified and their NMR spectra were compared. The NMR spectra of the two were similar. When $Ca^{2+}$ ion added to annexin I ad d-annexin I, peak broadening occurred, but no significant spectroscopic change was observed. When porcine pancreatic PLA$_2$ was added to deuterium labeled annexin I, an interaction of annexin I with PLA$_2$ was observed as indicated by the disappearance and shift of several peaks in the NMR spectrum. This result supports a protein-protein interaction mechanism for PLA$_2$ inhibition by annexin I.I.