• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.152-156
• /
• 2014

We report hybrid solar cells fabricated with polymer/fullerene bulk heterojunction layers that contain inorganic nanocrystals synthesized by in-situ reaction in the presence of polymer chains. The inorganic (cadmium sulfide) nanocrystal ($CdS_{NC}$) was generated by the reaction of cadmium acetate and sulfur by varying the reaction time up to 30 min. The synthesized $CdS_{NC}$ showed a rectangular flake shape, while the size of $CdS_{NC}$ reached ca. 150 nm when the reaction time was 10 min. The performance of hybrid solar cells with $CdS_{NC}$ synthesized for 10 min was better than that of a control device, whereas poor performances were measured for other hybrid solar cells with $CdS_{NC}$ synthesized for more than 10 min.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.873-877
• /
• 2004

This study was designed to determine the optimum conditions of three different factors (mixing time, mixing temperature, and tube size) in reduction of cholesterol in milk using immobilized $\beta$-CD beads. Immobilized $\beta$-CD glass beads were prepared at different conditions of silaniza-tion and $\beta$-CD immobilization reactions. In result, the glass beads (diameter 1 mm) at 20 mM 3-isocyanatopropyltriethoxysilane and 30 mM $\beta$-CD without base showed the highest choles-terol removal rate as 41%. Using above immobilized $\beta$-CD glass beads, the cholesterol removal rate was 40.2% with 6 h of mixing time in 7 mm diameter tube at $10^{\circ}C$. After choles-terol removal from milk, the glass beads were washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate was 41%, which was mostly same as that using new glass beads. These results indicated that cholesterol removal rate was about 40% with $\beta$-CD immobilized glass beads, however, the recycling efficiency was almost 100%.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2207-2211
• /
• 2011

Colloidal cadmium telluride (CdTe) quantum dots (QDs) and their nanoparticles have been synthesized by one pot sonochemical reactions under multibubble sonoluminescence (MBSL) conditions, which are quite mild and facile compared to other typical high temperature solution-based methods. For a typical reaction, $CdCl_2$ and tellurium powder with hexadecylamine and trioctylphosphine/trioctylphosphineoxide (TOP/TOPO) as a dispersant were sonicated in toluene solvent at 20 KHz and a power of 220W for 5-40 min at 60 $^{\circ}C$. The sizes of CdTe particles, in a very wide size range from 2 nm-30 ${\mu}m$, were controllable by varying the sonicating and thermal heating conditions. The prepared CdTe QDs show different colors from pale yellow to dark brown and corresponding photoluminescence properties due mainly to the quantum confinement effect. The CdTe nanoparticles of about 20 nm in average were found to have band gap of 1.53 eV, which is the most optimally matched band gap to solar spectrum.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.189-193
• /
• 2012

ZnO nanorods were grown on the $Cd_xZn_{1-x}O$ seed layers with various Cd mole fractions by hydrothermal method. The effects of the Cd mole fraction for $Cd_xZn_{1-x}O$ seed layers on the structural and optical properties of the ZnO nanorods were investigated by scanning electron microscopy, X-ray diffraction, and photoluminescence. The narrowest full-width at half-maximum and largest grain size of the $Cd_xZn_{1-x}O$ seed layers, indicating improvement in crystal quality, were observed at the Cd mole fraction of 0.5. At the Cd mole fraction of 0.5, the largest enhancement in the density, the crystal quality, and the growth rate of the ZnO nanorods was observed while their appearance was not affected significantly by the incorporation of the Cd in the $Cd_xZn_{1-x}O$ seed layers. Consequently, the luminescent properties of the ZnO nanorods were enhanced. The largest improvement in the structural and optical properties of the ZnO nanorods was observed at the Cd mole fraction of 0.5.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.571-575
• /
• 2017

In this study, cadmium telluride (CdTe) quantum dots were synthesized by using ultrasonic irradiation method. Optical properties and structural characteristics of the CdTe quantum dots were analyzed by two main variables; the ratio of the precursor and the synthesis time. As the synthesis time increased, the band gap reduction was observed with the growth of CdTe quantum dots. As for the luminescence properties, the red shift appeared at 510~610 nm wavelength range. Also, it was confirmed that the red shift occurs rapidly as the ratio of Te increases. According to PL peak intensity, the highest intensity was shown at 180 to 240 min. Structural characteristics of CdTe quantum dots were investigated through XRD and TEM, and the cubic zinc blend structure was observed. The size of quantum dots was about 2.5 nm and uniformly dispersed when the synthesis time took 210 min. In addition, the apparent crystallinity was discovered in FFT image.

• Journal of Environmental Health Sciences
• /
• v.38 no.5
• /
• pp.424-430
• /
• 2012

Objective: The purpose of this study was to present the standard deviation of the elemental normalization of concentration of selected heavy metals in the surface sediment of Lake Paldang. Methods: Grain size dependency of selected heavy metal concentrations in the surface sediments of Lake Paldang was analyzed by the extrapolation method. The heavy metal concentrations were the sum of all fractions. Results: Cd and Cu showed an increase of the coefficient of determination($r^2$) in the fractional content of particle size, from <256 ${\mu}m$ to <20 ${\mu}m$, and a decrease from <20 ${\mu}m$ to <1 ${\mu}m$. The normalized concentration of Cd and Cu by extrapolation at 50% <20 ${\mu}m$ were 0.8 mg/kg, 37.0 mg/kg, 57.6 mg/kg and 201.7 mg/kg respectively. Conclusions: The normalized concentrations in the sediment of Lake Paldang are 1.5-2.0 times higher than mean average concentration. We concluded that in interpretation of heavy metal concentration in the sediment of Lake Paldang, normalization of grain size dependency should be considered.

• The Journal of Pediatrics of Korean Medicine
• /
• v.23 no.2
• /
• pp.51-85
• /
• 2009

Objectives : The purpose of this study is to investigate the effect of concurrent administration of KKSDU and AJ on atopic dermatitis in an in-vivo experiment using an NC/Nga atopic dermatitis mouse, which has histological and clinical similarities to the condition in humans. Methods : We evaluated clinical skin score, hematology, serum total IgE and IgG1 of NC/Nga atopic dermatitis mouse and analyzed the cytoline level, total cell number, immunohistochemical staining, histological features of axillary lymph node(ALN), draining lymph node(DLN), peripheral blood mononuclear cells(PBMCs) and dorsal skin tissue in NC/Nga mouse. Results : Orally administration of KKSDU and concurrent administration of KKSDU and AJ decreased the clinical skin score, total cell number of WBC, platelet, neutrophils, eosinophils in blood, serum total IgE & IgG1, IL-5, IL-13. Also, total cell number of ALN and dorsal skin tissue, absolute cell number of CD3e+&CD19+, CD4+&CD8+, CD3+/CCR3+, CCR3+, CD3+/CD69+, CD3+/CXCR5+ in ALN, PBMCs, absolute cell number of CCR3+, CD3+/CD69+, CD11b+/Gr-1+ in dorsal skin tissue, Eotaxin2 mRNA, CCR3 mRNA in dorsal skin tissue and gene expression of IL-5 mRNA, IL-13 mRNA in ALN are significantly decreased. Furthermore, thickness of epidermis, infiltrated inflammatory immune cell & mast cell in dermis, histologic infiltration of mast cell, the size of inflammatory lymphocytes cells & plasma cells in ALN and histologic infiltration of CD4+ & CCR3+ in ALN and dorsal skin tissue are significantly decreased. However, total cell number of DLN, absolute cell number of CD3+&CD19+, CD4+&CD8+, B220+/CD23+, CD3+/CD69+ in DLN and CD4+CD25+foxp3+Treg cell, foxp3 mRNA in dersal skin tissue are increased significantly. Conclusions : Concurrent administration of KKSDU and AJ on atopic dermatitis in an in-vivo experiment using an NC/Nga atopic dermatitis mouse was very effective to the atopic detmatitis treatment.

• Advances in nano research
• /
• v.1 no.2
• /
• pp.83-91
• /
• 2013

The synthesis of semiconductor nanoparticles is a growing research area due to the prospective applications for the development of novel technologies. In this paper we have reported the biosynthesis of Cadmium sulfide nanoparticles (CdSNPs) by reduction of cadmium sulphate solution, using the bacteria of Serratia nematodiphila. The process for the synthesis of CdS nanoparticles is fast, novel and ecofriently. Formation of the CdS nanoparticles was confirmed by surface Plasmon spectra using UV-Vis spectrophotometer and absorbance strong peak at 420 nm. The morphology of crystalline phase of nanoparticles was determined from Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy and X-ray diffraction (XRD) spectra. The average size of CdS nanoparticles was in the range of 12 nm and the observed morphology was spherical. The results indicated that the proteins, which contain amine groups, played a reducing and controlling responsibility during the formation of CdS nanoparticles in the colloidal solution. Antibacterial activity against some bacteria such as Bacillus subtilis, Klebsiella planticola. CdS nanoparticles exhibiting good bactericidal activity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1202-1209
• /
• 2004

This paper presents a design methodology of a Digital Servo Signal Processor for high speed CD-RW drive systems. The proposed Digital Servo Signal Processor enables us to develop CD-related systems for the very high speed applications and is one of the key components of the CD-RW systems. The proposed center compensation servo control is newly built for an actuator shaking due to the fast response of a step motor when it jumps to a long distance. A control method compensating for eccentricity of a disc is implemented for operating robustly at a higher rotational speed. This servo mechanism is more size efficient and less power consumed because it is implemented using a ARM7 embedded processor and hardware digital filters. Furthermore, it is convenient to upgrade firmware for the future required functions. From experimental results, we can see that the performance of the control system is improved greatly. The proposed servo algorithm shows a shorter setting time including a pull-in time and a faster access time. It can be applied easily to the DVD-ROM and the DVD-RAM which have the same optical structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.484-484
• /
• 2013

기존 진단용 Digital X-ray Detector이 직접방식에서는 a-Se (Amorphous Selenium)이 대중화되었지만 고전압을 인가하여야한다는 점과 그로 인한 물질 자체의 Life time 감소 등 여러 단점들 때문에 기타 후보물질들로 HgI2, PbI2, PbO, CdTe, CdZnTe가 연구 되고 있다. 이러한 후보 물질들 중 본 연구에서는 PVD (Physical Vapor Deposition)방식을 이용하여 Polycrystalline CdTe 박막을 제작하고 특성 향상을 위해 유전물질을 Passive layer와 Protect layer로써 증착하였다. 또한 유전체층의 위치에 따른 특성 분석을 위해 제작된 박막은 FE-SEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction)을 통해 구조적인 특성을 확인하였다. 그리고 입사되는 X-ray 선량에 의해 생성되는 전기적 특성을 분석하였다, 그 결과 박막의 Grain Size는 약 $5{\mu}M$이며 (111)방향의 주 peak를 띄는 Poly CdTe형태로 증착된 것을 확인하였다. 전기적인 신호 결과 Passive layer와 Protect layer를 증착한 박막 모두 Darkcurrent가 감소된 것을 확인하였다. 또한 Sensitivity 측정 결과 Passive layer를 삽입한 경우 신호 값이 감소하였으며 Protect layer를 삽입한 경우 신호 값의 변화가 일어나지 않았다. 그러므로 Protect layer를 등착한 박막의 경우 SNR이 현저히 높아지는 결과를 낳았다.