• The Journal of the Korea institute of electronic communication sciences
• /
• 제10권6호
• /
• pp.749-756
• /
• 2015

In this paper, we propose a unique systolic structure and communication algorithm that maintains a solid link between nodes using synchronous digital communication and enables low power communication. This system was designed by using CC2500 RF transceiver, CC2590 RF front end and C8051F330 low power microcontroller. The measurement of power consumption in the network link shows below $400{\mu}W$ in data transfer rate 320bps. The system constitutes the base unit of low power wireless network that was composed of each seven link nodes having eight sensor nodes. Results of the experiments show that link nodes using a 4Ah battery could operate over 3 years without replacement.

• Journal of Multimedia Information System
• /
• 제5권2호
• /
• pp.91-98
• /
• 2018

We devised a bird-borne transceiver unit for S-band packet radio communications based on the CC2500 transceiver, a device manufactured by Texas Instruments (TI). Our assessments determined the optimal parameters needed to achieve successful bird-to-center communication over a distance of 18 km and bird-to-bird communication over a distance of 200 m. These parameters included optimal modulation methods, transmission rates, and antennas. We equipped the transceiver unit with a modified dipole antenna (collinear antenna), which we tested in a 10 m anechoic chamber. Our experimental assessments and circuit design review identified the following parameters: 2FSK modulation method; 14.28 kHz frequency shift; 101.56 kHz IF reception bandwidth; and Manchester encoding (+). Our assessments showed bird-to-bird communications could be achieved over a distance of 200 m assuming MSK, FEC (+), and 500 kbps. Following tests by an official body, we obtained 28 sets of a type approval license for 2.4 GHz. In cooperation with the Yamashina Institute for Ornithology, we attempted to tag and release six or more swans. This unit gives us the ability to obtain vital data on swans. We expect this data to provide significant benefits, including clues on improving screening for infected individuals.

• Journal of KIISE:Information Networking
• /
• 제37권3호
• /
• pp.217-227
• /
• 2010

To apply active RFID technology in the various kinds of industry, it needs to quickly transmit a large amount of data. ISO/IEC 18000-7 standard uses the 433.92MHz as single channel system and its transmit rate is just 27.8kbps, that is insufficient for a large amount of data transmission. To solve this problem, we designed a new data transmission protocol using 2.4GHz band. The feature of designed protocol is not only making over 255bytes data messages using the Burst Read UDB but also efficiently transmitting it. To implement this protocol, we use Texas Instruments's SmartRF04 develop kit and CC2500 transceiver as RF module. As an evaluation of 63.75kbytes data transmission, we demonstrate that transmission time of Burst Read UDB has improved as 17.95% faster than that of Read UDB in the ISO/IEC 18000-7.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제10권11호
• /
• pp.1265-1270
• /
• 2015

For the sensor node or collection node operating with a battery in a wireless sensor network, MAC protocols with improved energy efficiency are important performance factors. In this paper, in order to improve the restrictive capability in accordance with the fixed activity period of the duty cycle technology in the MAC protocol for wireless sensor networks, we propose a periodic adaptive wakeup technique based on receive prediction. The proposed technique is through a performance evaluation using the CC2500 RF transceiver and C8051F330 microcontroller based wireless node, to analyze the minimum active period. As a result, it was confirmed that it is possible to improve energy efficiency by adaptively changing the sleep period in accordance with the change of period.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.139-142
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the information and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. However, ISO/IEC 18000-7 as active RFID standard has a problem which cannot use multiple channel. To solve this problem, we use the 2.4GHz bandwidth technology and we propose the dynamic channel allocation method which can efficiently allot a channel. we show the operation of the dynamic channel allocation method through design and implement with CC2500DK of Taxas Instrument.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제9권6호
• /
• pp.1768-1774
• /
• 2008

The particulate behaviors of nickel ferrite were investigated under the simulated PWR shutdown chemistry conditions. Temperature of the simulated water with concentration of 0.1 ppm Li and 2,000 ppm B was dropped from $300^{\circ}C$ to $150^{\circ}C$ with a rate of $0.625^{\circ}C/min$ and then constantly maintained at $150^{\circ}C$ under the pressure of 2,500 psi. The on-line particle counting and the concentration measurement of nickel dissolved were performed under 5, 15 and 25 cc/kg $H_2O$ dissolved hydrogen. Experimental results showed that total particle count in the simulated water was not greatly changed for three hydrogen concentrations as temperature was decreased. However, particles were smaller as temperature was decreased and then maintained constantly. The degree of variation in particle size distribution was greater at 15 cc/kg $H_2O$ dissolved hydrogen than any other dissolved hydrogen concentrations. Concentration of nickel ion was increased as temperature was decreased and was higher at 15 cc/kg $H_2O$ dissolved hydrogen than any other dissolved hydrogen concentrations. Theses results show that nickel ferrite is unstable with temperature variation and at dissolved hydrogen concentration of 15 cc/kg $H_2O$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제24권5호
• /
• pp.385-390
• /
• 2012

This paper discusses the applicability of a compact rolling piston refrigeration compressor to portable refrigerators. The capacity of this compressor is 1 cc. Using a 12 V BLDC motor, the compressor is driven from 2500 rpm to 6000 rpm. The height of the compression module and motor is approximately 56 mm, and their weight is approximately 374 g. We confirmed the effective operation of the compressor components by evaluating their compression and cooling performance.

• 전자공학회논문지 IE
• /
• 제49권1호
• /
• pp.12-17
• /
• 2012

Fast development of ubiquitous technology prompted the broadening of the related application area. Application of ubiquitous techniques and system into the construction sites may give us many benefits. There are always a lot of hazard situations in construction sites, and the falling is known to have the high accident rate. To prevent the falling, there has been a lot of efforts including safety education and use of safety gears. In this study, we designed, fabricated and tested a system that can monitor the worker's safety and location informations in real time by using the wireless technology of TOA and RSSI. We used ATmegal28 that is popular in the industrial equipments as MCU and NanoPan 5357 module from Nanotron and CC2500 chipset from TI for radio circuits. We also used 3-axis accelerometer and pressure MEMS sensors to obtain the environmental information, and therefore to aquire the informations of the worker's movement and altitude. We used Labview software from National Instrument to monitor and control the system. We developed the system to send the warning alarms to the server operator and the workers when the workers in the danger zone did not wear the safety hook.

• 전자공학회논문지 IE
• /
• 제47권3호
• /
• pp.19-25
• /
• 2010

We developed a RFID terminal to voice guide the blind who have difficulties in reaching out to the pharmaceutical information. In this work, we used RFID technology to instruct the pharmaceutical information to the blind. The voice guidance reader was made to read the RFID tag attached to the drugs and announced the pharmaceutical information matching to the tag specific ID. We had the reader to obtain the pharmaceutical information from the ezDrug site operated by Korea Food & Drug Association. The voice guidance reader was fabricated as necklace type for the easy carry, and we added mp3 player as dual uses. ARM series Cortex M3 chip was used for the reader's core chip and low power MFRC523 chipset of NXP was used to construct RFID circuit. MFRC523 chip uses low power to meet the mobile application. We used VS1003B MP3 Decoder IC to make the voice generation circuit and CC2500 chipset for the wireless communication to the pharmaceutical information server. We also developed the system that can support ISO 14443A type and ISO 14443B type so that the system can be used to extend to various RFID protocols. Utilization of this system can conveniently convey the pharmaceutical information to the blind and reduce the drug abuse.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• 제4권1호
• /
• pp.111-129
• /
• 1998

In order to research the effect of Sipjundaebotang on the immune respons of CD4+ T cell and CD8+ T cell in rats, author have performed this experimental study. Experimental groups are divided into 5 groups(intact, control, sample I, sample II, sample III). Normal group was intact, control group was administrated normal saline 2cc for 5 days, sample I was administrated low concentration of Sipjundaebotang(100/3100pack/ml) 2cc for 5 days, sample II was administrated middle concentration of Sipjundaebotang(500/3100pack/ml) 2cc for 5 days, sample III was administrated high concentration of Sipjundaebotang(2500/3100pack/ml) 2cc for 5 days. WBC, Lymphocyte, CD4+ T cell in the blood, spleen, axillary node and CD8+ T cell in the blood, spleen and axillary node were determined. The results was as follows: 1. WBC count in blood was significantly decrcased in the control, sample I, II, III groups as compared with the normal group. 2. Lymhocyte count in the blood was significantly decreased in the control, sample I, II groups as compared with the normal group. 3. CD4+ T cell count in the blood was significantly increased dose-dependently in the sample I, II, III groups as compared with the normal group. 4. CD4+ T cell count in the spleen was significantly increased in the sample I, II, III groups as compared with the normal group. 5. CD4+ T cell count in the axillary node was significantly increased in the sample III group as compared with the normal group, however significantly decreased in the sample I, II groups as compared with the normal group. 6. CD8+ T cell count in the blood was significantly increased in the sample III groups as compared with the normal group. 7. CD8+ T cell count in the spleen was significantly increased in the sample I, II, III groups as compared with the normal group. but there was no differences in the sample groups. 8. CD8+ T cell count in the axillary node was decreased in the sample I, II groups as compared with the normal group.