• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.28-32
• /
• 2008

In this paper CdS thin films, which were widely used window layer of the CdS/CdTe and the CdS/$CuInSe_2$ heterojunction solar cell, were grown by chemical bath deposition, which is a very attractive method for low-cost and large-area solar cells, and the structural, optical and electrical properties of the films was studied. As the thiourea/$CdAc_2$ mole ratio was increased, the deposition rate of CdS films prepared by CBD was increased due to increasing reaction velocity in solution and the optical bandgap was increased at higher thiourea/$CdAc_2$ mole ratio due to larger grain size and continuous microstructure. The minimum resistivity of the films was at thiourea/$CdAc_2$ mole ratio of 3.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.89-94
• /
• 2001

The binding of cellobiohydrolases to cullulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding changes during hydrolysis is still needed. The adsorption of purified two cellobiohydrolases (Ce17A and Ce16A) from Trichoderma reesei cellulase to microcrystalline cellulose has been studied. Cellobiohydrolase II (Ce16A) does not affect the adsorption of cellobiohydrolase I (Ce17A) significantly, and there are specific binding sites for both Ce17A and Ce16A. The adsorption affinity and tightness of the cullulase binding domain (CBD) for Ce17A are larger than those of the CBD for Ce16A. The CBD for Ce17A binds more rapidly and tightly to Avicel than the CBD for Ce16A. The decrease in adsorption observed when the two cellobihydrolases are studied together would appear to be the result of competition for binding sites on the cellulose. Ce17A competes more efficiently for binding sites than Ce16A. Competition for binding sites is the dominating factor when the two enzymes are acting together, furthermore adsorption to sites specific for Ce17A and Ce16A, also contributes to the total adsorption.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2006

QFD(Quality Function Deployment) is a system for translating specific customer needs into detailed product requirements which are deployed throughout design, production, marketing and support operations. QFD is a team tool. However, most of commercial QFD softwares are standalone and therefore offer limited support for teamwork. In this paper, we developed a web-based QFD software to overcome many of the limitations that standalone systems suffer from. That is, this software was developed for synchronizing collaboration between team members distributed not only geographically but also over time. This software was developed by using Visual studio.NET and Microsoft COM+(CBD) technique and can be implemented on the web browser.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.65-74
• /
• 2002

The CBD(component based development) method has recently been on the rise as the main current among all fields of developing Information Systems. The developing system by building and integrating of components is encouraged in GIS sphere. Business domain which considerably identifies components occupies GIS shpere rather then any other sphere. Arithmetic function is quite needed in GIS sphere but non-arithmetic functions are also used in GIS sphere as well as in enterprise sphere. Component is characterized by ensuring the reuse of itself. The efficiency of reusing component is promoted as the component is functionally simple and is packed to a minimum. The GIS Component Extraction Method has already been presented in several studies but this study is about the GIS Component Extraction by the Affinity Analysis Method. CBD uses UML on a basis and the core of the UML is consisted of the use case and the class. The purpose of the Affinity Analysis is a study how relate between the use case and the class in a certain business domain and then the results identify the component. The Affinity Analysis is useful not only in GIS but also in every business domain and is considered to be popular as the procedure of this method is not complex at all.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.39-53
• /
• 2013

Although the efficient formation of urban space structure is a key factor in energy saving and environmentally-friendly aspect, the maintenance of the center and sub-center of the city that are key factors has been becoming increasingly difficult due to the variability and complexity of urban activities. In the case of Busan, amid the expansion of urban scale due to rapid economic development and overpopulation, systematic approaches to professional diagnosis and maintenance have been significantly insufficient - other than the city basic plan which has been conducted at an interval of 20 years. For the effective management of urban central area, systematic monitoring of the CBD through demand forecast and blight forecast at a city level must first be implemented. In order to fulfill this goal, this study is to figure out the current state of the CBD through the diagnosis on blight of the urban central area in the viewpoint of rehabilitation of the CBD and to propose the measures for practical utilization of the information about space for the further management of the central area of the city. For analysis, the study looks into the present state in terms of physical index, economic index, and social index. And then as a micro-approach by utilizing economic index, the study has thoroughly examined the economic blight of the Seomyun urban central area of Busan. The outcome of the analysis shows that in terms of population distribution and land utilization the area is in the stage of inefficient dispersion after having gone through the stage of suburbanization. It is expected that this study, as the material that proves the necessity of enhancing the function of the CBD, can propose the direction for the management of the urban center of Busan through blight prediction and management of the urban center and can provide the basic data for the long-term urban development that aims at the efficient strengthening of functions of the CBD.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.57-67
• /
• 2008

Loading zone is necessary to central business district(CBD) due to freight trucks coming into inner city. Currently truck drivers in metropolitan area are forced to illegally park their freight trucks on the roads close to the business facilities because there is no or few loading zones available in the CBD. This situation would bring into traffic congestion and even might block local roads in the CBD. This study reviews the existing improvement plans in city logistics, and examines delivery characteristics related to freight trucks and drivers in Seomyeon, the central downtown of Busan. Also it conducts a location planning for on-street loading/unloading bay using a technical method for arranging loading space. This research estimated the number of parking and stop bays for truck's operation using queueing theory based on truck-service rate and arrival rate, and found locations with the minimum resistance function values for freight movement in arranging on-street loading/unloading bays.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.7
• /
• pp.282-287
• /
• 2007

Information society is dramatically developing in the various areas of finance, trade, medical service, energy, and education using information system. Evaluation for risk analysis should be done before security management for information system and security risk analysis is the best method to safely prevent it from occurrence, solving weaknesses of information security service. In this paper, Modeling it did the evaluation-base CBD function it will be able to establish the evaluation plan of optimum. Evaluation-based CBD(case-based reasoning) functions manages a security risk analysis evaluation at project unit. it evaluate the evaluation instance for beginning of history degree of existing. It seeks the evaluation instance which is similar and Result security risk analysis evaluation of optimum about under using planning.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.513-522
• /
• 2008

Service-Oriented Architecture(SOA) is an method to develop applications by developing and publishing reusable services which potentially be used in various applications, and discovering and composing right services dynamically. SOA adopts a paradigm of publish-discover-invoke, which is considerably different from object-oriented and component-based development(CBD) approaches. The service in SOA is different from function in procedural programming, object in object-oriented programming, and component in CBD, and its fundamental requirement is a high level of reusability and applicability. In SOA, service providers and service consumers are loosely coupled since the providers try to develop reusable services and the consumers try to locate right services without knowing much about the providers and their published services. Moreover, the process of searching, choosing and invoking right services is not presented in conventional programming paradigms. Therefore, conventional approaches to developing user interfaces and invoking the functionality on servers through JSP, and RMI in object-oriented programming cannot well be applicable to designing clients’ programs in SOA. Therefore, there is a high demand for a practical and systematic process for developing clients’ applications, and the such a process should be devised by considering key characteristics of services and SOA. However, little work on this area is known to date, and there has not a process for client side just except few guide lines for developing service client. In this paper, we propose a practical and systematic development process for developing clients' applications in SOA. Then, we define instructions for carrying out each activity in the process. To show the applicability of the proposed work, we show the result of applying our process in developing a services application for searching and booking hotels.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.383-390
• /
• 2002

System developments by components are accomplished by creating new software based on independent components having respective function. Generally, component-based software developments are expected to obtain profits caused by reuse of software, such as improvement of quality, rapid development, and efficiency of maintenance. In a component-based system, the most important goal and also key to success is to identify and construct high quality components that may increase reusability. Therefore, it is necessary for component developers to understand strong and weak points of existing component development methodologies in the aspect of identification of component, and to select the most appropriate methodology for the system to be constructed. It is also necessary for component developers to develop a new methodology enabling effective identification of independent components through modification and/or complementation of existing methodologies. The modification and complementation needs comparison and analysis of various existing methodologies. Accordingly, the this paper is to provide explanation for some widely used methodologies representing the existing component-based software development methodologies such as RUP(Rational Unified Process) of Rational company［1,9］, CBD96 of Computer Associates company［2,3］, UNIFACE of Compuware company［5］, and UML components methodology derived from extending of the component developing method of CBD96 by Cheesman and Daniels［4］. The this paper is also to point out respective problems of the representative existing methodologies. Furthermore, component identification methodologies are compared and analyzedon the whole through this paper.