• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.41-52
• /
• 2020

Purpose: To find out the dosimetric usefulness, setup reproducibility and efficiency of applying 3D Bolus by comparing two treatment plans in which Commercial Bolus and 3D Bolus produced by 3D Printing Technology were applied to the neck during VMAT treatment of Hypopahrynx Cancer to evaluate the clinical applicability. Materials and Methods: Based on the CT image of the RANDO phantom to which CB was applied, 3D Bolus were fabricated in the same form. 3D Bolus was printed with a polyurethane acrylate resin with a density of 1.2g/㎤ through the SLA technique using OMG SLA 660 Printer and MaterializeMagics software. Based on two CT images using CB and 3D Bolus, a treatment plan was established assuming VMAT treatment of Hypopharynx Cancer. CBCT images were obtained for each of the two established treatment plans 18 times, and the treatment efficiency was evaluated by measuring the setup time each time. Based on the obtained CBCT image, the adaptive plan was performed through Pinnacle, a computerized treatment planning system, to evaluate target, normal organ dose evaluation, and changes in bolus volume. Results: The setup time for each treatment plan was reduced by an average of 28 sec in the 3D Bolus treatment plan compared to the CB treatment plan. The Bolus Volume change during the pretreatment period was 86.1±2.70㎤ in 83.9㎤ of CB Initial Plan and 99.8±0.46㎤ in 92.2㎤ of 3D Bolus Initial Plan. The change in CTV Min Value was 167.4±19.38cGy in CB Initial Plan 191.6cGy and 149.5±18.27cGy in 3D Bolus Initial Plan 167.3cGy. The change in CTV Mean Value was 228.3±0.38cGy in CB Initial Plan 227.1cGy and 227.7±0.30cGy in 3D Bolus Initial Plan 225.9cGy. The change in PTV Min Value was 74.9±19.47cGy in CB Initial Plan 128.5cGy and 83.2±12.92cGy in 3D Bolus Initial Plan 139.9cGy. The change in PTV Mean Value was 226.2±0.83cGy in CB Initial Plan 225.4cGy and 225.8±0.33cGy in 3D Bolus Initial Plan 224.1cGy. The maximum value for the normal organ spinal cord was the same as 135.6cGy on average each time. Conclusion: From the experimental results of this paper, it was found that the application of 3D Bolus to the irregular body surface is more dosimetrically useful than the application of Commercial Bolus, and the setup reproducibility and efficiency are excellent. If further case studies along with research on the diversity of 3D printing materials are conducted in the future, the application of 3D Bolus in the field of radiation therapy is expected to proceed more actively.

• Reproductive and Developmental Biology
• /
• v.31 no.2
• /
• pp.109-113
• /
• 2007

This study was conducted to evaluate the effect of cytochalasin B (CB) treatment in the activation medium on the development of somatic cell nuclear transfer (SCNT) rat embryos. Fetal fibroblast cells were isolated from a Day 14.5 fetus, and the oocytes for recipient cytoplasm were recovered from 4-week old Sprague Dawley rats. After enucleation and nuclear injection, the reconstructed oocytes were immediately exposed to activation medium consisting of 10 mM $SrCl_2$ with or without CB for 4 hr, and formation of pseudo-pronucleus (PPN) was checked at 18 hr after activation. Then, they were transferred into day 1 pseudopregnant recipients (Hooded Wistar) or cultured for 5 days to check their developmental competence in vivo or in vitro. The number of PPN was not affected by CB treatment during the activation. However, CB treatment supported pre-implantation development of rat SCNT embryos. Embryos generated by the procedures of SCNT were also capable of implanting, with 1 implantation scar found from a recipient following the transfer of 87 SCNT embryos to four foster mothers. The result of the present study shows that rat SCNT embryo can develop to post-implantation stage following treatment with CB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1209-1215
• /
• 2010

The effects of multi-walled carbon nanotube (MWCNT) content, carbon black (CB) content, atmospheric-pressure flame plasma (APFP) treatment, and acid treatment on the mechanical properties of elastomeric composites were investigated. For pure or filled rubbers with the given amount of CB (20 and 40 phr), the tensile strength and modulus of the elastomeric composites increase similarly with the MWCNT content. A composite with APFP-treated MWCNTs shows a hardening effect (high strength, high modulus, and high ductility) unlike the one with untreated MWCNTs. On the other hand, a composite with APFP-treated CB shows a softening effect (high strength, low modulus, and high ductility), which is unlike a composite with untreated CB. As the refluxing time increases from 1 h to 2 h and the sulfuric acid concentration increases from 60% to 90%, the tensile strength and modulus of a composite decrease. Thus, it is found that the MWCNT content, CB content, APFP treatment, sulfuric acid concentration, and refluxing time have an important effect on the mechanical properties of NBR composites.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.979-983
• /
• 2012

Background : Previous studies have suggested a lack of complete cross-resistance between steroidal (exemestane) and non-steroidal aromatase inhibitors (nSAI). Methods : Eighty-eight metastatic breast cancer (MBC) patients who received 25 mg of exemestane orally once a day at the National Cancer Center, Korea, between 2003 and 2009, were reviewed retrospectively. All patients had received nSAI for metastatic disease prior to exemestane therapy. Results : The median age was 52 years (range, 33-79), and 13 (14.8%) patients were premenopausal who concomitantly received GnRH agonist. Exemestane was given as a second- (80.7%) or third-line (19.3%) hormone therapy. The clinical benefit (CB) rate (complete response + partial response + stable disease ${\geq}$ 24 weeks) was 30.7%, with a median CB duration of 10.0 months (range, 6.3-78.7). The median progression-free survival (PFS) was 3.0 months (95% confidence interval [CI], 1.99-4.01) and the overall survival (OS) 21.5 months (95% CI, 17.96-25.04), with a median followup of 50.3 months. Patients who achieved CB had longer OS than those patients who did not (29.6 vs 17.9 months; P=0.002). On univariate analysis of predictive factors, patients who had achieved CB from previous nSAI tended to show lower CB rate (24.6% vs 44.4%, respectively; P=0.063) and shorter PFS (2.8 vs 4.8 months, respectively; p=0.233) than patients who had not. Achieving CB from previous nSAI became independent predictive factor for CBR to exemestane on multivariable analysis (Odds ratio = 2.852, P = 0.040). Conclusions : Exemestane after nSAI failure was effective in prolonging CB duration. The drug's efficacy seemed to be inferior in patients who had benefit from previous nSAI use.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.6
• /
• pp.584-591
• /
• 2003

The objective of this study is to develope natural and economical Naengmyun broth using stock prepared with chicken heads. Proper mixing ratio of chicken head stock and chicken breast broth was determined through the sensory evaluation. In order to find out the attributes of chicken head-chicken breast broth(CH-CB broth), chicken breast broth and beef brisket(BB) broth were mixed to the chicken head stock and compared the preference and chemical elements between the broths were compared. The appropriate mixing ratio for reinforcing the meat broth and savory flavor, of was determined to 3:7(w:w). The comparison of CH-CB broth's and CH-BB broth's elements showed that the amount of crude protein and ash was the same and, in the case of crude lipid, CH-BB broth had 0.01% more than CH-CB broth. In the case of the total amount of free amino acids, CH-CB broth had 1.6 times more than CH-BB broth. A survey with 50 consumers showed that was prefered between CH-CB broth and CH-BB broth. CH-CB broth with significance.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.21-32
• /
• 2011

The effects of high polymer on the seedling survival were investigated in three major turfgrasses. Twelve treatments were used in the study with different rates of sand, soil organic amendment (SOA), and water-swelling polymer (WSP). Turfgrass seedling survival rate was evaluated in creeping bentgrass (CB), Kentucky bluegrass (KB), and zoysiagrass (Zoy) grown under greenhouse conditions. Significant differences were observed among the treatments. Seedling survival rates were variable in CB, KB, and Zoy according to mixing rates of SOA and WSP, being maximum 20.2% in differences. At 6 weeks after seeding, the survival rates ranged from 0.6 to 61.9% in CB, 4.2 to 75.3% in KB and 1.7 to 82.1% in Zoy. A pattern of seedling emergence varied with time among treatments influenced by WSP rates. A proper mixing rate of WSP is considered to be 5% for CB and 5 to 10% for KB and Zoy. In general, overall effect of WSP on seedling survival was clearly observed in the mixtures of sand 80% and SOA 20% in CB. The best result, however, was found from the mixture of sand 85% and SOA 15% in both KB and Zoy. When mixing sand with WSP, a proper rate of SOA is considered to be 20% for CB and 15 to 20% for KB, while 10 to 15% for Zoy. A further research is needed to investigate the effects of WSP on the turf quality in mixtures of sand, SOA, and WSP before a field application.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.12
• /
• pp.1665-1671
• /
• 2009

Anaerobic digestion sludge was cultivated in an electrochemical bioreactor (ECB) to enrich the hydrogenotrophic methanogens. A modified graphite felt cathode with neutral red (NR-cathode) was charged with electrochemical reducing power generated from a solar cell. The methane and carbon dioxide collected in a Teflon bag from the ECB were more than 80 ml/l of reactant/day and less than 20 ml/l of reactant/day, respectively, whereas the methane and carbon dioxide collected from a conventional bioreactor (CB) was around 40 ml/l of reactant/day, respectively. Moreover, the maximal volume ratios of methane to carbon dioxide (M/C ratio) collected in the Teflon bag from the ECB and CB were 7 and 1, respectively. The most predominant methanogens isolated from the CB on the $20^{th}$, $80^{th}$, and $150^{th}$ days of incubation were hydrogenotrophs. The methanogenic diversity analyzed by temperature gradient gel electrophoresis (TGGE) of the 16S rDNA variable region was higher in the ECB than in the CB. The DNA extracted from the TGGE bands was more than 95% homologous with hydrogenotrophic methanogens in the ECB, but was an aceticlastic methanogen in the CB. In conclusion, the ECB was demonstrated as a useful system for enriching hydrogenotrophic methanogens and increasing the M/C ratio of the gas product.

• Korean Journal of Human Ecology
• /
• v.17 no.2
• /
• pp.255-269
• /
• 2008

The study is to investigate how much middle-aged male worker's life stress affect their psychological well-being. The subject group was 223 male workers aged from 40 to 59 with a wife and children. The results are as follows: 1) the middle-aged male workers perceive an economic life stress as a most stressful problem, and mostly use a 'direct-positive' coping behavior(CB) type to settle the stress among 4 stress CB types. 2) Economic life and marital stress, 'indirect-active' and 'direct-active' CB give deep effects on their life satisfaction. 3) The effecting factors on their depression are work stress, marital stress, health stress, a 'direct-passive', an 'indirect-active', an 'indirect-passive' CB and their income. In order to increase their life satisfaction and to decrease their depression, concludingly, it is most significant for them to have a strong marital relationship and actively cope with life stress.

• Carbon letters
• /
• v.2 no.3_4
• /
• pp.159-164
• /
• 2001

In this study, the effects of carbon black (CB) content and anodic oxidation treatment with $AgNO_3$ on positive temperature coefficient (PTC) behavior of CB/HDPE nanocomposites were investigated. Also, the addition of elastomer as a toughing agent was studied. The 20~50 wt% of CB, 0~5 wtt% of elastomer, and 1 wt% of $AgNO_3$-filled HDPE nanocomposites were prepared using the internal mixer in 60 rpm at $160{\circ}C$ and the compression-molded at $180{\circ}C$ for 10 min. As a result, the room temperature resistivity and PTC intensity of the composites were dependent, to a large extent, on the content of CB, addition of elastomer, and surface chemical properties that were controlled in the relative arrangements of the carbon black aggregates in a polymeric matrix. Moreover, the composites with relatively low room temperature resistivity and suitable PTC intensity could be achieved by treatment of $AgNO_3$. Consequently, it was noted that PTC effect was due to the deagglomeration or the breakage of the conductive networks caused by thermal expansion or crystalline melting of the polymeric matrix.

• Journal of Periodontal and Implant Science
• /
• v.23 no.2
• /
• pp.352-357
• /
• 1993

The purpose of the present study was to evaluate and compare the periodontal conditions of distally extending cantilever bridges(CB) and removable patial dentures(RPD). 78 patients treated with removable partial dentures were divided into 2 groups; bilateral free-ending (type 1) and unilateral free-ending(type 2). 43 patients treated with distally extending cantilever bridges were divided into 4 groups according to position of missing molars and number of including abutment tooth (or teeth) (type 1-4). Prosthodontic status of the abutment teeth were assessed; overcontoured crown, overhanged margin, embrasure closure, and others. Their Periodonted status were assessed with Plaque Index Gingial Index(GI) Sulcus bleedy Index (SBI), Tooth mobility(TM) & Posher depth(PPD). 35.9% of RPD group and 38.1 of CB grouphad disconfort on mastication with prosthetics. 16.7% of RPD group and 6.1% of CB group showed on opposing sites. Overhanged margins were 58.3% for RPD group and 86.6% for GB group. 45.5% of RPD group and 72% of CB group had embrasure closure on the abutment teeth. 30.5% of GB group had oversized pontic. Gb group showed much higher clinical parameters than RPD groups, but statistically not significant. Type 2 of RPD group showed lower GI and SBI, but statistically not significant. Type 3 of CB group showed the highest GI and SBI and type 2 showed the highest tooth mobility, but there is no differences between the same type of groups. In conclusion, only minor differences in periodontal conditions were recorded in RPD and CB group.