• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.65-105
• /
• 2018

This study examines the employment relations of TNC subsidiaries in Central and Eastern Europe(CEE). Specifically, this study analyzes the employment relations of Volkswagen subsidiaries, which has led the restructuring the CEE's automobile industry since the collapse of socialist regimes, and Hyundai subsidiaries, which has sought to cast employment relations through Greenfield Investment as a latecomer. After the collapse of socialism, with the massive inflow of foreign direct investment and the social legacy of weak labor unions, CEE has been included in the global production network as low-wage production base. Both VW and Hyundai have entered the CEE with their own characteristics and global strategies that have been developed in their home countries and have developed the local production. In the process, both have formed local employment relations, combining low-wage, unstable employment, and weak labor unions of CEE under their own strategy. In recent years, however, it has been doubtful of the sustainability of employment relations based on the advantages of low-wage production bases, as the pools of low-wage workforce decline and new union movements occur in CEE. These changes in CEE are an indication of the inherent contradiction of low-wage production base strategies.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.29-58
• /
• 2016

'Post-memory' is the act of remembering traumatic events in history by subsequent generations who have not had direct experiences or relations with them. For this reason, the narratives of 'post-memory' are considered as re-interpretations of the past deeply influenced by current perspectives and concerns. The Chilean film NO goes back to the Referendum of 1988 in order to examine the "NO campaign" which was opposed to another eight years of continuation of the Pinochet regime. Although this campaign contributed significantly to the Chilean democratization, the filmmaker does not just celebrate it: rather he attempts to cast a critical reflection on its strategies that eventually turned democracy into a "commodity" by deploying commercial language and marketing tools for characterizing and describing it. On the other hand, the Korean movie The Attorney sheds light on the story of an attorney who, during the military regime in the 1980's, became a human rights lawyer when he tried to advocate for university students accused of violating national security law. This film reconstitutes the meaning of democracy built upon the logic of "common-sense" that privileges freedom and fundamental human rights over Statism. Despite the different historical contexts between Chile and South Korea, these two movies retell the history of a dictatorship that ended a couple of decades ago. In doing so, they raise questions about history, memory and democracy in order to deepen the understanding of current social and political circumstances while placing an emphasis on the roles and responsibilities of intellectuals during the transition to democracy and democratic consolidation.

• The Korean Journal of Archival Studies
• /
• no.9
• /
• pp.3-40
• /
• 2004

In this article, the elements usually included in the official documents issued by the Chosun Governor General office, the process of a certain document being put together and legally authorized, and its path of circulation and preservation are all examined. In order to create an official document of the Governor General office with legal authorization, a draft of a bill had to go through several discussions and a subsequent agreement before it was finally approved. Personnels involved in the discussion stage had the authority to ask for modifications and retouching of the draft, and the modifying process were all recorded in order to make clear who was responsible for a certain change or who objected to what at any given stage of the process. The approved version of an official document was called the 'Completed one(成案), and it was issued after the contents were turned into a fair copy by the office that originated the draft in the first place. With the original finalized version left in custody of that office, the fair copy was handed over to the Document department which was responsible for issuing outgoing documents. After the document was issued and the contained orders were carried out, the originally involved offices began to classify the documents according to their own standards and measures for safekeeping, but it was the Document department that was mainly responsible for document preservation. The Document department classified the documents according to related offices, nature of the documents(편찬류별), and most suitable preservation methods(보존종별). The documents were made into books, and documents to be permanently destroyed were handed over to the Account office where they would be demolished. The manners of document processing of the Chosun Governor General office was in fact a modified version of the manners of the Japanese government. Modifications were made so that the process would be more suitable to the situations and environment of the Chosun society. The office's managing process was inherited by the Chosun government after the Liberation, and cast a significant impact upon the document managing manners of the Korean authorities. The official document administration of the Chosun Governor General office marked both the beginning of the colony document administration, and also the beginning of a modernized document managing system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.447-455
• /
• 2019

When constructing LNG storage structures using the cast-in-place method in extreme areas, the construction cost and time may be increased due to the poor working environments and conditions. Therefore, demand for modular energy storage tanks is increasing. In this study, we propose using an SCP module as an alternative for lighter-weight LNG storage tanks. The purpose of this study is to evaluate the feasibility of LNG storage outer tanks by performing bending tests on the thickness of composite steel plate concrete under field conditions. The loads on specimens with thicknesses of 100 mm and 200 mm were linearly increased to the design final loads of 413 kN and 822 kN, respectively. The slope was rapidly changed, and fracture occurred. The two test conditions showed linear behavior until the steel plate yielded, and after an extreme load behavior, sudden yielding of the steel plate yield occurred in the SCP bending test according to the INCA guidelines. The results satisfied the design flexural load and showed the possibility of using the specimens in a modular LNG outer tank. However, it is necessary to evaluate the structural performance of the SCP by performing compression and shear tests in future research.

• Journal of Korea Foundry Society
• /
• v.39 no.2
• /
• pp.26-31
• /
• 2019

In this study, the mechanical characteristics and microstructure of hypereutectic Al-17Si-5Fe extruded alloys prepared by a rapid solidification process (RSP) were investigated. The hypereutectic Al alloy was fabricated by means of RSP and permanent casting. For RSP, the Al alloy melted at $920^{\circ}C$, cooling the specimens at a rate of $10^6^{\circ}C/s$ when the RSP was used, thus allowing the refining of primary Si particles more than when using permanent casting, at a rate of about 91%. We tested an extrusion RSP billet and a permanent-cast billet. Before the hot-extrusion process, heating to $450^{\circ}C$ took place for one hour. The samples were then hotextruded with a condition of extrusion ratio of 27 and a ram speed of 0.5 mm/s. Microstructural analyses of the extruded RSP method and the permanent casting method were carried out with OM and SEM-EDS mapping. The mechanical properties in both cases were evaluated by Vickers micro-hardness, wear resistance and tensile tests. It was found that when hypereutectic Al-17Si-5Fe alloys were fabricated by a rapid solidification method, it becomes possible to refine Si and intermetallic compounds. During the preparation of the hypereutectic Al-17Si-5Fe alloy by the rapid solidification method, the pressure of the melting crucible was low, and at faster drum speeds, smaller grain alloy flakes could be produced. Hot extrusion of the hypereutectic Al-17Si-5Fe alloy during the rapid solidification method required higher pressure levels than hot extrusion of the permanent mold-casted alloy. However, it was possible to produce an extruded material with a better surface than that of the hot extruded material processed by permanent mold casting.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.113-122
• /
• 2019

Tooth wear is gradually increasing with increasing life expectancy. In particular, it is important to establish a treatment plan in the early stages so that it does not proceed to moderate or severe wear stages. It is essential to diagnose tooth wear accurately in order to plan a treatment for it. There are many risk factors including age, diet, and drugs which affects tooth wear. For the diagnosis of a tooth wear, appropriate index and evaluation method should be used. There were various tooth wear indices such as TWI, Lussi index, BEWE, and TWES. The evaluation method includes clinical examination, dental cast examination and clinical photographs. Recently, a 3D scanner is being used to assess tooth wear. The risk factors, tooth wear evaluation system, the methods of measuring tooth wear, and related literature were reviewed. The strengths and weaknesses of each index and evaluation methods were compared to derive a proper way to diagnose tooth wear.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.138-153
• /
• 2015

A Jincheon Seokjangri B23 furnace was reconstructed and iron smelting experiment was performed to investigate an ancient Baekjae iron production process. The work mainly described in this paper is the $1^{st}$ and $2^{nd}$ experiments among the several experiments carried out at Jungwon National Research Institute of Cultural Heritage. Iron ore(magnetite) and oak charcoal were used as a source and a foot bellow was used for air supply. Common results of the experiments are masses of iron, slag and charcoal formed in the furnace. Most iron lumps were formed nearby the tuyere rather than the area of tapping hole. Metallographic and chemical analysis shows that the iron lumps can be used for either forge or cast depending on their carbon content. Low Fe content and glassy texture of the inner slags suggest that the operation environment was quite reducing. Based on the results of the iron smelting experiments, measurements and analysis, various information was obtained regarding physical-chemical and metallurgical processes of the ancient iron smelting process. It is firmly believed that its undisclosed contents can be revealed more in depth with continual reconstitution experiments.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.48-57
• /
• 2014

More than 30 lead beads have been excavated from buddhist temples and sites but the production times are unknown the origin. The aim of this study is to estimate manufacturing technique and provenance of 11 beads through the chemical composition and isotope analysis. Results shows that the lead beads are composed of high-purity lead and cast using for 2 semicircle moulds. Furthermore, 11 lead beads are similar in size, chemical composition and casting methods. Lead isotope analysis data suggest that the provenance of lead beads are not Korea peninsula. Also it is estimated that 11 lead beads were divided in 2 groups considering the time and places of production. The future works will be executed additional scientific analysis and historical background due to confirm the manufacturing system and provenance.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.3
• /
• pp.363-375
• /
• 2019

Since the double-deck tunnel is deeply constructed in the city, it is necessary to secure the installation space of air supply and exhaust, escape passage stairs, elevator, distribution facilities and connection tunnels in the vertical shaft for the double-deck tunnel. Also, in order to minimize the effect of construction on adjacent area, it is necessary to construct the concrete structures at high speed in vertical shaft after tunnel excavation. Therefore, the slabs and the stairs in vertical shaft are needed to be constructed using precast concrete, and the rapid construction techniques of bracket for supporting the inner precast structure are needed. The bracket installation methods include cast-in-place concrete, precast concrete and steel. In this study, the improvement of the steel brackets with good economical efficiency and good workability was carried out in consideration of the improvement of the construction speed. We have developed a new bracket that is optimized through bracket shape improvement, anchor bolt position adjustment and quantity optimization. As a result of the structural performance test, it was confirmed that the required load supporting capacity was secured. As a result of structural performance test for bar type anchor bolt and bent anchor anchor bolt, it was confirmed that the required load carrying capacity was secured and that the load bearing capacity of bent anchor bolt was large.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.253-258
• /
• 2019

The gilt bronze statue, Seated Avalokiteshvara with a Thousand Hands, of the Goryeo dynasty, is the only one in Korea of its kind that has undergone a conservation process for the special exhibition entitled GORYEO: The Glory of Korea. For the conservation treatment, first, a component analysis (XRF) was conducted, and a manufacturing technique (CT) was analyzed. The results of the investigation revealed that the statue was alloyed with Cu, Sn, and Pb ternary bronze. Its surface, except for the detached plating layers, was originally plated using the mercury amalgam method. This statue was assembled after separately casting each part of the body, such as the left and right arms and the wrists, including the hands, with objects. In particular, each wrist was cast and fitted with a metal nail to express each object in the hands more precisely. Inside the statue, there were five iron cores: two for the head, one for the left elbow, one for the right flank, and one for the right waist. For the preservative treatment, natural adhesive agents, including vegetable gelatin and glue (20%), were mixed with alcohol to protect the base metal and adhere to the plating layers. Using synthetic resin (CDK 520+SN-sheet) for the damaged parts, the restored parts could be attached and detached to/from the statue. Eventually, the compositional analysis and conservation treatment left the statue in a stable condition and ready for exhibitions and future studies.