• Journal of Korean Society of Rural Planning
• /
• v.10 no.3 s.24
• /
• pp.27-32
• /
• 2004

The purpose of this study is on identifying the restoration guidelines of supplementary village grove and villageside forest in case of Neunggil village in Jinan county of Korea. These forests were managed very well before industrialization by village residents in order to obtain fuels and organic fertilizers traditionally. But recently, these forests were abandoned by using natural gas, oil and chemical fertilizer. Therefore, species diversity of these forests was downward and traditional rural landscape was lost. Accordingly, this study suggested the restoration guidelines of these forests through restoring the relationship between man and nature. For this, vegetation map was made by quadrat method. And management guidelines of these forests were suggested by the analysis of vegetation map. Also, for the restoration of supplementary village grove, Miyawiki professor's method of Yokohama university through introducing potential natural vegetation was suggested.

• Journal of Technologic Dentistry
• /
• v.32 no.1
• /
• pp.65-78
• /
• 2010

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.389-396
• /
• 2017

Restorations of automotive parts have been done ever since the first vehicle was produced. Because the most expensive parts of a vehicle are in the engine system, there have been various restoration methods developed for engine parts. In the case of commercial diesel engines, the fuel injection device is a key and expensive component. It also has a significant effect on vehicle performance. In particular, reduced engine power and increased exhaust gas emissions may result from mechanical damage due to abrasion of the spill valve in the fuel injection system of a diesel engine. In this paper, restoration techniques for damaged parts are applied to restore the abrasion of a spill valve of fuel injection, also called as the "unit injector", of commercial diesel engines. In order to recover the damage, optimized polishing techniques using hard-metal and coating processes are applied. To evaluate restoration techniques for the spill valve, performance and durability tests are performed on a test bench.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.191-196
• /
• 2010

Power system restoration following a massive or complete blackout starts with energizing the primary restorative transmission system. During this primary restoration process, unexpected overvoltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. In the case of the Myanmar electric power system, there are so many wide outage experiences, including complete blackout cases, caused by 230kV line faults and so on. Consequently, Myanmar's system operators have been well trained to deal with wide blackouts. Howver, system blackout restoration has been conducted by relying on the experience of only a few specialists. So, more scientific analysis is required to meet the requirements necessary to ensure fast and reliable system restoration. This paper presents analytical results on the primary restorative transmission system of Myanmar, focusing on the problems during the early restoration process. Methodologies are presented that handle load pick-up, terminal voltage and the reactive capability limitation of black-start generators to compensate the Ferranti effect. Static and dynamic simulation with the PSSolution and EMTDC programs respectively for the six cases are performed in order to select the primary restorative transmission lines.

• 대한치주과학회:학술대회논문집
• /
• 1994.12a
• /
• pp.81-81
• /
• 1994

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.54-60
• /
• 2004

The purpose of this study is to analyzes the effects on planting of roof with planting block and grass in a school building where users actually spend daily life to measure indoor and outdoor temperature changes with existing roof. In case of planting of roof with a summer season, the highest temperature was shown lower about $1620^{\circ}C$ in the outdoor compared to the case of not performing it. On the other hand the lowest temperature was shown higher about $0.7^{\circ}C$ and the highest temperature lower about $1.1^{\circ}C$ in the indoor. In case of planting of roof with a winter season, the lowest temperature was shown higher about $1.712.8^{\circ}C$ compared to the case of not performing it. On the other hand, it was shown higher about $3^{\circ}C$ in the indoor. The results of this study, effects of temperature control was confirmed in the indoor where planting of roof was performed higher about $3^{\circ}C$ for winter season and lower about $1^{\circ}C$ for summer season compared to the case of indoor with existing roof.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.1
• /
• pp.55-75
• /
• 2017

The purpose of this study is to present the basic data for restoration of physical stream environment by analyzing habitat variables because habitat environment is changed due to the construction of waterfront space in urban streams. Assessment results of 10 habitat variables(three divisions) were almost same as optimal condition, in the reach of reference stream where there are no stream crossing structures and channel alteration. Assessment results of reaches in urban rivers, where streams were improved on water-friendly recreation activities, appeared to be marginal condition. Because habitat environment got worse due to stream improvement works such as construction of weir for water landscape, stepping stones for walking, low water revetment and high water revetment, and high water channel. In addition, in the case of mid gradient stream, the frequency of riffles was small or not existed because the intervals of the river crossing structures was short. In the case of mild stream types, the diversity of the pool was damaged due to the deposition of sludge in the upstream pool of weir and the installation of low water revetment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.3
• /
• pp.306-312
• /
• 2001

Achieving an aesthetic implant-supported restoration in the single tooth missing case can be challenging when the implant site is in e anterior region. The objective of this report is to focus on presurgical evaluation of implant site and systematic development of related prosthetic modalities. An accurate diagnostic evaluation, a systematically developed pesurgical plan, and knowledge and clinical skill of the various related therapeutic modalities are indispensible. Collection of patient's information, appropriate abutment selection, soft tissue contour, implant axis, and occlusion need to be discussed for aesthetic clinical outcome. For aesthetic restoration, such as surgical guide stent for precise implant positioning customized provisional restoration for development of optimal periimplant soft tissue contours, and fabrication customized abutment (mesiostructure) for veriable emergence profile, are recommended.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.95-101
• /
• 2013

Recently, the demand for esthetic improvement by a treatment neither time consuming nor invasive is increasing. The patient wanted the maxillary anterior teeth appearance to be improved by prosthetic treatment, not other treatments such as orthodontic, periodontal, and endodontic treatments, despite the limit of esthetic improvement. In this case, among the recent variety of all ceramic systems for the aesthetic prosthetic restoration, we selected the zirconia-based system as a method of restoration in order to conceal the discoloration of teeth. The patient was satisfied with the esthetic results.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.66-71
• /
• 2016

Intellectual disability is accompanied by a high incidence of congenitally absent teeth and supernumerary teeth, and is observed more frequently than are disorders of location and order during delayed eruption, when accompanied by other symptoms. Furthermore, it is associated with a higher occurrence of dental anomalies such as conical teeth, microdontia, and amelogenesis imperfecta. As it is difficult to obtain adequate cooperation from patients with intellectual disabilities, physical restraint and conscious sedation using medication and general anesthesia can be considered. Reshaping of conical teeth with resin composite may be helpful to rehabilitate patients with oligodontia and a conical tooth shape. Diagnostic wax-up and a silicone matrix formed the basis for the successful reconstruction of the anterior teeth. This case describes the treatment of a patient with intellectual disability who had oligodontia and conical-shaped incisors. Under general anesthesia, the patient was treated using direct composite resin restoration.