• Journal of Forest and Environmental Science
• /
• v.29 no.4
• /
• pp.249-256
• /
• 2013

The aim of the study was to reveal the scope and benefits derives from establishing carbon forests in a country like Bangladesh. Carbon forestry is the modernized forestry practice that evolves no cutting of trees or vegetation rather conserves them in the wood. Trees might be the source of carbon sink at large scale by establishing carbon forests. To find out how and in what extent forests of Bangladesh could contribute to global emission reduction, tree species of economic importance were taken into account about their carbon sequestration potential. Data source was a secondary one. Bangladesh has subtropical evergreen and deciduous forest tree species. Here trees can sequester almost 45-55 percent organic carbon in their biomass. On an average, trees in different types of stands can sequester 150-300 tC/ha. Carbon value of these forests might be 7,500-15,000 USD per hactre (assuming 50 USD per equivalent $tCO_2$). Thus, accounting tree carbon credits of total forested lands of Bangladesh, there might be a lump sum value of $1.89{\times}10^{10}-3.79{\times}10^{10}$ USD. If soil carbon is added, this amount would jump. Alternatively, there are two times higher spaces as marginal lands than this for starting carbon forestry. However, carbon forestry concept is still a theoretical conception unless otherwise their challenges are addressed and solved. Despite of this, forests of Bangladesh might be the key showcase for conserving biodiversity in association with carbon capture. Protected areas in Bangladesh are of government wealth, however, degraded and denuded waste and marginal lands might be the best fit for establishing carbon forests.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.39-53
• /
• 1999

This study quantified carbon uptake and emissions in urban landscape, and the role of urban greenspace in atmospheric carbon reduction for several cities of Chuncheon and Kangleung in Kangwon province. Mean carbon storage by trees and shrubs was 26.0 t (mertric tons)/ha in Chuncheon and 46.7 t/ha in Kangleung for natural lands, and ranged from 4.7 to 6.3 t/ha for urban lands (all land use types except natural and agricultural lands) in both cities. Mean annual carbon uptake by trees and shrubs ranged from 1.60 to 1.71 t/ha/yr for natural lands, and from 0.56 to 0.71 t/ha/yr for urban lands. There was no significant difference (95% confidence level) between the two cities in the carbon storage and annual carbon uptake per ha, except the carbon storage for natural lands. Organic carbon storage in soils (to a depth of 60 cm) of Chuncheon average 24.8 t/ha for urban lands and 31.6 t/ha for natural lands, 1.3 times greater than for urban lands. Annual carbon accumulation in soils was 1.3 t/hr/yr for natural lands of the study cities. Annual per capita carbon emissions from fossil fuel consumption were 1.3 t/yr in Chunceon and 1.8 t/yr in Kangleung. The principal carbon release in urban landscapes was from transport and industry. Total carbon storage by urban greenspace (trees, shrubs, and soils) equaled 66% of total carbon emissions in Chuncheon and 101% in Kangleung. Carbon uptake by urban greenspace annually offset total carbon emissions by approximately 4% in the study cities. Thus, urban greenspace played a partial important role in reducing atmospheric $CO_2$ concentrations. To increase $CO_2$ uptake and storage by urban greenspace, suggested are conservation of natural lands, minimization of hard surfaces and more plantings, selection of tree species with high growth rate, and proper management for longer healthy tree growth.

• Journal of Environmental Impact Assessment
• /
• v.19 no.6
• /
• pp.607-615
• /
• 2010

Urban green space is often at the centre of the debate on urban substantiality because it provides functions of space, e.g. for wildlife, recreation, growing vegetables, psychological wellbeing, social interaction, etc. Traditionally, the various functions of urban green spaces clearly show that green spaces contain important values that contribute to the overall quality of urban life. After Kyoto protocol, it has becoming important to more accurately evaluate carbon uptake by urban green space. Many studies have analyzed the benefits, costs, and carbon storage capacity associated with urban green space. These studies have been limited by a lack of research on urban tree biomass and carbon uptake by soil, such that estimates of carbon storage in urban systems. This study calculate more accurately the amount of carbon uptake by urban green space. This study also complement the existing methods to estimate the urban green space carbon uptake. It has been studied how to evaluate carbon uptake function of urban green space. The surface area of urban green space increased 5% by complemented method and carbon uptake is also increased. Based on this result, the carbon uptake per capita was analysed and compared to the area of carbon uptake. And this study discussed the reasons for the differences between the new and earlier estimates, as well as implications for our understanding of the global carbon cycle. In conclusion, these results could contribute as preliminary data to policy makers when climate change adaptation strategy is established.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.5
• /
• pp.71-81
• /
• 2013

This study is aimed to provide basic data for the estimation of carbon effects in development project areas such as Happy Housing Project which includes redevelopment and reconstruction projects by inducing the basic unit of carbon effects and strategic planning and management to enhance carbon effects. According to the analysis, in urban parks, carbon uptake and carbon storage by the unit area of living area parks were $7.614kg/m^2$ and $18.5203kg/m^2$ respectively while carbon uptake and carbon storage by the unit area of theme parks were $1.2261kg/m^2$ and $2.831kg/m^2$ each. In facility greens, carbon uptake and carbon storage were $0.5683kg/m^2$ and $0.6636kg/m^2$ respectively while they were $10.77kg/m^2$ and $13.69kg/m^2$ individually in other urban planning facilities. In other greens, on the contrary, carbon uptake and carbon storage were $0.45kg/m^2$ and $1.02kg/m^2$ respectively. In site landscape, carbon uptake and carbon storage by the unit area of apartment landscape were $3.7394kg/m^2$ and $9.2292kg/m^2$ each.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.292-299
• /
• 1993

In this paper the effects of the length of carbon fiber on the wear properties of carboni carbon composites were investigated. Carbon/carbon composites were fabricated by the liquid impregnation method using the resol-type phenolic resin as a matrix precursor and PAN-based, non-surface treated carbon fiber as a reinforcement. The measured values of the friction coefficient of carbon/carbon composites against AlSl 304 stainless steel ranged from 0.2 to 0.3 under the operating condition used in this study. The effect of the length of carbon fiber on the friction coefficient of carbon/carbon composites were not found. But, it was realized that the wear rate of carbon/carbon composites tends to increase, as the length of carbon fiber increases.

• Composites Research
• /
• v.31 no.6
• /
• pp.412-420
• /
• 2018

In this work, phenolic resins containing conductive carbon fillers, such as, petroleum coke, carbon black, and graphite, were used to improve the surface heating elements by impregnating a pitch-based carbon paper. The influence of conductive carbon fillers on physicochemical properties of the carbon paper was investigated through electrical resistance measurement and thermal analysis. As a result, the surface resistance and interfacial contact resistivity of the carbon paper were decreased linearly by impregnating the carbon fillers with phenol resins. The increase of carbon filler contents led to the improvement of electrical and thermal conductivity of the carbon paper. Also, the heating characteristics of the surface heating element were examined through the applied voltage of 1~5 V. With the applied voltage, it was confirmed that the surface heating element exhibited a maximum heating characteristic of about $125.01^{\circ}C$(5 V). These results were attributed to the formation of electrical networks by filled micropore between the carbon fibers, which led to the improvement of electrical and thermal properties of the carbon paper.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.73-77
• /
• 2021

Flexible electrodes for wearable devices have been actively studied in not only achieving mechanical/electrical stability, but also providing various functionalities for extending its industrial application. In this study, a flexible carbon/PDMS composite is prepared by addition of carbon black (CB) as a conductive filler, and effect of CB with different contents on electrical properties of the composite was investigated for the application of flexible electrodes, temperature sensor and heater. With increase of CB contents, resistivity of the carbon/PDMS was increased, and excellent durability was observed, confirmed by repetitive stretching deformation test. Resistance increase of the carbon/PDMS with temperature reveals the property of positive temperature coefficient, which can be applied for temperature sensor. Also, joule heating on the carbon/PDMS was observed when electrical potential was applied, indicating the applicability of the carbon/PDMS for heater.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.694-697
• /
• 2015

We investigated the characterizations of carbon films fabricated by dual magnetron sputtering under various RF powers for the improvement of physical properties in carbon fiber (CF). All sputtered carbon films exhibited amorphous structure, regardless of RF powers, resulting in uniform and smooth surfaces. The hardness and elastic modulus are increased with the increase of RF power, and the adhesion and friction properties of carbon films were improved with the increase of RF power. In the results, The increase of RF power in the sputtering method improved tribological properties of the carbon films, and these attributes can be expected to improve the physical properties of the carbon fiber reinforcement plastics.

• Carbon letters
• /
• v.19
• /
• pp.32-39
• /
• 2016

In this work, we studied the effects of electrochemical oxidation treatments of carbon fibers (CFs) on interfacial adhesion between CF and epoxy resin with various current densities. The surface morphologies and properties of the CFs before and after electrochemical-oxidation-treatment were characterized using field emission scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and single-fiber contact angle. The mechanical interfacial shear strength of the CFs/epoxy matrix composites was investigated by using a micro-bond method. From the results, electrochemical oxidation treatment introduced oxygen functional groups and increased roughness on the fiber surface. The mechanical interfacial adhesion strength also showed higher values than that of an untreated CF-reinforced composite.

• Carbon letters
• /
• v.10 no.1
• /
• pp.38-42
• /
• 2009

This study aims to find a correlation between XRD and Raman result of the oxidized high modulus carbon fibers as a function of its oxidation degrees, and compare with the isotropic carbon fiber reported early. La of the high modulus carbon fiber prepared by oxidation in carbon dioxide gas have been observed using laser Raman spectroscopy. The basic structural parameters of the fibers were evaluated by XRD as well. The La of the original high modulus carbon fibers were measured to be 144 ${\AA}$ from Raman analysis and 135 ${\AA}$ from XRD analysis. La of the 92% oxidized fiber were 168 ${\AA}$ by using Raman and 182 ${\AA}$ by using XRD. There was some correlation between the La value obtained from Raman and XRD. However the La value changes of the high modulus carbon fiber through whole oxidation process showed opposite tendency compare with the isotropic carbon fiber because of the fiber structure basically.