• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.99-104
• /
• 2005

The CARB in USA has demanded OBD functions that detect any deterioration of performance of OTS as well as a simple defect of OTS which can affect emission to meet the reinforced emission regulation. In this paper, OTS plausibility monitoring functions to meet the demand from CARB are discussed. The output from OTS is used for the diagnostics of the torque converter clutch stuck and the gear ratio synchronous error. It is possible to diagnose the abnormality of OTS function by considering the oil temperature characteristics which changes according to the driving status of vehicles. In result, the OBD regulations of the CARB can be satisfied obligating car manufacturer to detect any problems in OTS functions which can affect emissions.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.12
• /
• pp.1672-1683
• /
• 2021

Vibrio parahaemolyticus is recognized as one of the most important foodborne pathogens responsible for gastroenteritis in humans. The bla_CARB-17 gene is an intrinsic β-lactamase gene and a novel species-specific genetic marker of V. parahaemolyticus. In this study, a loop-mediated isothermal amplification (LAMP) assay combined with a lateral flow dipstick (LFD) was developed targeting this bla_CARB-17 gene. The specificity of LAMP-LFD was ascertained by detecting V. parahaemolyticus ATCC 17802 and seven other non-V. parahaemolyticus strains. Finally, the practicability of LAMP-LFD was confirmed by detection with V. parahaemolyticus-contaminated samples and natural food samples. The results showed that the optimized reaction parameters of LAMP are as follows: 2.4 mmol/l Mg²⁺, 0.96 mmol/l dNTPs, 4.8 U Bst DNA polymerase, and an 8:1 ratio of inner primer to outer primer, at 63℃ for 40 min. The optimized reaction time of the LFD assay is 60 min. Cross-reactivity analysis with the seven non-V. parahaemolyticus strains showed that LAMP-LFD was exclusively specific for V. parahaemolyticus. The detection limit of LAMP-LFD for V. parahaemolyticus genomic DNA was 2.1 × 10^-4 ng/μl, corresponding to 630 fg/reaction and displaying a sensitivity that is 100-fold higher than that of conventional PCR. LAMP-LFD in a spiking study revealed a detection limit of approximately 6 CFU/ml, which was similar with conventional PCR. The developed LAMP-LFD specifically identified the 10 V. parahaemolyticus isolates from 30 seafood samples, suggesting that this LAMP-LFD may be a suitable diagnostic method for detecting V. parahaemolyticus in aquatic foods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.130.6-130
• /
• 2001

On-Board diagnostic systems are installed in passenger cars and light trucks on today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. This wa primarily to meet EPA emission standards. The CARB requires that, by model year 1996, all vehicle sold in California contain a certain minimum "On-Board Diagnostic" capability to diagnose emissions-related failures of the engine control system. These diagnostic requirements have been designated as OBD with a goal of monitoring all of the emissions-related components on-board the vehicle for proper operation. Part of the intent of CARB´s OBD program is that a single diagnostic tester can be used to read the diagnostic information from any OBD-compliant vehicle. A tester which ...

• Korean Journal of Pharmacognosy
• /
• v.1 no.2
• /
• pp.11-17
• /
• 1970

The identification methods for tropane alkaloids so far known were limited on tropic acid esters such as atropine and was unable to detect mandelic acid esters such as homatropine. The present method employing thin-layer chromatography was able to detect violet coloration developed with any of them by Vitali-reaction. It was established that this violet coloration is due to the mesomerization of carb-anion in the alkaline solution.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1018-1021
• /
• 2006

Powdered metal parts and components may be carburized successfully in a vacuum furnace by combining carburizing technology $VacCarb^{TM}$ with a hi-tech control system. This approach is different from traditional carburizing methods, because vacuum carburizing is a non-equilibrium process. It is not possible to set the carbon potential as in a traditional carburizing atmosphere and control its composition in order to obtain a desired carburized case. This paper presents test results that demonstrate that vacuum carburizing system $VacCarb^{TM}$ carburized P.M. materials faster than traditional steel with acceptable results. In the experiments conducted, PM samples with the lowest density and open porosity showed a dramatic increase in the surface carbon content up to 2.5%C and a 3 times deeper case. Currently the boost-diffusion technique is applied to control the surface carbon content and distribution in the case. In the first boost step, the flow of the carburizing gas has to be sufficient to saturate the austenite, while avoiding soot deposition and formation of massive carbides. To accomplish this goal, the proper gas flow rate has to be calculated. In the case of P.M. parts, more carbon can be absorbed by the part's surface because of the additional internal surface area created by pores present in the carburized case. This amount will depend on the density of the part, the densification grade of the surface layer and the stage of the surface. "as machined" or "as sintered". It is believed that enhanced gas diffusion after initial evacuation of the P.M. parts leads to faster carburization from within the pores, especially when pores are open . surface "as sintered" and interconnected . low density. A serious problem with vacuum carburizing is delivery of the carbon in a uniform manner to the work pieces. This led to the development of the different methods of carburizing gas circulation such as the pulse/pump method or the pulse/pause technique applied in SECO/WARWICK's $VacCarb^{TM}$ Technology. In both cases, each pressure change may deliver fresh carburizing atmosphere into the pores and leads to faster carburization from within the pores. Since today's control of vacuum carburizing is based largely on empirical results, presented experiments may lead to better understanding and improved control of the process.

• Archives of Pharmacal Research
• /
• v.18 no.6
• /
• pp.449-453
• /
• 1995

The search for patinum (II)-based compounds with improved therapeutic properties was prompted to design and synthesize a new family of water-soluble, third generation cis-diamminedichlorplatinum (II) complexes linked to uracil and uridine. Six heretofore undescribed uracil and uridine-platinum (II) complexes are ; [N-(2-aminoethyl)uracil-5-carboxamide]dichloroplatinum (II)(3a), [N-2(2-aminoethyl)uracil-6-carboxmide]dichloroplatinum (II) (3b),[5-(2-aminorthyl)carbamoyl-2',3',5',-tri-O-acetyluridine] dichloroplatinum (II) (6b), [5-(2-aminoethyl)-carbamoyl]-2',3',5',-tri-O-acetyluridine] dichloroplatinum (II) (6b), [5-(2-aminoethyl)carbamoylu-ridine]dihloroplatinum (II) (7a), [6-(2-aminoethyl)carbamoyluridine]dichloroplatinum (II) (7b). These analogues were prepared from the key starting materials, 5-carboxyuracil (1a) and 6-carboxyuracil (1b) which were reacted with ethylenediamine to afford the respective N-(2-aminoethyl)uracil-5-carboxmide (2a) land N-(2-aminoethyl)uracil-6-carboxamide (2b). The cisplatin complexes 3a and 3b were obtained through the reaction of the respective 2a and 2b ficiently introduced on the .betha.-D-ribose ring via a Vorbruggen-type nucleoside coupling procedure with hexamethyldisilazane, trimethylchlorosilane and stannicchloride under anhydrous acetonitfile to yield the sterospecific .betha.-anomeric 5-carboxy-2',3',5'-tri-O-acetyluridine (4a) and 6-carboxy-2',3',5'-tri-O-acetyluridine (4b), respective 5-(2-aminoethyl)carbamoyl-2',3',5'-tri-O-acetyluridine (5a) and 6-(2-aminoethyl)carbamoyl-2',3',5'-tri-O-acetyluridine (5b). The diamino-uridines 5a and 5b were reacted with potassium tetrachloroplatinate (II) to give the novel nucleoside complexes, 6a and 6b respectively which were deacetylated into the free nucleosides, 7a and 7b by the treatment with CH/sub 3/ONa. The antitumor activities were evaluated against three cell lines (K-562, FM-3A and P-388).

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.68-75
• /
• 1991

본 고에서는 배기가스 저감(특히 HC를 중심으로)에 대해 알려져 있는 기술들을 소개하고 가시적인 목표로 주어진 CARB의 저공해 차량에 적용 가능한 기술들을 예측해 보며 여러분야 전문가들의 열띤 토론의 장을 만들어 향후 엔진개발의 방향 설정에 기여해 보고자 한다. 여기서 논의의 범위를 승용차용 엔진으로 한정함을 첨언해 둔다.

• Archives of Pharmacal Research
• /
• v.21 no.6
• /
• pp.723-728
• /
• 1998

The chemical behaviours of 4-methyl-2-oxo-2H-benzopyran-7-yl oxoacetyl hydrazine (2) towards some different reagents such as anhydride compounds, aromatic aldehydes, carb on disulphide, and nitrous acid yielded the corresponding pathalazine derivatives (3, 4, 5), hydrazone derivative (6), 1,3,4-oxadiazole derivative (7, 8, 9) and acid azide (10) respectively. Treatmen of 10 with absolute alcohols, amines and ethyl amino acid ester gave the corresponding carbamate derivative (11), substituted urea derivative (12) and ethyl substituted alkyl acetate (13) respectively. The biological activity of some synthesized compounds was evaluated.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.1-4
• /
• 2015

The current official perfluorochemicals (PFCs) analysis method is established with hydrophilic-lipophilic balance (HLB) solid phase extraction (SPE) clean-up method with LC-tandem mass spectrometry ($MS^n$). Herein the HLB clean-up method from the official method by Korean government was modified with Envi-Carb$^{TM}$ to improve the clean-up efficiency for agricultural water and the unexpected UV disturbance in the water was effectively removed by the adsorbent treatment without a significant disturbance of quantitation. And quadrupole time of flight mass spectrometry (qTOFMS) was suggested to the available $MS^n$ instruments for the residue analysis of PFCs based on the ng/L of quantitation limits in water as well.

• Mass Spectrometry Letters
• /
• v.14 no.4
• /
• pp.178-185
• /
• 2023

QuEChERS is used worldwide as a universal sample preparation method with many benefits, such as being quick, easy, cheap, effective, rugged and safe. This study examined whether QuEChERS can be employed in isotope dilution mass spectrometry (ID-MS) for accurate analysis of pesticides in food. The ratios of fortified values and measured values of malathion and fenitrothion using the QuEChERS method were compared with those using the solid phase extract (SPE) method which was previously used in this laboratory. The separations of the two pesticides on DB-5MS and VF-1701MS columns were compared. Malathion and fenitrothion were fortified into kimchi cabbage and pretreated with the QuEChERS method and the SPE method. The results obtained using the DB-5MS column varied according to the sample preparation method, column and pesticide level. Using the VF-1701 column, ratios were 98-102% by both QuEChERS and Carb/NH₂ SPE method for all fortification level. Malathion and fenitrothion were fortified into strawberry samples for comparison with kimchi cabbage. The results for the strawberry samples indicated that the ratios were not influenced by the sample preparation methods or GC column. The QuEChERS method could be acceptable in the ID-MS method for pesticide residue analysis in food, however other conditions should be carefully considered for accurate determination, such as the column, amount of analyte and food matrix.