• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.44-50
• /
• 2011

The solar radiation, inner temperature of the tilted box and the amount of condensed water were measured to find the most effective purified water production system. The inner temperature of the tilted box was related with solar radiation that was affected by sunshine and cloud. With analyzing those relationships of the solar radiation, inner box temperature, the angle of tilted boxes and amounts of water condensation optimal collecting system area could be calculated.

• Journal of the KSME
• /
• v.30 no.3
• /
• pp.267-274
• /
• 1990

기술분야의 발전이 거듭됨과 병행하여, 산업계의 설계 해석 부서에서 CAE의 중요성은 컴퓨팅 시 스템과 더불어 더욱 강조되고 있다. 슈펴 컴퓨팅 파워의 필요성은, 첫째, applied mechanics의 advanced 해석분야, 둘째, 대형 엔지니어링 문제해석 결과처리 (data acquisition & management), 셋째, real time response와 integrated 엔지니어링 시스템개발 (CAD/CAM 데이터와의 연계성) 등의 측면에서 나타난다고 볼 수 있다. 원가, 안정성 그리고 신뢰성은 모두 만족시키는 효율적인 방안으로서는 대형 수퍼 컴퓨터와 마이크로 컴퓨터의 중간 역할을 할 수 있는 hybrid type의 미니 수퍼 시스템, 즉 departmental highly-parallel 시스템의 등장이 필수적이라고 할 수 있다. 또한, 산업계의 설계 해석 지원과 관련, 구조, 유체, 동력학 등의 분야별 응용 문제와 numerical formulation등의 특성에 적합한 시스템 configuration과 프로세싱이 개발되어야 한다. 이는 실 수요자의 상황에 맞는 "목적성 전용 machine"의 등장이 가능해 질 것으로 판단된다. 향 후, vectorization 그리고 parallelization 된 소프트웨어의 가용성이 극복해야 할 큰 과제로 남아 있 다고 본다.

• Journal of Powder Materials
• /
• v.8 no.1
• /
• pp.20-25
• /
• 2001

Most of mold manufacturing procedures have been automated by the introduction of NC machine tool and CAD/CAM system. But the three-dimensional surface curvature of the mold must be done by hand work of well-skilled workers. Magnetic abrasive polishing powders were investigated for surface polishing for 3D curvature. This study aims to investigate homogeneously distributed hard phase in Fe matrix and strong bonding between Fe-matrix and hard phase. The NbC powder, $B_4C$ powder and $Al_2O_3$ powder were mixed in Fe-matrix respectively. Mixed Fe-hard phase powders were compacted by press and then these were melted by plasma melting. According to SEM, XRD and OM observation, Fe-NbC magnetic abrsive powder had the most homogeneous distribution and strong bonding. As a result of magnetic polishing, the surface roughness before magnetic polishing, 1 ${\mu}m$ $R_{max}$, was reduced to 0.2 ${\mu}m$ $R_{max}$ over the entire inner surface of the tube.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2014

In this study, the authors carried out experiments and numerical simulations in order to clarify the pressure pulsation characteristics in multiple-delivery rotating-cam and stationary-cylinder type radial piston pumps. Also, a tee filter was applied to the pump in order to mitigate the pressure pulsation. Through the experiments and simulations, it was known that pressure pulsation with a magnitude higher than 40% of the mean load pressure could occur in the pump used in the experiments. Moreover, it was confirmed that a tee filter designed in this study could effectively mitigate the pressure pulsation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.57-62
• /
• 2021

CNC machining is used to fabricate various components. This has led to the development of processing-based industries for the production of automobile, appliances, semiconductors, and rockets. Additionally, this machining has enabled economical mass production of high-quality products in industries. Magnesium alloy with a hexagonal closed packed configuration is prone to difficulties during plastic machining, has a high oxygen affinity, and exhibits poor corrosion resistance to seawater and the atmosphere. In this research, Al alloy A5083 was used to investigate and analyze the surface roughness with a certain depth of cut fixed by the machining center (DVM-500II) and various feed rates, speeds, and processing methods after modeling and simulated machining with Gibbs CAM.

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.43-54
• /
• 1995

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated soil and to confirm the application'of the model, which is composed of the elastic and plastic part in consideration of the matric suction and the net mean stress. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. The application of the model to silty sands is confirmed by the comparison between test and predicted results. During drying -wetting and loading -unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. Predicted deviator stresses are well agreed with test results in shearing process. Overall acceptable predictions are reproduced in high confining pressure. Usefulness of the model is confirmed for the unsaturated soil except volumetric strain, which is not well agreed with the test results due to deficiency of dilatancy of the model in low confining pressure. It is, therefore. recommended to study the behavior of dilatancy for an unsaturated soil.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.59-67
• /
• 2005

This paper presents experimental and numerical research results of centrifuge model tests performed to investigate the geotechnical engineering behavior of slag compaction pile as a substitute of sand compaction pile. For centrifuge model tests, bearing capacity of composit soil improved with slag compaction piles, stress concentrations in-between pile and soft clay, settlement characteristics, and failure modes were investigated with slags differing in their relative density. A slag was found to be a good substitute for a sand since the slag compaction pile model showed a greater yield stress intensity up to $30\%$ than the sand compaction pile model under the identical testing conditions. Stress concentration ratio tended to increase with the relative density of slag pile and the clear shear lines in the piles were observed at the depth of $2D{\sim}2.5D$ (D=dia. of model pile) from the top of the piles after loading tests. Numerical analysis with a software of CRISP, implemented with the modified Cam-clay model, was carried out to simulate the results of centrifuge model test. Test results about characteristics of load-settlement curves and stress concentration ratio are in relatively good agreements with numerical estimations.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.133-144
• /
• 2003

Horizontal consolidation characteristics of Busan marine clay were investigated by computing coefficient of horizontal consolidation from Piezocone data and comparing their results with those of standard consolidation test. It is well known that current prediction models of $c_h$ for high plastic soils have large uncertainties, and show a great difference between the predicted and the measured values. However, the spherical models and expanding cavity theory of Torstensson(1977), and Burns & Mayne(1998) based on modified Cam-Clay model with critical limit state concepts have relative reliability in estimating $c_h$ and good applicability in highly plasticity soils. In this paper, a normalization technique was used to evaluate $c_h$ using the Burns and Mayne's method based on the dissipation test, and their normalized consolidation curves give 0.015 of time factor($T_{50}$) when 50% degree of consolidation is completed. Comparison study using Piezocone data obtained at other similar ground site shows 1.5 times less systematicality than that of standard consolidation test, which indicates considerable approximation with the measured values because standard consolidation test gives the difference of three to few times compared with the measured values. In addition, design chart for estimating $c_h$ based on the chart from Robertson et al.(1992) and using the other method of the direct prediction from the of dissipation test was newly proposed. It is judged that new proposed chart is very applicable to Korean marine soils, especially in very high plastic soils.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.39-43
• /
• 2002

This study was investigated the anti-angiogenic activities of Cnidium officinale Makino and Tabanus bovinus by using Chorioallantoic membrane (CAM) and rat cornea. First experiment, the fertilized chicken eggs were kept in a humidified egg incubator at $37^{\circ}C$. After 4 days incubation, about 3 ml of albumin was aspirated from eggs with an hypodermic needles through a small hole drilled at the narrow end of the eggs, and the shell membrane on the floor of the air sac was peeled away. Embryos with chorioallantois of 3~5 mm in diameter were employed for the assay of antiangiogenic activity. Retinoic acid was used as a positive control for this experiment. After 48 h of treatment. branching pattern of blood vessels below coverslip containing retinoic acid ($10{\mu}g/egg$) was dramatically decreased. A simiar angiogenic inhibition was observed in the CAM treated with $50{\mu}g/egg$ of Cnidium omcinale Makino and Tabanus bovinus extracts. Second experiment, rat corneal neovascularization was induced by suturing (one stitch) the cornea with 10-0 nylon, and terramycin was applied on the cornea for I week to prevent corneal inflammation. In the cornea of rats untreated with herbal extracts, numerous vessels were usually seen invading the cornea by day 2 or 3 after suture, and reaching the lesion area within 5~6 days. Corneal neovascularization was gradually increased and peaked at 3 weeks. In contrast to this, herbal extracts conspicuously inhibited the angiogenesis, Oral administration of herbal extracts (20 mg/kg body weight/day) for 4 weeks significantly inhibited the rat corneal angiogenesis induced by suture, and the length of blood vessels in herbal medicine-treated rat cornea was conspicuously lower than that in control animals. A similar phenomenon was also observed in the rat cornea treated with thalidomide (200 mg/kg body weight/day). These findings indicate the anti-angiogenic properties of Cnidium officinale Makino and Tabanus bovinus, suggesting that these properties may be one of the pharmacological mechanisms underlying the anti-tumor and anti-metastatic activities of herbal extracts tested in this study.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.49-56
• /
• 2013

Purpose: The deformation characteristics induced by non-destructive stresses using piezoelectric transducer(PZT) were analyzed for 3-unit fixed partial dentures manufactured PFM, Everest(CAD/CAM) and Zirkonzahn(copy milling, MAD/MAM) by electron speckle pattern interferometery(ESPI). Methods: The ESPI analysis after loading the restoration with PZT by applying electric voltage of 900mV at the points of 10 mm above the base of the prostheses. Results: PFM and All-Ceramic Everest prostheses showed about 0.1 ${\mu}m$ while that of All- Ceramic Zirkonzahn prostheses showed 0.085 ${\mu}m$, demonstrating that Zirkonzahn displaced less. For PFM and All-Ceramic Zirkonzahn prostheses, the displacements were large at just below the loading point, while generalize displacement was shown over the loading point and weak connector areas for All-Ceramic Everest prostheses. Conclusion: We could find that the deformation characteristics induced by non-destructive stresses using PZT analyzed by ESPI were similar to the fracture strengths evaluated using universal testing machine.