• Journal of the korean Society of Automotive Engineers
• /
• v.31 no.3
• /
• pp.47-53
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.83-88
• /
• 2002

In order to predict the moldability of a injection molded part, a simulation of filling is needed. Short shot is one of the most frequent troubles encountered during injection molding process. The adjustment of process conditions is the most economic way to troubleshoot the problematic short shot in cost and time since the mold doesn't need to be modified at all. But it is difficult to adjust the process conditions appropriately in no times since it requires an empirical knowledge of injection molding. In this paper, the intelligent CAE system synergistically combines fuzzy-neural network (FNN) for heuristic knowledge with CAE programs for analytical knowledge. To evaluate the intelligent algorithms, a cellular phone flip has been chosen as a finite element model and filling analyses have been performed with a commercial CAE software. As the results, the intelligent CAE system drastically reduces the troubleshooting time of short shot in comparison with the experts' conventional methodology which is similar to the golden section search algorithm.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.113-121
• /
• 2000

A compact pre- and post-processor that runs on PC has been developed for the purpose of remote CAE. This includes a linear-finite-element-analysis module for on-site analysis of simple and midium-sized structural problems and an interfacing module for remote analysis of more complex cases such as nonlinear and large-scale linear problems which are cpu-consuming to solve. The software was designed to provide convenient interfacing capability for the use of client-server-type analysis. In this paper, the interface module was specially designed to use ABAQUS on the supercomputer. As a benchmark for the remote CAE, a sheet-forming simulation was perfomed on a PC networked with the supercomputer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.86-92
• /
• 2008

Recently, the use of tubes in the manufacturing of the automobile parts has increased and therefore many automotive manufactures have tried to use hydro-forming technology. The hydro-forming technology may cause many advantages to automotive applications in terms of better structural integrity of the parts, lower cost from fewer part count, material saving, weight reduction, lower spring-back, improved strength and durability and design flexibility. In this study, the whole process of front engine cradle (or front sub-frame) parts development by tube hydro-forming using steel material having tensile strength of 440MPa grade is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Design) to confirm hydro-formability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape on automotive sub-frame by hydro-forming process were carefully investigated. Overall possibility of hydro-formable sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending, preforming and hydro-forming. At the die design stage, all the components of prototyping tools are designed and interference with press is examined from the point of geometry and thinning.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.663-670
• /
• 2016

This paper introduces the concept of the computer-aided engineering(CAE) design method for a bypass valve in a system that is used for the safe lifting of mineral resources in deep-seabed mining. Although the bypass valve has a simple mechanism, its design is very difficult because of various influencing factors. This equipment, which has a complex design process, should be developed by CAE-based design method. The method can perform the design, design verification, and virtual experiment at the same time. In this study, the CAE-based method for the design of the bypass valve has been developed using fluid dynamics, multi-body dynamics, and optimization method.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.166-167
• /
• 2010

최근 전기/전자 제품 개발에서 대용량, 소형화가 이루어지면서 제품 설계에 열유동 및 구조적 문제가 중요한 요소로 등장하였다. 열유동은 발열체와 공기의 흐름에 관련이 있기 때문에 시스템의 구조를 어떻게 설계 하느냐가 방열의 중요한 요소이다. 본 논문에서는 Ansys사(社)의 소프트웨어를 이용하여 연료전지용 PCS에 대한 열유동, 구조 및 강도 해석을 수행하였다. 3D설계는 CAD(Computer Aided Design) 소프트웨어인 Pro Engineer를 이용하였다. 설계된 3D 도면을 Ansys Multiphysics로 불러들여 구조 및 강도해석을 하였고 CFD(Computational Fluid Dynamics) 소프트웨어인 Icepak으로 열유동해석을 수행하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.25-28
• /
• 2002

This paper is concerned with the design of roller profiles in tube/pipe straightener with both methods of Computer Aided Design and Computer Aided Engineering. Design analysis is carried out from two point of view. The one is the research in the minimization of tube pitch which was very important factor in levelling process. In order to minimize tube pitch, profiles of the roller were calculated so that the contact region between roller and tube was maximized. The other is determination of an optimum amount of intermesh for the proper progress without a jam in levelling process. Generally the jamming trouble was casued by excessive amount of intermesh in levelling process. The optimum amount of intermesh was determined through the finite element analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

Lower arm for automobile has been made in steel traditionally. Nowadays steel is being substituted fur aluminum to reduce weight of automobile. Widely applied production method of aluminum component has been casting processes or cast/forging processes. But casting or cast/forging processes have limits of application to parts which is required high strength durability like automotive component. In this research, hot forging process has been adopted to produce aluminum lower arm to ensure required mechanical properties. To reduce production cost, 2 pieces with 1 blow process was developed. Optimization and verification of hot forging process for aluminum lower arm was performed by computer aided engineering using finite volume methods.

• Journal of Mechanical Science and Technology
• /
• v.15 no.8
• /
• pp.1108-1118
• /
• 2001

The purpose of this study is to establish a CAD (Computer Aided Design) system for research and development(R&D) of a new product. In the R&D process of a new product, the design objects are frequently redesigned based on the experimental results obtained with prototypes. The CAD/CAE systems (which is based on computer simulation of physical phenomena) are effective in reducing the number of useless prototypes of a new product. These kinds of conventional CAD/CAE systems do not provide a function to reflect the experimental results to the redesign process, however. This paper proposes a methodology to establish the CAD system, which possesses the engineering model of a designed object in the model database, and refines the model on the basis of experimental results of prototype. The blackboard inference model has been applied to infer model refinement and redesign counterplan by using insufficient knowledge of R&D process of new products.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.91-100
• /
• 2018

The setting of values on door hinge mounting compensation for door assembly tolerance is a constant quality issue in vehicle production. Generally, heuristic methods are used in satisfying appropriate door gap and level difference, flushness to improve quality. However, these methods are influenced by the engineer's skills and working environment and result an increasement of development costs. In order to solve these problems, the system which suggests hinge mounting compensation value using CAE (Computer Aided Engineering) analysis is proposed in this study. A structural analysis model was constructed to predict the door gap and level difference, flushness through CAE based on CAD (Computer Aided Design) data. The deformations of 6-degrees of freedom which can occur in real vehicle doors was considered using a stiffness model which utilize an analysis model. The analysis model was verified using 3D scanning of real vehicle door hinge deformation. Then, system model which applying the structural analysis model suggested the final adjustment amount of the hinge mounting to obtain the target door gap and the level difference by inputting the measured value. The proposed system was validated using the simulation and showed a reliability in vehicle hinge mounting compensation process. This study suggests the possibility of using the CAE analysis for setting values of hinge mounting compensation in actual vehicle production.