• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.338-346
• /
• 2018

Crossed occlusion can be treated either by overdenture and telescopic denture or by placing an implant at the edentulous area to reestablish the support on the occlusion. If alveolar bony support is sufficient and an the environment where an implant is inserted is favorable to restoring the masticatory and aesthetic function of a patient, the implant-supported fixed prosthesis can provide more definitive occlusal support and more aid for other oral functions. In this case report, a patient with a severe residual alveolar bone resorption following the extraction of teeth and who had a crossed occlusion was treated with sinus bone graft and alveolar bone augmentation in order to place the implants at prosthetically position. The definitive restoration was made to reflect the patient's occlusal and aesthetic function using the CAD/CAM double scanning method. Finally, the treatment had the masticatory and aesthetic function adequately restored, which is reported here.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.261-269
• /
• 2006

There is a need to restore the terrain back its natural environment after mining development. It is necessary to compare the original and developing surfaces for post-management and to analyze the terrain change to develop a process for efficient restoration plan. This study analyzes and compares change to the terrain by annual mining development using GIS. Contours digitized with CAD based on photogrammetry are classified into annual data and created by Triangulated Irregular Network (TIN). By producing profiles and cross sections using TIN, many stations are distinguished. As a result of the terrain changes caused by mining development from 2000 to 2003 by operating elevation values each cell converted to raster from TIN, $11,094,460m^3$ are cut and $5,127,968m^3$ are filled up to 46% of cut volume, and annual surface changes of cut and fill area to mining are analyzed to visual and quantitative data. This study is used for the restoration plan and additional mining. And it is expected that this annual change, caused by mining development, can be used to return the terrain close to its original condition for finished mining area.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2005

A nano-stereolithouaphy (NSL) apparatus has been developed for fabrication of microstructures with the resolution of 150 nanometers. In the NSL process, a complicated 3D structure can be fabricated by building layer by layer, so it does not require any sacrificial layer or any supporting structure. A laminated layer was fabricated by means of solidifying liquid-state monomers using two-photon absorption (TPA) which was induced by a femtosecond laser. When the fabrication of a 3D laminated structure was finished, unsolidified liquid-stage resins were removed to develop the fabricated structure by dropping several droplets of solvent, then the polymerized structure was only left on the glass substrate. A microstructure is fabricated by vector scanning method to save the fabrication time. The shell thickness of a structure is very thin within 200 nm, when it is fabricated by a single contour scanning (SCS) path. So, a fabricated structure can be deformed easily in the developing process. In this work, a double contour scanning (DCS) method was proposed to reinforce the strength of a shell typed structure, and a microcup was fabricated to show the usefulness of the developed NSL system and the DCS method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.76-90
• /
• 2011

As most landscape drawings tend to be recorded in electronic format, the need for layer standards is growing. While the categorization system of planting drawings has been progressing, landscape facility drawings are being delayed. So, the purpose of this study was to establish the categorization system of computerized landscape facility drawing documents. In the beginning of this study, it found that the layer categorization system of "The Standards of Construction CALS/EC computerized drawings v1. 1" and "The submit instructions of electronic design documents" are not suitable for the landscape facility drawings. 1,154 drawings drawn by 10 landscape architect offices were used to analyze the current layer categorization status. As a result, it found that "The Standards of Construction CALS/EC computerized drawings v1. 1" were not introduced in landscape facility drawings and 46% of layers were produced indefinitely. The new layer categorization system consisting of 15 facility items was drawn by applying the ISO construction information categorization system. The new layer categorization system is set on the basis of the legal code, landscape design standards, and design guidelines of public institutions. This new layer categorization system is expected to propagate at the landscape architect offices in the early.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.45-52
• /
• 2009

Digital Mammography is an efficient imaging technique for the detection and diagnosis of breast pathological disorders. Six mammographic criteria such as number of cluster, number, size, extent and morphologic shape of microcalcification, and presence of mass, were reviewed and correlation with pathologic diagnosis were evaluated. It is very important to find breast cancer early when treatment can reduce deaths from breast cancer and breast incision. In screening breast cancer, mammography is typically used to view the internal organization. Clusterig microcalcifications on mammography represent an important feature of breast mass, especially that of intraductal carcinoma. Because microcalcification has high correlation with breast cancer, a cluster of a microcalcification can be very helpful for the clinical doctor to predict breast cancer. For this study, three steps of quantitative evaluation are proposed : DoG filter, adaptive thresholding, Expectation maximization. Through the proposed algorithm, each cluster in the distribution of microcalcification was able to measure the number calcification and length of cluster also can be used to automatically diagnose breast cancer as indicators of the primary diagnosis.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.344-349
• /
• 1995

The crystal and molecular structure of the title compound has been determined from 2568 reflections collected on an automatic CAD4 diffractometer using graphite-monochromated $Mo-K\alpha$ radiation. The crystal is monoclinic system, space group $P2_1$ with unit cell dimensions $a=8.756(8)\AA$, $b=25.757(2)\AA$, $c=8.628(1)\AA$, $\beta=99.15(4)^{\circ}$, V= 1,921(2) ${\AA}^3$, Z=4, $D_C=1.336\;g/cm^3$, ${\mu}=1.54\;cm^{-1}\;and\;T=298^{\circ}K$. The final R factor was 0.051 for 2049 reflections over $3{\sigma}(Fο).$ The crystal has two asymmetric molecules in the unit cell. The arrangement of sulfon group was shown a distorted tetrahedron structure and N(6), N(6') atoms were deviated from the least-squares planes of the thiadiazine rings, respectively. The molecular packings in the unit cell are linked by the two intermolecular hydrogen bonds of N-H---O type and van der Waals forces.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.33-46
• /
• 2015

In this paper, we predicts the analog and digital circuit performance of FinFETs that are scaled down following the ITRS(International technology roadmap for semiconductors). For accurate prediction of the circuit performance of scaled down devices, accurate parasitic resistance and capacitance analytical models are developed and their accuracies are within 2 % compared to 3D TCAD simulation results. The parasitic capacitance models are developed using conformal mapping, and the parasitic resistance models are enhanced to include the fin extension length($L_{ext}$) with respect to the default parasitic resistance model of BSIM-CMG. A new algorithm is developed to fit the DC characteristics of BSIM-CMG to the reference DC data. The proposed capacitance and resistance models are implemented inside BSIM-CMG to replace the default parasitic model, and SPICE simulations are performed to predict circuit performances such as $f_T$, $f_{MAX}$, ring oscillators and common source amplifier. Using the proposed parasitic capacitance and resistance model, the device and circuit performances are quantitatively predicted down to 5 nm FinFET transistors. As the FinFET technology scales, due to the improvement in both DC characteristics and the parasitic elements, the circuit performance will improve.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.94-100
• /
• 2014

The purpose of this study was to evaluate the accuracy of digitized elastomeric impression materials of crown abutment, using non-contact white light scanner and virtual three-dimensional superimpositional analysis. The stone models and impressions were digitized white light scanner to create three-dimensional surface models. Stone models were used as CAD reference model (CRM). The resulting point clouds (ASC file) from digitization of impressions using converting software. Discrepancies between the points in the point clouds and CRM were measured by superimpositional software. Mean and standard deviation of values of discrepancies were analyzed by one-way ANOVA and multiple comparison (${\alpha}=0.05$). The mean discrepancy between the impressions for the extra-light body (XLB), light body (LB), and heavy body (HB) group were $5.10{\pm}1.45{\mu}m$, $6.30{\pm}1.87{\mu}m$, $9.80{\pm}1.52{\mu}m$, respectively. The different impression materials affected the digitization of impressions significantly (p<0.05). As a result, digitization of elastomeric impression materials on dental scanner was influenced by material sort.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.349-352
• /
• 2004

4D system has applied to construction project as a management tool after the late 1990's. Various 4D systems have been developed, however they have some problems that should be improved. Especially, the 4D system for civil engineering project needs synthesized 3D model between natural ground condition and physical facility type. It is a different problem comparing with the system for building project. 1'his study suggests an automatically synthesizing methodology between ground triangulate network and design triangulate network. Furthermore the study develops an application methodology of multi-texturing technique defined in virtual reality modeling language (VRML) for skipping the 3D model synthesizing process from the 4D model development processes. The suggested methodology is applied to the prototype of real 4D system. The proposed technique for 3D modeling may be used as an essential methodology for developing 4D system for civil engineering projects.