• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.271-278
• /
• 2018

PURPOSE. The purpose of this in vitro study was to evaluate the effect of abrasive toothbrushing on the surface properties of monolithic computer-assisted design and computer-assisted manufacturing (CAD/CAM) materials stored in food-simulating liquids (FSLs). MATERIALS AND METHODS. Fourty-eight disk-shaped test specimens of each material (Paradigm MZ100/PMZ, Lava Ultimate/LU, Vita Enamic/VE, and Vita Mark II/VMII) with a diameter of 10.0 mm and a thickness of $3.0{\pm}0.05mm$ were prepared. Specimens were divided into 4 subgroups (n=12) and stored in air, distilled water, 0.02 M citric acid, or 75% ethanol/water solution for 7 days at $36.5^{\circ}C$. Then, the specimens were brushed in a multi-station brushing machine under a vertical load of 2.0 N for 3 hours. Surface gloss (GU), roughness (Ra), and hardness (Vickers [VHN]) were measured after storage and brushing simulation. The data sets were statistically analyzed with 2 and 3-way ANOVAs followed by the Tukey's post-hoc comparisons (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the materials concerning the results of surface properties. VMII showed the highest VHN, while PMZ produced the lowest. Storage in FSLs significantly affected the VHN of PMZ and LU. VMII showed the lowest Ra and highest GU irrespective of FSLs and of abrasive toothbrushing. VE, LU, and PMZ produced significant decrease in GU and increase in Ra after toothbrushing. CONCLUSION. Surface properties of monolithic CAD/CAM restorative materials were differently affected by the storage media and abrasive toothbrushing.

• 대한공업교육학회지
• /
• 제33권2호
• /
• pp.259-272
• /
• 2008

목형의 곡면을 수작업으로 제작할 때 많은 경험이 있다 하더라도 정확한 곡면 형상, 좌우대칭 등의 작업에는 상당한 어려움이 따른다. 기계를 사용한 단순한 2차원 목형은 NC 프로그램을 작성하여 간단히 가공할 수 있지만, 복잡한 곡면 형상의 가공은 3차원 CAM s/w, 공구, 재료 등 다양한 변수가 따르기에 축척된 많은 데이터를 필요로 한다. 3차원 곡면 가공 제품 중 제품의 설계 및 디자인 s/w가 다르다면, 데이터의 호환 및 가공 시스템을 구성하기에는 더더욱 어려움이 따른다. 최근 레저에 대한 관심이 증가함에 따라 레저보트 업체에서는 수작업 대신 레저장비에 대한 소비자의 디자인 및 설계제작 요구에 대응하기 위해서 가공 자동화 및 정밀도 향상을 위하여 CAD/CAM 시스템을 이용한 3차원 모델링 및 CNC 공작기계를 사용한 새로운 개념의 플러그 제작 자동화 기술 개발이 필요하게 되었다. 따라서 본 연구는 수작업으로 제작하던 레저보트의 목형을 정밀도와 생산성 향상을 위하여 디자인을 강조한 3차원 디자인 s/w로 디자인하고, 이 디자인 한 데이터를 이용하여 3차원 CAM s/w에서 모델링 한 후, 가공 데이터를 산출하여 정밀가공기계인 머시닝센터로 가공하고자 하는 것이다. 이 연구 결과를 바탕으로 전문계 고교에서도 CAD 및 단순 가공 기술교육에서 벗어나 다양한 디자인으로 된 곡면 가공 수요자의 요구에 대응하기 위한 3차원 모델링과 3차원 정밀 가공 시스템의 교육 및 개발에 도움이 되었으면 한다. 본 연구는 선박의 하단부인 헐(Hull)의 목형인 플러그(plug)를 가공하기 위하여 플러그의 재료, 2차원 도면 형상을 3차원 형상으로의 모델링, 3차원 디자인 모델링, 가공을 위한 CAM, CNC 공작기계를 이용한 가공 기술 등 여러 가지 융합되고 복합적인 기술인 CAD/CAM 시스템을 활용한 모델링 및 플러그 가공 기술을 개발하는 것이다. 학생들에게는 기술개발의 중요성을, 업체에게는 생산성 향상이 주목적이다.

• 구강회복응용과학지
• /
• 제36권2호
• /
• pp.128-137
• /
• 2020

지난 30년동안, CAD/CAM 시스템을 이용한 수복 시스템은 눈부시게 발전하였다. 구치부 수복에서 널리 쓰이던 것과는 달리, 환자와 임상가의 심미적인 요구를 충족해야 하는 전치부 수복 증례에서는 CAD/CAM 시스템을 이용하는데 다소 한계가 있었다. 단일 색조를 가지는 CAD/CAM 수복물에 다양한 색조를 부여하기 위해, A2 lithium disilicate (LS2) 블록에 staining kit를 이용하여 색조 개별화를 시행하여 다양한 색조를 표현하는 예비실험을 시행하였다. 색조 개별화를 진행한 시편을 spectrophotometer를 이용하여 CIE L^*a^*b^* 값을 측정한 후, 임상에서 널리 사용되고 있는 shade guide와 비교하였다. 예비 실험 결과를 바탕으로 2명의 환자의 전치부 수복시, 치아의 부위별 색조 재현과 표면 특성의 개별화를 진행한 증례를 소개한다. 수복물의 해부학적 형태는 CAD/CAM 시스템에서 '복사 및 붙여넣기 기능'과 '거울상 획득 기능'을 이용하여 디자인하였으며, 이 연구에서 소개하는 모든 임상 및 수복물의 기공과정은 진료실 내에서만 이루어졌다.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.32-42
• /
• 1999

Approximate lofting or skinning is one of practical surface modeling techniques well used in CAD and reverse engineering applications. Presented in this paper is a method for approximately lofting a given set of curves wihin a specified tolereance. It is based on refitting input curves simultaneously on a common knot vector and interpolating them to get a resultant NURBS surface. A concept of reducing the number of interior knots of the common knot vector is well adopted to acquire more compact representation for the resultant surface. Energy minimization is newly introduced in curve refitting process to stabilize the solution of the fitting problem and get more fair curve. The proposed approximate lofting provides more smooth surface models and realizes more efficient data reduction expecially when the parameterization and compatibility of input curves are not good enough. The method has been successfully implemented in a new CAD/CAM product VX Vision? of Varimetrix Corporation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 2001

Many various products are manufactured which have sculptured surfaces recently. Constructing surface of these models is required technique called reverse engineering. In reverse engineering, a product which has sculptured surfaces is measured and we create surface model to acquire complete model data of object. Measured point data needs preprocess and sampling. Next a set of point data in a plane fit section curve. At last, surface is generated by fitting to section curves. Here we uses sweep surface. Sweep surface is compatible fitting CAD model to drawing. This paper discusses converting approximation of NURBS surface as a standard surface.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.45.1-45.11
• /
• 2018

Objectives: This study was conducted to evaluate fluoride release and the micro-shear bond strength of resin-modified glass ionomer cement (RMGIC) in casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-remineralized caries-affected dentin (CAD). Materials and Methods: Exposed dentin surfaces of 30 human third molar teeth were divided into 2 equal groups for evaluating fluoride release and the micro-shear bond strength of RMGIC to CAD. Each group was subdivided into 3 equal subgroups: 1) control (sound dentin); 2) artificially demineralized dentin (CAD); 3) CPP-ACP remineralized dentin (remineralized CAD). To measure fluoride release, 15 disc-shaped specimens of RMGIC (4 mm in diameter and 2 mm in thickness) were bonded on one flat surface of the dentin discs of each group. Fluoride release was tested using ion chromatography at different intervals; 24 hours, 3, 5, 7 days. RMGIC micro-cylinders were built on the flat dentin surface of the 15 discs, which were prepared according to the assigned group. Micro-shear bond strength was measured after 24 hours water storage. Data were analyzed using 1- and 2-way analysis of variance and the post hoc least significant difference test (${\alpha}=0.05$). Results: Fluoride detected in solutions (at all intervals) and the micro-shear bond strength of RMGIC bonded to CPP-ACP-remineralized dentin were significantly higher than those bonded to artificial CAD (p < 0.05). Conclusions: Demineralized CAD consumes more fluoride released from RMGIC into the solution for remineralization than CPP-ACP mineralized dentin does. CPP-ACP increases the micro-shear bond strength of RMGIC to CAD.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.942-946
• /
• 1997

In this research,we suggest a virtual machining system that can simulate sutting forces at the stage of design. Cutting forces,here, are modeled form the machanistic model of the ball end milling. To this end, we need undeformed chip thickness which is used for calculating chip load. It is derived form the z-map data of a CAD model. That is, chip load is the height difference between the cutting tool contact point and the workpiece at arbitrary position. The tool contact point is referred from the cutter location. Form the experimental verification, we can simulate machining process effectively to the slot and the side cutting of ball end mill.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1372-1380
• /
• 1993

본 연구에서는 당 연구실에서 개발한 곡면모델러인 CASSET(computer aided sculptured surface engineering tool)에 구현된 트리밍기능을 중심으로 트리밍곡면의 생성방법을 설명하고자 한다. 먼저 CASSET에서 곡선 및 곡면을 표현하는 방법과 곡면 위에 존재하는 곡선의 생성방법 및 곡선간의 교점을 구하는 방법을 설명하고 곡선의 트리밍 절차를 통하여 트리밍곡면의 전반적인 생성절차를 보이겠다.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.47-52
• /
• 1996

The interpolator is very important in CNC machines. This study proposed a parametric curve interpolator(PCI) which can be used for machining any sculptured surface represented in a parametric form and generates commands for tool motion between CAD data points according to given accuracy demands. The proposed interpolator is superior to the existing linear interpolator in accuracy, feed rate and acceleration continuity. Moreover in comparison to the recently developed cubic spline interpolator, the PCI has the capability of handling higher order parametric curves and also ensures precise tracking in the velocity domain. Results from real time simulations and experiments on open architecture CNC machines equipped with the proposed interpolator are presented to show its practical capagility. It is believed that the combination of the proposed interpolator and the open architecture machine controller further advances the area of command generation which is an important aspect of CAD/CAM.