• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.794-801
• /
• 2017

In this paper, we proposed airborne target recognition using multi-channel combining method in DTV-based passive radar. By combining multi-channel signals, we obtained the HRRP with sufficient range resolution. HRRP was obtained by AR method or zero-padding. From the obtained HRRP, we extracted scattering centers by CLEAN algorithm using the gradient descent. We extracted feature vectors and performed target recognition after training neural network using the extracted feature vectors. To verify performance of proposed methods, we assumed frequency bands of three broadcasting transmitters operated in Korea(Mt. Gwan-ak, Mt. Yong-moon, Kyeon-wol-ak) and used full scale 3D CAD model of four targets. Also we compared the target recognition performance of the proposed method with that of using only single-channel of three broadcasting transmitters. As a result, proposed methods showed better performance than using only single-channel at three broadcasting transmitters.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.289-302
• /
• 2006

It is becoming a common trend that many designers work on a very complex assembly together in a collaborative environment. In this environment, every designer should be able to see the whole assembly in a full detail or in a rough shape at least. Even though the hardware technology is being improved very rapidly, it is very difficult to display a very complex assembly at a speed to allow smooth interactions for designers. This problem could be solved if a designer could manipulate his portion of the assembly in a full resolution while the remaining portion of the assembly is displayed in a rough resolution. It is also desired that the remaining portion is converted to the full resolution when needed. To realize this environment, the capabilities to simplify the portions of an assembly and to reset to the original resolution should be added to the current CAD systems. Thus operators realizing multi-resolution on B-rep are proposed in this paper. They are: wrap-around, smooth-out, and thinning operator. Through appropriately applying these operators sequentially, an assembly model of any desired resolution can be easily generated. Of course, the assembly can go back to the finer resolution. In this paper, the data structures and the processes to realize these operators are described and a prototype modeling system with these operators is also demonstrated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.72-78
• /
• 1990

An interactive computer program has been developed to design a pattern and risers for the production of castings of high quality. In our system, the user models the shape of a final product by using the system's modeling capability, a pattern is generated in a three dimensional model by eliminating the holes and adding shrinkage allowances and drafts, the proper riser is created automatically, and they are united together to yield the three dimensional model of the portion of a mold assembly. The mold can be completed after the runners and the gating systems are designed, modeled, and united, which will be described in part 2 of this work. The unique feature of this work is a realization of an automatic design of the pattern and risers by integrating the modeling capabilities and the design equations used in the real practice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1283-1287
• /
• 2003

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore. it becomes a important to handle the huge amount and various types of point data to generate a surface model efficiently. This paper proposes a new triangular mesh generation method using 3D grids. The geometric information of a part can be obtained from point cloud data by estimating normal values of the points. In our research, the non-uniform 3D grids are generated first for feature based data reduction based on the geometric information. Then, triangulation is performed with the reduced point data. The grid structure is efficiently used not only for neighbor point search that can speed up the mesh generation process but also for getting surface connectivity information to result in same topology surface with the point data. Through this integrated approach, it is possible to create surface models from scanned point data efficiently.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.45-50
• /
• 2005

This paper proposed an efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software-based 3D modeler for inspection on machine, and it is interfaced with machine tools via RS232C. The software is composed of two inspection modules; one is touch probe operating module, and the other is laser displacement sensor operating module. The module for touch probe needs the inspection feature extracted from CAD data. The touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of the laser displacement sensor is used to inspect profiles and very small holes. An advantage of this inspection method is the ability to execute on-line inspection during machining or afterward. The efficiency of proposed system which can predict and define the machining errors of each process was verified, so the developed system was applied to inspect a mold-base (cavity, core).

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1882-1889
• /
• 2007

Surveying rocks for engineering aims for prediction of geological feature of the construction site. Conventionally, survey information at outcrops and bore holes are projected to the construction sites, such as tunnel and slopes, and rock properties of the sites are predicted by interpretations of specialists. This system, the "Fracjection", aims to assist the specialist for visualization of the projected fractures from borehole and outcrop survey. The Fracjection accepts the BIPS and outcrop survey data to its database and allows plotting them in AutoCad map. The software also reads elevation data from contours of the topographic map and constructs DEM of the construction sites. With user's guide, it generates 3D excavation sites such as slopes and tunnels at the topographic map. The s/w projects borehole and outcrop surveyed fractures onto the modeled excavation surface and allows analysis of failure criteria, such as plane, wedge, and toppling failures by built-in stereonet function. Projected fractures can further be analyzed for structural homogeneities and rock mass quality. Moving window style correlation comparison of stereonet plots are used for formal analyses, and RQD type counts of the projected fractures are adopted for the latter analyses.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.381-390
• /
• 1999

In this study, a pseudo ship structure data model for the :.hip cargo hold structure based on STEP is proposed. The proposed data model is based on Application Reference Model of AP218 Ship Structure which is the model that specifies conceptual structures and constraints used to describe the information requirements of an application. And the proposeddata model refers the Ship Common Model framework for the model architecture which is the basis for ongoing ship AP development within the ISO ship-building group and the ship product definition information model of CSDP research project for analyzing the relationship between ship structure model entities. The proposed data model includes Space, Compartment. Ship Structural System, Structural Part and Structural Feature of cargo hold. To generate this data model schema in EXPRESS format, ‘GX-Converter’was used which enables user to edit a model in EXPRESS format and convert schema file in EXPRESS format. Using this model schema, STEP physical file containing design data for ship cargo hold data structure was generated through SDAI programming. The another STEP physical file was also generated containing geometry data of ship cargo hold which was extracted and calculated by SDAI and external surface/surface intersection program. The geometry information of ship cargo hold can be then transferred to commercial CAD system, for example, Pro/Engineer. Examples of the modification of the design information are also Presented.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2012

This research was analyzed regarding comparing features of expressions between clothes in movie, , and cyber clothes that were made by Marvelous Designer2 which is a design CAD. This research was studied to experiment an expressing possibility of clothes simulation software which was developed currently. Therefore, we picked clothes that are good at movement and detail in the movie. The dress theory of the renaissance which is the period background of movie, was considered and studied as pattern, silhouette, material, color, detail and animation. The movie's dresses are made with 3D virtual and compared so 3D virtual clothes's benefits and weaknesses can be analyzed. As a result, we found that 3D virtual dress can show the real movie's feature accordingly with current developed IT standard. This will assist a development in fashion industry and become a new indicator for 3D movie clothing.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.15-17
• /
• 2009

The line simplification method based on the turning function is studied in this paper for conversion of ground plan data to geospatial data to update the digital map. This method eliminate vertices effectively by estimating the length and the angle between the vertices based on the turning function which is useful to express the shape of linear feature. As the result, this method shows high shape similarity, high elimination rate of vertices and 100% of satisfaction degree to the drawing rules. Thus this line simplification method is judged to be effective in updating the digital map with ground plans.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2000-2003
• /
• 2002

In this paper, an IC chip of a cell- network type circuit constructed with 1-dimensional chaos circuits is reported. The circuit, is designed by sing switched-current (Sl) techniques. In the proposed circuit, by controlling connections of cells, an S- dimensional circuit (S ＝ 1, 2, 3,…) and a synchronization system can be constructed easily. Furthermore, in spite of faults of a few cells, the circuit can reconstruct above-mentioned systems only to change connections of cells. This feature will open up new vista for engineering applications which are used in a distance place such as space, deep sea, etc. since it is difficult to repair faults of these application systems. To investigate the characteristics of the circuit, SPICE simulations are performed. The VLSI chip is fabricated from the layout design using a CAD tool, MAGIC. The proposed circuit is integrable by a standard 1.2 $\mu\textrm{m}$ CMOS technology.