• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.53-60
• /
• 2004

Recently, there has been a growing tendency to use whole crop rice for feeds as there is an increased rice supply and a decrease in the demand for rice in Korea. Little information, however, is available about the management and utilization of whole crop rice for feeds. This study was conducted to decide the optimum harvest date through examining the plant height, dry matter(DM) yield and feed composition of whole crop rice harvested at different maturity. Field study was established early in May until October 7th on a rice field at Yupori, Sinbuk-yeup, Chunchon, Kangwon-Do. "Ilpum" mutant rice was sown at 52 kg/ha, and N, P and K were applied at 209, 113 and 81 kg/ha, respectively. The rice was harvested at six different mature stages for analysis; booting stage; 17 Aug., milk-ripe stage; 27 Aug., dough stage; 7 Sep., yellow ripe stage; 17 Sep., dead ripe stage; 27 Sep. and full ripe stage; 7 Oct. Plant height was 77 cm in booting stage (P<0.05) which was lower when compared to the other stages among which the heights did not differ with average range of 93∼97 cm. The highest dry matter yield was observed in yellow ripe stage (22.8 T/ha), which was followed by dead ripe stage (19.3 T/ha), full ripe stage (19.3 T/ha), and dough stage (15.1 T/ha). Crude protein (CP) and Neutral detergent fiber (NDF) concentrations consistently decreased with maturity. The highest concentrations of CP and NDF were obtained in booting stage with 9 and 73.6%, respectively (P<0.05), and lowest in full ripe stage with 5.8 and 64.6%, respectively (P<0.05). The concentration of total digestible nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering dry matter yields, feed compositions and TDN concentrations.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2011

Arsenic is one of the most abundant contaminant found in waste mine tailings, because of it's carcinogenic property, the countries like United states of America and Europe have made stringent regulations which govern the concentration of arsenic in drinking water. The current study focuses on different treatment methods for removal of arsenic from waste water. Treatment method the high strength arsenic waste water is treated with Fe(III)-ettringite by co-precipitation method. Number of experiments were carried out to decide the optimal dosage of Fe(III)-ettringite to treat arsenic waste water. The Fe(III)-ettringite was synthesized by taking appropriate equivalent ratios of calcium oxide and ferric chloride in proportion to the arsenic. The best removal efficiencies of 94% were observed at a As/(Ca: Fe) ratio of 1:3. The maximum removal of arsenic was observed in pH range of 12. But as the pH increases the arsenic removal efficiency decreases as portlandite is formed in the pH above 12. The analysis of surface of precipitate conform the needle like structure of ettringite. This treatment technique has promising features such as, the chemicals required in the treatment as well as the sludge generated can be reduced. The operating pH range is in alkaline region which is advantageous over traditional treatment process which has lower pH. Also the co-precipitation not only helps in removal of arsenic but also heavy metals.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.46.3-47
• /
• 2021

Recently a multilayer spectral inversion (MLSI) model has been proposed to infer the physical parameters of plasmas in the solar chromosphere. The inversion solves a three-layer radiative transfer model using the strong absorption line profiles, H alpha and Ca II 8542 Å, taken by the Fast Imaging Solar Spectrograph (FISS). The model successfully provides the physical plasma parameters, such as source functions, Doppler velocities, and Doppler widths in the layers of the photosphere to the chromosphere. However, it is quite expensive to apply the MLSI to a huge number of line profiles. For example, the calculating time is an hour to several hours depending on the size of the scan raster. We apply deep neural network (DNN) to the inversion code to reduce the cost of calculating the physical parameters. We train the models using pairs of absorption line profiles from FISS and their 13 physical parameters (source functions, Doppler velocities, Doppler widths in the chromosphere, and the pre-determined parameters for the photosphere) calculated from the spectral inversion code for 49 scan rasters (~2,000,000 dataset) including quiet and active regions. We use fully connected dense layers for training the model. In addition, we utilize a skip connection to avoid a problem of vanishing gradients. We evaluate the model by comparing the pairs of absorption line profiles and their inverted physical parameters from other quiet and active regions. Our result shows that the deep learning model successfully reproduces physical parameter maps of a scan raster observation per second within 15% of mean absolute percentage error and the mean squared error of 0.3 to 0.003 depending on the parameters. Taking this advantage of high performance of the deep learning model, we plan to provide the physical parameter maps from the FISS observations to understand the chromospheric plasma conditions in various solar features.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.7-15
• /
• 2003

The characteristic of the quality of stream water and the riparian vegetation during rice cultivation in the rural area of the eastern Jeonnam province was surveyed from April to November, 2000. The water quality of the streams during rice cultivation was variable. The pH of these water bodies ranged from $6.5{\sim}8.3$. Electro conductivity (EC) at each water body ranged from $162{\sim}4,910\;{\mu}S/cm$ for Beogyo-cheoa $114.7{\sim}286.6\;{\mu}g/cm$ for Boseong-cheon, $74.8{\sim}147\;{\mu}S/cm$ for Songgwang-cheon, and $61.6{\sim}82.1\;{\mu}S/cm$ for Isa-cheon. Total nitrogen and other parameters (K, Ca, Mg, Na, $Cl^-$, SS) were higher at May (Boseong-cheon) through June (Songgwang-cheon, Isa-cheon) during the transplanting season than these same parameters at August October and November. Thirty weed species of sixteen families were found in the survey areas of Songgwang-cheon, Boseong-cheon Isa-cheon and Beolgyo-cheon. Nine annual weeds, four biennial weeds, and seventeen perennial weeds were found, several different life forms were identified. Of those species three were submerged, two were free floating, five were emerged, and twenty were water-side weeds.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.185-197
• /
• 2009

For utilizing Cattail pollen as a raw material for functional foods, the nutrients such as free sugar, free amino acid, fatty acid composition, flavonoid content, and the biological activity within Cattail pollen were measured. The results of proximate analysis within Cattail pollen included the following readings: 12.7-13.2% of moisture, 15.7-17.8% of crude protein, 1.3% of crude fat, 7.5-7.7% of free sugar, 13.7-18.6% of crude fiber, 3.4-4.9% of ash, and 49.7-55.9% of nitrogen free extracts. The composition of free amino acids consisted of 1.923% of T. orientalis, 0.907% of T. angustata, and 0.333% of T. latifolia, which were measurements that varied significantly among different species. However, all species showed considerable portions of GABA alanine, glutamic acid, and proline. Specifically, it was shown that the GABA composition, which is known for increasing immunity while simultaneously lowering blood pressure, exceeded 50%. Therefore, this result implies that Cattail pollens have potential as a powerful utilization for functional foods. The composition of the fatty acids mainly consisted of linoeic, palmitic acid, oleic acid, and linolenic acid, and didn't show many variances across different species. Also, the total contents of unsaturated fatty acid were particularly high with a measured ratio of 67.2-76.0% value. Mineral in Cattail pollen was composed of 0.354-0.492% of K, 0.0516-0.0546% of Mg, 0.045-0.0486% of Ca, and 0.0101-0.0204% of Na. Among the Cattail pollens known as anti-oxidants, flavonoid contains 0.169-0.186% of quercetin, and therefore is the largest constituent followed by rutin making up a measurement of 0.0094-0.0147%. For the purpose of the study, the Cattail pollen and its extracts were fed to SC class rats for a span of 4 weeks. Then, the DPPH radical scavenging activity was measured from the tested rats'serums and the results showed significant variances. Also, the results indicated that the cholesterol and glucose levels in the blood were decreased which in turn led to the conclusion that the cattail pollen can help hyperlipidemia and diabetic treatments.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.575-589
• /
• 2009

Groundwater has been extracted for irrigation in Sacheon-Hadong area, which is close to the South Sea. We analyzed chemical components of groundwater to examine the effects of seawater intrusion and agricultural activities in the study area. Most groundwater samples displayed the Na/Cl concentration ratios similar to that of seawater (0.55) with an increasing tendency of electrical conductivity ($227-7,910\;{\mu}S/cm$) towards the coast. In addition, statistical interpretation of the cumulative frequency curves of Cl and $HCO_3$ showed that 30.1% of the groundwater samples were highly affected by seawater intrusion. Groundwaters in the study area mostly belonged to the Ca-Cl and Na-Cl type, demonstrating that they were highly influenced by seawater intrusion and cation exchange. The result of oxygen-hydrogen isotope analysis demonstrated slightly higher $\delta^{18}O$ ((-8.53)-(-6.13)‰) and ${\delta}D$ ((-58.7)-(-43.7)‰) comparing to mean oxygen-hydrogen isotope ratios in Korea. As a result of nitrogen isotope analysis, the $\delta^{15}N-NO_3$ values ((-0.5)-(19.1)‰) indicate two major sources of nitrate pollution (organic nitrogen in soil and animal and human wastes) and mixed source of the two. However, denitrification may partly contribute as a source of nitrogen. According to factor analysis, four factors were identified among which factor 1 with an eigenvalue of 6.21 reflected the influence of seawater intrusion. Cluster analysis indicated the classification of groundwater into fresh, saline, and mixed ones.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.218-227
• /
• 2015

A prerequisite for precise quantification of nanomaterials contained in environmental samples is to prepare suitable preservation conditions of samples. This study was initiated to suggest preservation conditions of aqueous samples for analyses of metal nanomaterials. Variation in the size of silver nanomaterial (cit-AgNP) was observed according to change in various conditions, such as pH, electrolyte concentration, temperature, nanomaterial concentration, and time. Aggregation of AgNP was characterized for each environmental condition, and finally proper preservation conditions of samples were proposed based on experimental results on AgNP aggregation. In addition, the preservation period of sample was computed by the doublet time of AgNP. The results indicate that the aggregation rate of cit-AgNP was close to 0 at the conditions of pH of ${\geq}7$, electrolyte ($Ca(NO_3)_2$) concentration of ${\leq}3mM$, temperature of $4^{\circ}C$, and cit-AgNP concentration of ${\leq}2mg/L$. Furthermore, the experimental results on doublet time of cit-AgNP suggest that maximum preservation period was evaluated to be 15.79~17.53 days when the concentration of 100 nm cit-AgNP is assumed to be $1{\mu}g/L$ which is considered as an environmentally-relevant concentration of engineered nanomaterials. Our results suggest that samples should be preserved at $4^{\circ}C$ and analyzed within 2 weeks.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.1
• /
• pp.59-68
• /
• 2002

Chemical composition, mineral compounds, cellular constituents, digestibility for dry matter, total digestible nutrients, and tannin constituents were investigated to evaluate feed value for oak and pine browses to use effectively browses as forest by products. The results of this study were as follows : Crude protein was 6.00∼7.89% for oak browse and 5.15∼6.06% for pine browse sampled through July to October, It gradually decreased in oak browse but not in pine browse as the growth of tree was progressed stages. Crude fat content of oak and pine browse were 1.90∼2.68% and 6.30∼6.33%. Crude fiber content was 33.3∼35.2% for oak browse and 33.7∼34.8% for pine browse and they tended to increase according to the growth stage of trees. Crude ash was 3.13∼2.78% for oak browse and 2.11 ∼1.93% for pine browse, respectively. Ca, Mg, Mn and Cu content were higher in oak browse than those in pine browse, but P, K, Na, Fe, and Zn content were similar each other. Mineral contents were decreased as the growth of tree was progressed(P<.05). Acid detergent fiber content of pine and oak browse were 47.7∼52.0% and 46.1∼48.1%, and they increased as the tree grew. Neutral detergent fiber content of pine and oak browse were 64.1∼67.9% and 65.0∼66.5%. NDF content was increased according to the tree growth in pine browse but it was the same in oak browse(P<.05). in vitro digestibility of dry matter was 51.7∼48.4% for pine browse that decreased according to the tree growth(p<.05) and 53.0∼5l.4% for oak browse. Total digestible nutrients of oak browse was 50.9∼52.4% and that of pine browse was 47.7∼51.1% which decreased as the tree grew. Oak browse showed the same relative feeding value(RFV) as pine browse, and it decreased as the growth of tree was progressed(P<.05). Tannin contents was 2.96% for oak browse, 6.27% for pine browse. Tannin contents decreased when browses were dried.

• Food Science and Preservation
• /
• v.13 no.6
• /
• pp.720-725
• /
• 2006

This study was conducted to investigate extracting solution effect on the chemical compositions in different parts of Korean mountain Ginseng. Water, 80% EtOH and 80% MeOH are used as extraction solutions, and extracting conditions were 2 hr at $85^{\circ}C$ in water bath. The Brix(%) of the extract were ranged from $0.42{\sim}22.58%$, 80% EtOH extract for leaf is the highest level as 22.58%. The pH ranges of the extracts were $4.43{\sim}7.41$ and brown color of the extract was the highest with 1.803 in 80% EtOH extract for leaf, respectively. In case of hunter's color value of the extract, L value is the highest with 24.35 in 80% EtOH extract of seed, a and b value were the highest with 0.41 in 100% water extract of leaf and 3.69 in 80% MeOH extract of stem. Sucrose is the major free sugar of the extinct it highest content with 3673 mg% in 80% MeOH extract of mot and fructose is the highest with 1897 mg% in 80% MeOH extract of leaf, Major organic acids are identified as malic, tartaric and citric acid, and total organic acid content is the highest with 5,254 mg% in 80% MeOH extract of leaf and 1,527 mg% in 80% EtOH extract of leaf, The extracted major minerals ate P and K, P content highest with 15,563 ppm in 100% water extract of stem, K is 4,952 ppm in 80% MeOH extract of leaf, and Ca is the highest with 3,052 ppm in 1011% water extract of leaf. These results suggest that extracting solvent (80% MeOH) is concerned with the extract preparation of Korea Mountain Ginseng.

• Journal of Plant Biology
• /
• v.38 no.1
• /
• pp.95-105
• /
• 1995

Complete microsporogenesis of Hibiscus syriacus L. were carried out employing LM, TEM, and SEM to investigate the pollen ontogeny that undergoes considerable structural differentiation. The process first began with several cell diYisions in the anther primordium that produces 3 different tissues of epidennal, archesporial, and connective tissues. Only archesporial tissue involved further differentiation into the tapetum and formation of reproductive cells, pollen mother cells (PMC). The tapetum and PMC were closely associated with each other structurally and metabolically by exhibiting numerous plasmodesmata, mitochondria, and many small vacuoles in their dense cytoplasm. A callosic wall began to surround the PMC while meiosis took place in the PMC to produce 4 microspores. When thick callose encircled each microspore as a frame, the sporodenn development initiated from the plasma membrane of a pollen grain in a tetrad. The first fonned sporoderm layer was bacules and tectum of sexine that originated from the plasma membrane. After the dissolution of a callose, further development Qf sporoderm continued in the order of nexine 1, nexine 2, and intine layer. The nexine layer was thicker (ca. $2-3.5\;\mu\textrm{m}$) than the intine layer whose thickness was about $0.9-1.5\;\mu\textrm{m}$. Upon completion of the sporoderm development, that is after intine formation, spines and apertures of pollen surface ornamentation initiated from the tectum. Spines were dimorphic, about $4-9\;\mu\textrm{m}\;an;15-20\;\mu\textrm{m}$ in length, and no basal cushion was detected. The mature pollen grains ranged $100-200\;\mu\textrm{m}$ in diameter, but their average was about $170\;\mu\textrm{m}$. About 120 spines were observed over the spheroidal pollen surface. Apertures were simple punctures of $2-3\;\mu\textrm{m}$ in diameter and about 50 apertures were arranged somewhat helically over the surface. Comparing such features of form and size of the pollen, sporodenn sculpture and structure, and aperture and spine conditions with known evolutionary trends in the genus Hibiscus, Hibiscus syriacus seemed to possess many advanced features in the sporodenn differentiation.iation.