• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.667-676
• /
• 2004

Yogurt was prepared from skim milk added with 1, 2, 4 or 6% of rice- or skim milk powders and commercial lactic acid bacterial starters. Changes in pH, titratable acidity, viable cell counts, viscosity, organic acid contents and carbohydrates during fermentation were monitored and its sensory evaluation was also performed. The optimum level of additives such as rice- and skim milk powders for yogurt manufacture was selected. Fermentation properties of yogurt added with rice and skim milk powders were studied. The control yogurt reached pH 4.5 after 10 hours of fermentation, whereas the samples added with 4 or 6% rice powders reached pH 4.5 in 6 hours and those added with skim milk powder reached in 8 hours. After 4 hours of fermentation, the control yogurt reached a titratable acidity at 1.0 %, whereas other samples exceeded 1.0%. After 4 hours of fermentation, the viable cell counts in the samples added with 4% rice powders were the highest. At the level of 4% rice powders, the curd viscosity decreased. Except for the sample added with 6% skim milk powders, all the samples produced higher lactic acid during fermentation, and galactose level in yogurt was the highest when added with 4% rice powder or 6% skim milk powder. In overall sensory evaluation using 5 parameters, the sensory scores of all the yogurts were not significantly different. However, the sample added with 4% skim milk powders was the best for color and overall acceptability. The sample added with 4% rice powders was the best for the flavor and texture. From this experiment, the optimun level of additives such as rice or skim milk powders was selected to be 4%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.311-318
• /
• 2005

Transparency on the Total System Performance Assessment (TSPA) is the key issue to enhance the public acceptance for a permanent high level radioactive repository. To approve it, all performances on TSPA through Quality Assurance is necessary. The integrated Cyber R&D Platform is developed by KAERI using the T2R3 principles applicable for five major steps in R&D's. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. It is composed of FEAS (FEp to Assessment through Scenario development) showing systematic approach from the FEPs to Assessment methods flow chart, PAID (Performance Assessment Input Databases) showing PA(Performance Assessment) input data set in web based system and QA system receding those data. All information is integrated into Cyber R&D Platform so that every data in the system can be checked whenever necessary. For more user-friendly system, system upgrade included input data & documentation package is under development. Throughout the next phase R&D, Cyber R&D Platform will be connected with the assessment tool for TSPA so that it will be expected to search the whole information in one unified system.

• Applied Biological Chemistry
• /
• v.15 no.2
• /
• pp.169-173
• /
• 1972

In five varietes of Citrus junos sieb grown in different area in Korea, the general components, total acids and inorganic components were calculated and compared with one other. In the orchard soils, the physical and chemical properties were studied. The results are summarized as follow: 1. Generally, the rind was weighter than tile flesh compared with the other fruits and the proportion of the rind was 49%. 2. Total contents of organic acids in rind and flesh were 12.29me and 39.79me respectively. 3. The order of the contents of inorganic components in the flesh and rind was $CaO>K_2O>MgO>P_2O_5>SO_4$ 4. The contents of crude protein and crude fat were increased with those of MgO and $SO_4$ in fruits. 5. The quantity of protein in the soil seed to influence greatly in rind formation not only in citrus fruits but also Citrus junos sieb. 6. In growing Citrus junos sieb, C.L. seemed to he the most adequate soil. 7. The pH range of the soil was from 5.05 to 7.20 generally. 8. The contents of crude protein and crude fat in citrus fruits seemed to be increased with those of organic material and total-nitrogen in the soil.

• Korean Journal of Ecology and Environment
• /
• v.49 no.1
• /
• pp.31-41
• /
• 2016

Deutzia paniculata is an endemic species to the Korean Peninsula. Despite of importance for conservation, the population structure and habitat characteristics of D. paniculata have not been determined yet. We analyzed the ecological characteristics of the species based on the literature review and field survey. Field survey was conducted on May to October 2014 during which 11 quadrats of size $15{\times}15m$ were studied in six regions. Each of the quadrats were further divided into $5{\times}5m$ small quadrats and population characteristics were recorded. The population and habitat characteristics were analyzed, including species abundance (density and coverage), demographic attributes (flowering rates and fruiting plants), vegetation (structure, species composition), light availability (transmitted light and canopy openness) and soil characteristics (temperature and humidity). We found that D. paniculata mainly distributed in Gyeongsangdo (including Taebaek in Gangwondo) along a broad elevational range of 290~959 m (mean: 493 m) above sea level. In preferred habitat the species grows within the slope range of $7^{\circ}$ and $35^{\circ}$ with the average of $16^{\circ}$. D. paniculata was generally distributed on talus deposits and low adjacent slopes. The average number of individual plants per small quadrat was 12.5 with the mean density $0.5stems\;m^{-2}$. The vegetative reproduction was frequent in D. paniculata and mean flowering rate was as low as 15%. Altogether 138 taxa were found in whole observation area with the dominant tree species mainly spring ephemerals, such as Cornus controversa (importance value: 25.5%) and Fraxinus rhynchophylla (importance value: 15.8%). Although, C. controversa usually grows on steep slopes and F. rhynchophylla mostly distributed at high-altitudes, however, both species distributed in disturbed environments and among talus deposits. Thus based on our results, we concluded that D. paniculata is a disturbance-prone species, primarily existing in habitats subjected to natural disturbances, such as floods. The species occurs less at anthropogenically disturbed sites, thus there is no apparent threat to the populations and habitat of D. paniculata.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.301-307
• /
• 2017

A new barley(Hordeum vulgare L.) cultivar 'Dachung' having high forage yielding and good silage quality was developed at National Institute of Crop Science, RDA in 2015. This cultivar was derived from a cross of the 'Sunwoo' and 'Keunalbori1ho' in 2002. And it's promising line showed both high yield and lodging resistance through the preliminary and advanced yield trials(PYT, AYT) at Iksan from 2010 to 2012. It was designated as the 'Iksan479'. 'Iksan479' was conducted to regional yield trials(RYT) in six locations around Korea for three years from 2013 to 2015. And it was released as the name of 'Dachung'. It has erect plant type, growth habit of IV and green leaf. In the paddy field its heading date was April 24 and maturing date was May 26, same day with 'Youngyang'. Plant height of 'Dachung' was 99cm. Dachung's spikes per $m^2$ was 625. It has high rate of leaf blades, resistance to BaYMV(Barley Yellow Mosiac Virus) and better winter hardiness than that of 'Youngyang'. The average dry matter of 'Dachung' was about $11.9ton\;ha^{-1}$ in paddy field. And average feed quality of 'Dachung' was 9.0% of crude protein content, 31.3% of ADF (Acid Detergent Fiber), 54.4% of NDF (Neutral Detergent Fiber), 64.0% of TDN (Total Digestible Nutrients). 'Dachung' had grade I of silage quality. This cultivar would be suitable for the area above the daily minimum temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.51-60
• /
• 2009

The purpose of this study was to perform quantitative comparisons of water permeable zones in both the adhesive and the hybrid layer before and after thermo cycling in order to assess the integrity of the bonding interface. Twenty eight flat dentin surfaces were bonded with a light-cured composite resin using one of four commercial adhesives [OptiBond FL (OP), AdheSE (AD), Clearfil SE Bond (CL). and Xeno III (XE)]. These were sectioned into halves and subsequently cut to yield 2-mm thick specimens; one specimen for control and the other subjected to thermocycling for 10,000 cycles. After specimens were immersed in ammoniacal silver nitrate for 24 h and exposed to a photo developing solution for 8 h, the bonded interface was analyzed by scanning electron microscopy (SEM) and wavelength dispersive spectrometry (WDS) at five locations per specimen. Immediately after bonding. the adhesive layer of OP showed the lowest silver uptake, followed by CL, AD. and XE in ascending order (p < 0.0001); the hybrid layer of CL had the lowest silver content among the groups (p = 0.0039). After thermocycling, none of the adhesives manifested a significant increase of silver in either the adhesive or the hybrid layer. SEM demonstrated the characteristic silver penetrated patterns within the interface. It was observed that integrity of bonding was well maintained in OP and CL throughout the thermocycling process. Adhesive-tooth interfaces are vulnerable to hydrolytic degradation and its permeability varies in different adhesive systems, which may be clinically related to the restoration longevity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.30-39
• /
• 1989

Forage productivity of cropping systems of rye - silage corn, silage corn - oats, silage corn - rape was studied in the south-eastern part of Korea where rice black-streaked dwarf virus(RBSDV) infection of corn are severe. Rye(cv. Paldanghomil) was planted on Oct. 20 of 1986 and harvested 10 times from April 5 to May 5 at the 5-day intervals in 1987, corn (cv. Suweon 19 and Jinjuok) was planted 5 times from April 5 to May 15 at the 10-day intervals in 1987, and oats(cv. Megwiri) and rape (cv. Velox) were planted 4 times from Sept: 4 to 25 at the 7-day intervals and harvested 4 times from Nov. 10 to Dec. 10 at the 10-day intervals in 1987. Considering yield, nutrition value, and in vitro dry matter digestibility (IVDMD), forage productivity of the cropping systems was compared. As harvesting time of rye delayed, plant height, dry matter(DM) yield, percent DM, crude fiber, and digestible DM yield increased, but crude protein, crude fat, and IVDMD decreased. However, nitrogen free extract was not different among the harvesting dates. As planting date of corn delayed, RBSDV infection rate increased. but DM yield of silage decreased. However, silage yield of Jinjuok was higher, but RBSDV infection rate was lower compared with Suweon 19 at all planting dates. DM yield of oats and rape decreased as planting date delayed. However, at Sept. 4 and 11 plantings yield of oats on Nov. 10 was much lower than that of rape, but the differences in yield between two crops decreased with delayed harvesting, and yield was similar on Dec. 10. A cropping system harvesting rye around April 20 and followed by planting corn in late April was best among the rye-corn systems considering yield and nutrition value of both crops. However, among the corn-oats or corn-rape cropping systems early April planting of corn and followed by early Sept. planting of oats or rape showed best results with similar yield potential of the best rye-corn cropping system.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.255-262
• /
• 2006

The purpose of this study is to investigate the effects of vitrification in open pulled straws (OPS) methods on in vitro survival ability of porcine embryos. For in vitro maturation of immature oocytes, the porcine ovaries were collected from local slaughter-house. The cumulus-oocytes complexes were aspirated from 2 to 6 mm follicles. The collected oocytes were cultured for in vitro maturation in NCSU-23 medium with 5 mM hypotaurine, 0.57 mM cysteine, 10% porcine follicle fluid, 10 IU/ml PMSG and 10 IU/ml hCG for $21{\sim}22$ hrs. Then, the oocytes were more cultured $21{\sim}22$ hrs in vitro maturation in medium removed hormones. The frozen-thawed spermatozoa were washed by centrifugation 2 times for 10 min at 1,500 rpm in D-PBS with 5.56 mM glucose, 0.33 mM Na-pyruvate, 100 IU/ml penicillin, $100 {\mu}g/ml$ streptomycin and 4 mg/ml BSA. The fertilization medium used mTBM with 2 mM caffeine and 2 mg/ml BSA and adjusted to a pH of 7.2 to 7.4. The final concentration of spermatozoa was adjusted to $2.5{\times}10^6$cells/ml motile sperm during fertilization in vitro. At 8 hrs after insemination, the oocytes were transferred into NCSU-23 medium with 5.0 mM hypotaurine, 4 mg/ml BSA and 10 ng/ml EGF and cultured for 7 days. When the blastocysts of different stages were frozen-thawed by OPS methods, the proportions of embryos with normal morphology were significantly (p<0.05) higher in embryos frozen-thawed at expanded blastocyst stage (38.9%) than in early blastocyst stage (28.3%). On the other hand, the proportions of embryos damaged after frozen-thawing were significantly (p<0.05) higher in embryos frozen at early blastocyst stages than in expanded blastocyst stage. In another experiment, the normal embryos morphology after frozen- thawing were further cultured for 48 hrs. After culture, the proportions of embryos hatched were 6.7, 20.0 and 33.3% for embryos frozen-thawed at early blastocyst, mid-blastocyst and expanded blastocyst stages. These finding indicate the possible broader application for OPS methods, as frozen-thawed embryos may be accompanied by developmental stage according to requirements of the survival ability after freezing of blastocyst stage in the pig.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.442-448
• /
• 2012

Many outbreaks of food-borne illnesses have been associated with the consumption of fresh vegetables and fruits contaminated with food-borne pathogens. Contaminated medium, manure and irrigation water are probable vehicles for the pathogen in many outbreaks. The aim of this study was to determine the potential transfer of Escherichia coli and Bacillus cereus from medium and soil fertilized with contaminated compost or irrigation with contaminated water to the edible parts of lettuce. Moreover, survivals of the two pathogens on lettuce contaminated medium, soil and irrigation water were estimated. Lettuce seeds were planted in medium contaminated with 7.5 log colony forming unit (CFU)/g of E. coli and B. cereus. Seedlings grown in the contaminated medium were transplanted in soil fertilized with contaminated pig manure compost or uncontaminated soil. Contaminated irrigation water with E. coli and B. cereus at 8.0 log CFU/mL was applied only once on the plant by sprinkle irrigation and surface irrigation. Although E. coli and B. cereus in medium and sprouted lettuce after planting seeds were reduced as time passed, these pathogens survived in seedling raising stage for extended periods. The numbers of E. coli and B. cereus in lettuce grown on contaminated soil were detected over 4.0 log CFU/g for 21 days. The numbers of E. coli and B. cereus in lettuce applied by sprinkle irrigation were higher than those of surface irrigation by 5.0 log CFU/g. Our results indicated that contaminated medium, soil and irrigation water can play an important role in the presence of food-borne pathogens on vegetables.