• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.215-215
• /
• 2011

The bonding configuration and adsorption stability of alanine and leucine adsorbed on Ge(100)-2${\times}$1 surface were investigated and compared using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The bonding configuration, stability, and adsorption energies were evaluated for two different coverage levels. In both cases, the C 1s, N 1s, and O 1s core-level spectra at a low coverage (0.30 ML) indicated that the carboxyl and amine groups participated in bonding with the Ge(100) surface in an "O-H dissociated-N dative bonded structure". At high coverage levels (0.60 ML), both this structure and an "O-H dissociation bonded structure" were present. As a result, we found that alanine adsorbs more easily (lower adsorption energy) than leucine on Ge(100) surfaces due to less steric hindrance of side chain.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 1984

The computer program DASH(Direct Analysis of Ship's Hull), based on the direct calculating procedure as proposed at the 4th ISSC(1970), was developed. The DASH program is designed by the following calculation procedure: 1) Derivation of the design wave loads through the ship motion analysis based on the strip theory. 2) Stress analysis of the hull girder based on the 7-degree of the freedom beam theory including the warping torsion effect. 3) Long-term prediction of the stresses based on the statistical approach using sea-spectrums and ocean wave data in the ship's route. An example calculation was performed for the purpose of a demonstration of the present approach on the 16,200 DWT Oil Tanker. The results are discussed and compared with the conventional method.

• Archives of Pharmacal Research
• /
• v.8 no.2
• /
• pp.91-98
• /
• 1985

Dependence of the flow behavior of aqueous suspension of Young-Il bentonite on the concentration and the type of electrolytes was studied. Viscosity measurements were made was Rion Viscotester, using No. 3 rotor at 62.5 R. P. M. at 25.deg.C. As electrolyte concentration increased, the apparent viscosity was observed to increase. Changes in viscosity were in general agreement with predicted results based on the Hofmeister sequence and the Schulze-Hardy rule. The observed electrolyte effect on the apparent viscosity was discussed in terms of the Verwey-Overbeek theory.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.3
• /
• pp.3-8
• /
• 1984

It is shown that Paul and Jones' Rule of Mixtures modified by Smith and Cox's theory can be used for the fiber-reinforced, sulfur-based composites, when the constant for the linear regression equation is given. The computation results, programmed by Hewlett Packard 75C (HP 75C) using math rom pack for the linear regression form, expressed as $E_c=\frac{1}{3}aE_fV_f+bE_mV_m$, turn out to be a=3.27-3.54 b=-2.47~-2.80. This results indicate that the factors such as density of fiber mat and the amount of matrix used have nothing for affecting the numerical value of the constants a and b of the linear regression form. Conclusively this results also show that the Paul and Jones' Rule of Mixtures which has been used for the composites made by randomly-oriented long fiber can also be used for the composites made by short fiber with the same fiber orientation such as wood and lignocellulosic fibers.

• Structural Engineering and Mechanics
• /
• v.11 no.2
• /
• pp.123-132
• /
• 2001

An improved version of the Element-free Galerkin method (EFGM) is presented here for addressing the problem of transverse shear locking in shear-deformable beams with a high length over thickness ratio. Based upon Timoshenko's theory of thick beams, it has been recognized that shear locking will be completely eliminated if the rotation field is constructed to match the field of slope, given by the first derivative of displacement. This criterion is applied directly to the most commonly implemented version of EFGM. However in the numerical process to integrate strain energy, the second derivative of the standard Moving Least Square (MLS) shape functions must be evaluated, thus requiring at least a $C^1$ continuity of MLS shape functions instead of $C^0$ continuity in the conventional EFGM. Yet this hindrance is overcome effortlessly by only using at least a $C^1$ weight function. One-dimensional quartic spline weight function with $C^2$ continuity is therefore adopted for this purpose. Various numerical results in this work indicate that the modified version of the EFGM does not exhibit transverse shear locking, reduces stress oscillations, produces fast convergence, and provides a surprisingly high degree of accuracy even with coarse domain discretizations.

• The Journal of Fisheries Business Administration
• /
• v.14 no.1
• /
• pp.44-56
• /
• 1983

This study is attempted to serve the fundamental theory for ‘The reorganization of Korean coastal and adjacent water fishery.’ On the Korean coastal and adjacent water fishery where one species stock is catched by multiple fisheries, traditional analysis is not suitable, as analyzing through adjusting the heterogeneous fishing effort among the fisheries to an unit having same fishing strength. Therefore, this study presents the ‘Multi-Variable Model’, adopting fishing effort from each fishery as independent variable, respectively, in order to analyze the quantitative fluctuation of fishery resource not with fishing strength but with amount of fishing effort, measured by the unit of each fishery. For the sake of simplication, this study assumes that one species is catched by two fishery, premise two assumption. 1) Every fishery has not the selectivity in fishing 2) The promotion of fishing efficiency is accomplished in the same speed. Resource equilibrium equation of each fishery is; $$CPUE_1=\frac{Y_1}{E_1}=a_1+ b_1\cdot E_1+c_1\cdot E_1$$ $$CPUE_1=\frac{Y_1}{E_1}=a_1+ b_1\cdot E_1+c_1\cdot E_1$$ Sustainable yield equation is; $$SY_1=a_1\cdot E_1+\cdot b_1E{_1}{^2}+c_1\cdot E_1\cdot E_1$$ $$SY_1=a_1\cdot E_1+b_1\cdot E_1\cdot E_1+c_1\cdot E{_1}{^2}$$ This study is rudimentary, hereafter, refinemental analysis will be supplemented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.318-322
• /
• 1997

The (Sr$_{l-x}$.Ca$_{x}$)TiO$_3$(0.05$\leq$x$\leq$0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[$^{\circ}C$] in a reducing atmosphere($N_2$gas). After being fired in a reducing atmosphere, metal oxides, CuO, was painted on the both surface of the specimens to diffuse to the grain boundary. They were annealed at 1100[$^{\circ}C$] for 2 hours and cooled to room temperature. The grain boundary was composed of the continuous insulating layers. The capacitance changes slowly and almost linearly in the temperature region of -30~+85[$^{\circ}C$]. The capacitance characteristics appears a stable value within $\pm$10[%]. The conduction mechanism of the specimens observed in the temperature range of 25~125[$^{\circ}C$], and is divined into three regions haying different mechanism as the current increased: the region I below 230[V/cm] shows the ohmic conduction. The region II can be explained by the Poole-Frenkel emission theory, and the region III is dominated by the tunneling effect.ect.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2005

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 2 to 50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of agricultural products. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the agricultural products. Energy for moisture evaporation is supplied by the infrared radiant energy. The optimum temperature and drying time for the best drying conditions of changing the red peppers with the moisture content of 18% and the restore rate of 80~85% are $80^{\circ}C$ and 44 hours. The performance of radiation tubes coating with the radiation paint developed in this research has the energy of $2.27{\times}103W/m^2{\mu}m$, $150^{\circ}C$ within the scope of radiation wave length of $2{\sim}30{\mu}m$ and has the radiation 0.92~0.93, which is superior to the general radiation tubes. The extinction coefficient according to the band pass filter using the 4 flux theory ha higher dependability on wave length, accounting for $2{\sim}17{\mu}m$ and $5{\times}105{\sim}106m-1$. A comparison between the theoretical energy transfer whose figures are interpreted according to 4 flux theory and the experimental energy transfer of far infrared dryer leads to the findings of the agreement less than 5%.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.83.4-84
• /
• 2015

We report that a strong downflow event caused three-minute oscillations in the solar atmosphere. Our observations were carried out by using the Fast Imaging Solar Spectrograph (FISS) of the 1.6 meter New Solar Telescope (NST) and the Interface Region Imaging Spectrograph (IRIS). Our main findings are as follows: (1) The strong downflow was seen at the $H{\alpha}$ absorption line at first, and then appeared at the Si IV and C II emission lines. It seems that the characteristics of the downflow are consistent with a coronal rain event. (2) After the event, oscillations of velocity were identified in the chromospheric lines and transition region lines. (3) The amplitudes of oscillations were 2km/s at Mg II line and 3km/s at C II and Si IV lines and decreased with time. (4) The period of the oscillation was 2.67 minutes at first, but gradually increased with time. Our findings are in agreement with Chae & Goode (2015)'s theory that of acoustic waves generated by a disturbance in a gravitationally-stratified medium.

• Journal of the Chungcheong Mathematical Society
• /
• v.10 no.1
• /
• pp.127-139
• /
• 1997

The spherical non-commutative $\mathbb{S}_{\omega}$ were defined in [2,3]. Assume that no non-trivial matrix algebra can be factored out of the $\mathbb{S}_{\omega}$, and that the fibres are isomorphic to the tensor product of a completely irrational non-commutative torus with a matrix algebra $M_k(\mathbb{C})$. It is shown that the tensor product of the spherical non-commutative torus $\mathbb{S}_{\omega}$ with the even Cuntz algebra $\mathcal{O}_{2d}$ has a trivial bundle structure if and only if k and 2d - 1 are relatively prime, and that the tensor product of the spherical non-commutative torus $S_{\omega}$ with the generalized Cuntz algebra $\mathcal{O}_{\infty}$ has a non-trivial bundle structure when k > 1.