• Korean journal of food and cookery science
• /
• v.6 no.3 s.12
• /
• pp.25-32
• /
• 1990

In this study, the cis to trans isomerization of unsaturated fatty acids were investigated about Soybean oil (SBO), Corn germ oil (CGO), Cottonseed oil (CSO), Margarine (MG), Shortening (ST) incubated at $40{\pm}2^{\circ}C$ for 35 days and heated at $185{\pm}2^{\circ}C$ for 24 hours. The contents and kinds of trans fatty acids in each sample were determined by GLC after seperating by HPLC. The results were obtained as follows; 1. When samples were incubated at $40{\pm}2^{\circ}C$ for 35 days, the contents of total trans fatty acids were increased from $0.5{\sim}12.3%$ to $0.8{\sim}20.5%$. The kinds of trans fatty acids found were $t-C_{18:1},\;t,c-C_{18:2},\;t,t-C_{18:2},\;t,c,c-C_{18:3}$ in $SBO,\;t-C_{18:1},\;t,c-C_{18:2}$ in $CGO,\;t-C_{16:1},\;t-C_{18:1},\;t,c-C_{18:2},\;t,t-C_{18:2}$ in CSO. Processed oil such as MG and ST showed more complicated composition of trans fatty acids than SBO, CGO and CSO. $t-C_{18:1},\;t,c-C_{18:2},\;t,t-C_{18:2},\;t,c,t-C_{18:3},\;t-C_{20:1}$ were detected in ST. 2. In the case of heating at $185{\pm}2^{\circ}C$ for 24 hours, the contents of total trans fatty acid were $1.6{\sim}37%$. 2% in all samples. Heating made more remarkable isomerization than incubation $(40{\pm}2^{\circ}C)$. Specially, $c,c,t-C_{18:3}$ in $SBO,\;t,t,t-C_{18:3}$ in $MG,\;t,c,t-C_{18:3},\;t,t,t-C_{18:3}$ in ST were detected. 3. The total contents of trans fatty acids of processed oil were higher than vegetable oils. During incubation, trans fatty acids increased in the order of MG>ST>CGO>SBO>CSO, and during heat treatment, MG>ST>SBO>CGO>CSO.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.100-104
• /
• 1967

The systems of aromatic amines such as aniline, N,N-dimethylaniline and N,N-diethylaniline with iodine or iodine monochloride in carbon tetrachloride have been examined spectrophotometrically. The results indicate the formation of one to one molecular complexes. The equilibrium constants obtained at room temperature for formation of the complexes are as follows: $C_6H_5NH_2{\cdot}I_2\;2.05$, $C_6H_5N(CH_3)_2{\cdot}I_2\;15.2$, $C_6H_5N(C_2H_5)_2{\cdot}I_2\;35.5$, $C_6H_5NH_2{\cdot}ICl\;18.5$, $C_6H_5N(CH_3)_2{\cdot}ICl\;25.6$, and $C_6H_5N(C_2H_5)_2\;42.0$ l $mole^{-1}$.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.168-177
• /
• 2006

Thirty-nine strains of Colletotrichum gloeosporioides and 5 strains of C. acutatum stored in Korean Agricultural Culture Collection(KACC) were re-identified based on molecular characteristics of ribosomal internal transcribed spacer(ITS) and partial $\beta$-tubulin gene and cultural characteristics on potato dextrose agar(PDA) and Benomyl-added PDA. As the results, 19 strains were identified as C. acutatum with 13 strains of group A2, 5 strains of group A3, and 1 strain of group A4. In addition, 20 strains were identified as C. gloeosporioides with 18 strains of ribosomal DNA group(RG) 4 and 2 strains of RG6. The rest were identified as C. boninense RG5(2 strains), C. coccodes RG2(2 strains), and C. dematium RG12(1 strain). Out of domestic 31 strains, 12 strains were identified as C. acutatum A2, one strain as C. acutatum A3, 14 strains as C. gloeosporioides RG4, 2 strains as C. gloeosporioides RG6, one strains as C. boninense RG5 and one strain as C. dematium RG12. We also discussed taxonomy of C. gloeosporioides and C. acutatum and composition of C. gloeosporioides/C. acutatum isolates from major crops in Korea.

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.33-37
• /
• 1999

We have constructed a synthetic spectrum of the 2.5 micron $C_2H$ bands and compared them with diminutive structures in the near-infrared spectra of Comets P/Halley and West (1976 VI). We found that the Q branches of the $C_2H$ bands coincide with two small emission peaks in the spectra of the comets. We undertook Monte Carlo simulations using observed emission intensities of $C_2$ and possibly $C_2H$ in Comet P/Halley in order to derive a lifetime range of $C_2H$ and a production rate at the time of observations of P/Halley. We obtained a $C_2H$ production rate of $1\times10^{27}\;sec^{-1}$ for P/Halley on December 20, 1985, assuming the 2.5 micron features are due to $C_2H$. We derived a very short lifetime (<100 seconds) of $C_2H$ at 1AU heliocentric distance, assuming that the only parent molecule for $C_2H$ and $C_2$ is $C_2H$. Using this short lifetime we were unable to fit our $C_2$ distribution model to $C_2$ distribution curves observed by O'Dell et al.(1988), because our curve shows a steep slope compared with the observed one. We conclude that there must be significant additional source(s) for $C_2H$ and $C_2$ other than $C_2H_2$.

• Korean Journal of Materials Research
• /
• v.1 no.3
• /
• pp.139-144
• /
• 1991

The geometries and energies of $C_2-C_5$ clusters have been calculated using simple semiempirical potential energy functions. The results of the calculations show that the most stable structure of the $C_2-C_5$ clusters is linear and that not only the rhombic $C_4$ but also the Y-shaped $C_4$ hale similar energy to the linear $C_4$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.3
• /
• pp.225-232
• /
• 1991

A Study was carried out to elucidate the triglyceride compositions of the red pepper seed oils harvested from two different areas. The oil was extracted from the red pepper seed with nhexane. Each triglyceride of the oil was separated by thin layer chromatography (TLC) and fractonated by reverse phase high performance liquid chromatography (HPLC) on the basis of acyl carbon numbers, and partition number group(PN) and fatty acid composition of triglyceride were analyzed by gas liquid chromatography (GLC). From the results, it was found that the red pepper seed oils of the Chungsong and Youngyang areas consisted of 14 and 18 kinds of triglycerides, respectively. The red pepper seed oil of the Chungsong area consisted of (C18:2, C18:2, C18:2=41.0%), (C16:0, C18:2, C18:2=37.1%), and that of the Youngyang area consisted of (C18:2, C18:2, C18:2=41.0%), (C16:0, C18:2, C18:2=36.3%) and (C16:0, C16:2, C18:2=8.4%), as the major triglycerides.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.751-757
• /
• 2003

Rapid densification of a SiC-30 wt% TiC powder with additive 10 wt% A1$_2$O$_3$-Y$_2$O$_3$-CaO was conducted by Spark Plasma Sintering(SPS). The fully-densified materials can be obtain through the SPS process with very fast heating rate and short holding time. In the present work, the heating rate and applied pressure were kept to be $100^{\circ}C$/min and 40 MPa, while sintering temperature varied from $1600^{\circ}C$ to $1800^{\circ}C$ for 10 min. The full densification of SiC-30 wt% TiC composites with the addition of $Al_2$O$_3$, $Y_2$O$_3$ and CaO was achieved at the temperature above $1700^{\circ}C$ by spark plasma sintering. The XRD found that 3C-SiC and TiC were maintained the entire SPS process temperature, without phase transformation of SiC and formation of YAG phase to $1800^{\circ}C$. The microstructures of the rapidly densified SiC-30 wt% TiC composites consisted of smaller equiaxed SiC grains and larger TiC grains. The biaxial strength of 635.2 MPa and fracture toughness of 6.12 MPaㆍ$m^{1/2}$ were found for the specimen prepared at $1750^{\circ}C$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.808-815
• /
• 2008

The composites were fabricated 61[vol.%] ${\beta}$-SiC and 39[vol.%] $TiB_2$ powders with the liquid forming additives of 8, 12, 16[wt%] $Al_2O_3+Y_2O_3$ as a sintering aid by pressureless annealing at 1650[$^{\circ}C$] for 4 hours. The present study investigated the influence of the content of $Al_2O_3+Y_2O_3$ sintering additives on the microstructure, mechanical and electrical properties of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), ${\beta}$-SiC(3C), $TiB_2$, and In Situ YAG($Al_2Y_3O_{12}$). The relative density of SiC-$TiB_2$ composites was lowered due to gaseous products of the result of reaction between SiC and $Al_2O_3+Y_2O_3$. There is another reason which pressureless annealed temperature 1650[$^{\circ}C$] is lower $300{\sim}450[^{\circ}C]$ than applied pressure sintering temperature $1950{\sim}2100[^{\circ}C]$. The relative density, the flexural strength, the Young's modulus and the Vicker's hardness showed the highest value of 82.29[%], 189.5[Mpa], 54.60[Gpa] and 2.84[Gpa] for SiC-$TiB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature. Abnormal grain growth takes place during phase transformation from ${\beta}$-SiC into ${\alpha}$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. The electrical resistivity showed the lowest value of 0.0117[${\Omega}{\cdot}cm$] for 16[wt%] $Al_2O_3+Y_2O_3$ additives at 25[$^{\circ}C$]. The electrical resistivity was all negative temperature coefficient resistance (NTCR) in the temperature ranges from $25^{\circ}C$ to 700[$^{\circ}C$]. The resistance temperature coefficient of composite showed the lowest value of $-2.3{\times}10^{-3}[^{\circ}C]^{-1}$ for 16[wt%] additives in the temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$].

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.194-200
• /
• 2018

Objective : Sometimes a vertebral artery (VA) enters the spinal canal via the C1-2 intervertebral space, a variation regarded as a C2 segmental-type VA. This paper describes the anatomy of the C2 segmental-type VA and reviews its clinical importance. Methods : Between March 2014 and November 2015, 3386 patients underwent computed tomographic angiography. I identified C2 segmental-type VAs, associated vascular variation, the origin of ipsilateral posterior inferior cerebellar arteries (PICAs), and the clinical symptoms associated with C2 segmental-type VAs. The origin of an ipsilateral PICA is divided into 5 types. A type 1 PICA originates from ipsilateral VAs coursing suboccipitally (IVASO), a type 2 originates from ipsilateral proximal C2 segmental-type VAs, a type 3 originates from ipsilateral distal C2 segmental-type VAs. For type 4, the PICA does not originate from an ipsilateral VA. For type 5, the PICA is the terminal end of an ipsilateral C2 segmental-type VA. Results : One hundred thirteen patients had 121 C2 segmental-type VAs; 47 were associated with an IVASO, and 74 were not. Four type 1, 13 type 2, 60 type 3, 42 type 4, and two type 5 PICAs were identified. Only one patient showed symptoms associated with a C2 segmental-type VA, being a 71-year-old man presenting with a C2 segmental-type VA infarction. Conclusion : For C2 segmental-type VAs, the ipsilateral IVASO and origin of the PICA are important for predicting the outcome of this type of VA infarction.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.340-348
• /
• 2017

$SiC_f/SiC$ composites were joined using a $60{\mu}m-thick$ $Ti_3AlC_2$ or $Ti_3SiC_2$ MAX phase tape. The filler tape was inserted between the $SiC_f/SiC$ composites containing a 12 wt.% $Al_2O_3-Y_2O_3$ sintering additive. The joining was performed to a butt-joint configuration at $1600^{\circ}C$ or $1750^{\circ}C$ in an Ar atmosphere by applying 3.5 MPa using a hot press. Microstructural and phase analyses at the joining interface confirmed the decomposition of $Ti_3AlC_2$ and $Ti_3SiC_2$, indicating the joining by solid-state diffusion. The results showed sound joining interface without the presence of cracks. Joining strengths higher than 150 MPa could be obtained for the joints using $Ti_3AlC_2$ or $Ti_3SiC_2$ at $1750^{\circ}C$, while those for joined at $1600^{\circ}C$ decreased to 100 MPa approximately without the deformation of the joining bodies. The thickness of initial filler tape was reduced significantly after joining because of the decomposition and migration of MAX phase owing to the plasticity at high temperatures.