• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.304-304
• /
• 2007

고주파 모률에서 사용되는 기판소재는 저유전율과 낮은 loss 특성을 요구함으로 지속적인 연구를 필요로 한다. 지금까지의 ceramic/glass composite 에서 주로 사용된 ceramic filler는 Al2O3로 낮은 유전률을 구현에 한계가 있었다. Cordierite는 낮은 유전율 (${\varepsilon}_r$ < 4)을 나타내는 filler로서 그 가능성이 높지만 아직까지 보고된 결과들이 미흡한 실정이다. 따라서 본 연구에서는 cordierite filler와 SiO2-B2O3-Al2O3-RO (R : Zn, Sr, Ba, Ca)계의 glass를 혼합하여 LTCC용 기판소재로서의 가능성을 확인하고자 저온 동시소성이 가능한 소결온도인 $850^{\circ}C{\sim}1.000^{\circ}C$ 사이에서 소재의 소결실험을 진행하였다. 소결온도에 따른 상변화, 유전특성을 확인한 결과 filler로 사용된 cordierite상만이 관찰 되었으며 소결조건에 따라 5.0~5.5의 낮은 유전율과 1.000~1,500의 Q를 나타내는 것을 확인 하였다.

• Nuclear Engineering and Technology
• /
• v.41 no.2
• /
• pp.149-154
• /
• 2009

The microstructure, the corrosion behavior and the oxide properties were examined for Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr (HANA-4) alloys which were subjected to two different final annealing temperatures: $470^{\circ}C$ and $570^{\circ}C$. HANA-4 was shown to have $\ss$-enriched phase with a bcc crystal structure and Zr(Nb,Fe,Cr)$_2$ with a hcp crystal structure with $\ss$-enriched phase being more frequently observed compared with Zr(Nb,Fe,Cr)$_2$. The corrosion rate of HANA-4 was increased with an increase of the final annealing temperature in the PWR-simulating loop, $360^{\circ}C$ pure water and $400^{\circ}C$ steam conditions, which was correlated well with a reduction in the size of the columnar grains in the oxide/metal interface region. The oxide growth rate of HANA-4 was considerably affected by the alloy microstructure determined by the final annealing temperature.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.6-9
• /
• 2013

Korea Superconducting Tokamak Advanced Research (KSTAR) has a helium refrigeration system (HRS) with the cooling capacity of 9 kW at 4.5 K. Main cold components are composed of 300 tons of superconducting (SC) magnets, main cryostat thermal shields, and SC current feeder system. The HRS comprises six gas storage tanks, a liquid nitrogen tank, the room temperature compression sector, the cold box (C/B), the 1st stage helium distribution box (DB#1), the PLC base local control system interconnected to central control tower and so on. Between HRS and cold components, there's another distribution box (DB#2) nearby the KSTAR device. The entire KSTAR device was constructed in 2007 and has been operated since 2008. This paper will present the maintenance result of the KSTAR HRS during the campaign and discuss the operation record and maintenance history of the KSTAR HRS.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.12
• /
• pp.1388-1393
• /
• 2001

Objective : In the retrospective analyzing 19 consecutive patients with subaxial cervical spine(C3~T1) injury treated by posterior cervical fixation and fusion, clinical manifestation, radiologic finding, operative technique, and postoperative results following 6 months were analyzed. Materials and Methods : Most common fracture level was C4-5, mean age 41, and male to female ratio 13 : 6. The most common cause of injury was motor vehicle accident(17 cases). In 19 cervical procedures, interspinous triple wiring was done in 14 cases, lateral mass plating in 5 cases, and additional anterior fusion in 2 cases. Results : Twelve weeks after operation, all cases were reviewed by plain cervical radiogram. In 17 cases that treated by posterior fusion only, 14 cases(81%) had kyphotic angle change less than $5^{\circ}$, 2 cases(12%) $5-20^{\circ}$, and 1 case(6%) more than $20^{\circ}$. Overall fusion rate was 88%, and there was no significant difference of bone fusion rate between autogenous bone graft and allogenous bone graft. Conclusion : In the case of severe posterior column injury or displacement, posterior approach seems superior to anterior approach, but in the case of combined anterior column injury, anterior approach is considered necessary. In this study, posterior fixation and fusion might be acceptable procedure for subaxial cervical fracture and dislocation, owing to its high fusion rate, low kyphotic angulation and low operation related complication rate.

• Korean Journal of Microbiology
• /
• v.22 no.3
• /
• pp.175-181
• /
• 1984

In order to develope a protoplast fusion system for industrial coryneform bacteria, the optimum conditions for the formation and regeneration of progoplast were examined for Brevibacterium flavum and Corynebacterium glutamicum and the protoplast fusion was performed. For the formation of the protoplast of B. flavum and C. glutamicum, the optimum time for penicillin G. treatment to obtain protoplast was mid-exponential growth phase ($O.D_{580}=0.6-0.8,\;8.0{\times}10^7-1.0{\times}10^8cell/ml$). At the optimum conditions (0.3units/ml penicillin G and $400{\mu}g/ml$ lysoyme for treatement), frequencies of protoplast formation and protoplast regeneration were 99% and 25%, respectively. Protoplast regeneration frequency was highest under the optimum conditions for the protoplast formation. Addition of 25mM $Mg^{2+}\;and\;50mM\;Ca^{2+}$ to the regeneration medium further increased the regeneration frequencies. The protoplast fusion frequencies of B. flavum and C. glutamicum in intraspecies fusion were $1.0{\times}10^{-8}\;and\;7.8{\times}10^{-4}$, of the regenerated protoplast respectively, when 33% of PEG (polythylene glycol) 6,000 was used as the fusing agent.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1092-1099
• /
• 2018

Study Design: In-vitro biomechanical investigation. Purpose: To evaluate the biomechanical effects of the degeneration of the biodegradable cervical plates developed for anterior cervical discectomy and fusion (ACDF) on fusion and adjacent levels. Overview of Literature: Biodegradable implants have been recently introduced for cervical spine surgery. However, their effectiveness and safety remains unclear. Methods: A linear three-dimensional finite element (FE) model of the lower cervical spine, comprising the C4-C6 vertebrae was developed using computed tomography images of a 46-year-old woman. The model was validated by comparison with previous reports. Four models of ACDF were analyzed and compared: (1) a titanium plate and bone block (Tita), (2) strong biodegradable plate and bone block (PLA-4G) that represents the early state of the biodegradable plate with full strength, (3) weak biodegradable plate and bone block (PLA-1G) that represents the late state of the biodegradable plate with decreased strength, and (4) stand-alone bone block (Bloc). FE analysis was performed to investigate the relative motion and intervertebral disc stress at the surgical (C5-C6 segment) and adjacent (C4-C5 segment) levels. Results: The Tita and PLA-4G models were superior to the other models in terms of higher segment stiffness, smaller relative motion, and lower bone stress at the surgical level. However, the maximal von Mises stress at the intervertebral disc at the adjacent level was significantly higher in the Tita and PLA-4G models than in the other models. The relative motion at the adjacent level was significantly lower in the PLA-1G and Bloc models than in the other models. Conclusions: The use of biodegradable plates will enhance spinal fusion in the initial stronger period and prevent adjacent segment degeneration in the later, weaker period.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.38-45
• /
• 1995

The expression of Aspergillus nidulans glyceraldehyde-3-phosphate dehydrogenase (gpdA) and trpC promoters in A. oryzae were compared using E. coli lacZ gents fusions. The specific activities of the expressed E. coli $\beta$-galactosidase in A. oryzae transformants containing the A. nidulans gpdA promoter were around 2,000 units per ug of protein. The specific activities of transformants containing the A. nidulans trpC promoter were very low, ranging from 10.5 to 52.3 units per ug of protein. These results showed that the expression of the A. nidulans gpdA promoter in A. oryzae was approximately 70 times greater than the A. nidulans trpC promoter. In western blot analysis, immunoreactive bands of a imlilar molecular weight as the E. coli $\beta$-galactosidase were observed in A. oryzae carrying the gpdA-lacZ fusion and to a lesser intensity in those carrying the tvpC-lacZ fusion. Southern analysis showed that the higher expression of the gpdA-lacZ fusion as compared to the trpC-lacZ fusion was not due a greater number of integrated plasmids.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.567-576
• /
• 2017

Objective : Preoperative parameters including the T1 slope (T1S) and C2-C7 sagittal vertical axis (SVA) have been recognized as predictors of kyphosis after laminoplasty, which is accompanied by posterior neck muscle damage. The importance of preoperative parameters has been under-estimated in anterior cervical discectomy and fusion (ACDF) because there is no posterior neck muscle damage. We aimed to determine whether postoperative subsidence and pseudarthrosis could be predicted according to specific parameters on preoperative plain radiographs. Methods : We retrospectively analyzed 41 consecutive patients (male : female, 22 : 19; mean age, $51.15{\pm}9.25years$) who underwent ACDF with a stand-alone polyether-ether-ketone (PEEK) cage (>1 year follow-up). Parameters including SVA, T1S, segmental angle and range of motion (ROM), C2-C7 cervical angle and ROM, and segmental inter-spinous distance were measured on preoperative plain radiographs. Risk factors of subsidence and pseudarthrosis were determined using multivariate logistic regression. Results : Fifty-five segments (27 single-segment and 14 two-segment fusions) were included. The subsidence and pseudarthrosis rates based on the number of segments were 36.4% and 29.1%, respectively. Demographic data and fusion level were unrelated to subsidence. A greater T1S was associated with a lower risk of subsidence (p=0.017, odds ratio=0.206). A cutoff value of T1S<$28^{\circ}$ significantly predicted subsidence (sensitivity : 70%, specificity : 68.6%). There were no preoperative predictors of pseudarthrosis except old age. Conclusion : A lower T1S (T1S<$28^{\circ}$) could be a risk factor of subsidence following ACDF. Surgeons need to be aware of this risk factor and should consider various supportive procedures to reduce the subsidence rates for such cases.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.303-309
• /
• 1988

In order to establish the process of interspecific protoplast fusion of the genus Cellulomonas capable of utilizing of cellulose, C. flavigena NCIB 12901 and Cellulomonas sp. CSI-1, the optimum conditions for the regeneration and fusion were examined. The condition of suitable osmotic stabilizer for the protoplast regeneration of C. flavigena was established by using 0.4M sorbitol. And then, by addition of 3% po]yvinyl pyrrolidone (PVP) to cell wall regeneration medium, regeneration frequency was increased 3 times higher than that without PVP addition. The optimum conditions for the interspecific protoplast fusion between auxotrophic and antibiotics resistant mutants were obtained with 40%(W/V) of PEG (polyethylene glycol) 6000 as the fusogenic agent and 25mM of CaCl$_2$on treating time for 15 min. The fusion frequency between mutants was from 2.0$\times$10$^{-4}$ to 4.0$\times$10$^{-4}$ under the optimum conditions. The fusants were confirmed to revert from protoplast to cells of rod type during regeneration process and the aggregation of protoplast by PEG was observed. Also the progress of fusion was observed by scanning electron microscopy, Many isolated fusants were shown to be complement clones of both parents which occured at a high frequency among the isolated clones.

• Journal of Applied Biological Chemistry
• /
• v.43 no.4
• /
• pp.240-245
• /
• 2000

Two genes encoding maltooligosyltrehalose synthase (SaMTS) and maltooligosyltrehalose trehalohydrolase (SaMTH) were isolated from a hyperthermophilic microorganism, Sulfolobus acidocaldarius (ATCC 49462). ORFs of the SaMTS and SaMTH genes are 2,163 and 1,671 bp long and encode 720 and 556 amino acid residues, respectively. A bifunctional fusion enzyme (SaMTSH) was constructed through the gene fusion of SaMTS and SaMTH. Recombinant SaMTS, SaMTH, and SaMTSH fusion enzyme were overexpressed in E. coli BL21. SaMTS and SaMTH produced trehalose and maltotriose from maltopentaose in a sequential reaction. SaMTSH fusion enzyme catalyzed the sequential reaction in which the formation of maltotriosyltrehalose was followed by hydrolysis leading to the synthesis of trehalose and maltotriose. The SaMTSH fusion enzyme showed the highest activity at pH 5.0-5.5 and $70-75^{\circ}C$. SaMTS, SaMTH, and SaMTSH fusion enzyme were active in soluble starch, which resulted in the production of trehalose.