• 미생물학회지
• /
• 제30권3호
• /
• pp.181-186
• /
• 1992

Virgiamycin 생산 우도 인자인 virginiae butanolide C(VB-C)의 전달기구 해명을 위한 기초적 연구로서 receptor성 VB-C 결합단백질의 recycle 가능성 및 인산화가능성을 검토하였다. 배양 시간에 따른 [$^{3}$H] $VB-C_{7}$ 와의 결합활성은 virginiamycin 생산중지와 함께 증대되어 VB-C 결합단백질의 recycle 이 추정되었으며, S. virginiae 의 genome DNA 공존시 40-50% 의 결합 활성 저하로부터 DNA 와 결합에 의한 signal 전달가능성과 $\lambda-^{32}P$ ATP 에 의해 분자량 36, 000 의 VB-C결합단백질이 인산화된 결과로부터 인산화를 통한 signal 전달가능성이 시사되었다.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.283-288
• /
• 2011

In this paper, an adaptive signal tracking loop for a GPS L1/L2C/L5 receiver is designed. The design parameters is adjusted according to the receiver's operating conditions such as the signal strength and the receiver dynamics by using the different characteristics of GPS L1, L2C and L5 signal. Simulation results show that the tracking accuracy of the proposed signal tracking loop is better than those of L1, L2C and L5 only signal tracking loop.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.337-345
• /
• 2020

In this paper, an efficient signal tracking method to simultaneously track both GPS L1 C/A and Galileo E1B CBOC(6,1,1/11) using a low cost GPU is proposed. In the existing method that each GNSS signal is processed within 1 ms, more than 2 ms processing time is required in GPU to process 4 ms CBOC signal. It means that real time operation is possible if only Galileo E1B CBOC signal is concerned. But when both GPS C/A and Galileo CBOC is required, it cannot process GPS C/A signal in real time. To process 1 ms GPS C/A and 4 ms Galileo CBOC signal in real time, 4 ms Galileo CBOC signal is divided into 4 by 1 ms signal block in the proposed method. Specially, a buffer that simultaneously manages 1 ms and 4 ms signals is designed. In addition, a module that accumulates the 1 ms correlation value of the Galileo CBOC by 4 ms and passes it to the PLL and DLL is implemented. The operation and performance are evaluated with real measurements in the GPU based SDR. The experimental results show that tracking of more than 16 satellites of GPS C/A and Galileo E1B is possible using the proposed method.

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.188-193
• /
• 2010

With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.

• 대한전자공학회논문지
• /
• 제12권6호
• /
• pp.1-4
• /
• 1975

임팻다이오드의 임지던스크기가 연류에 교류를 중첩시켜 가할경우 변화하는 특성을 고찰하였다. 스펙트럼분석기상에서 반송파영점측정방법으로 견파수변조된 파의 특성을 측달하였다. 각파수변조는 아주 작은 교류신호전압으로 가능하며 변조주파수를 일정히하고 신호전압을 증가시키면 소요대역폭이 아주 커지고 신호전압을 일정히하고 변조각파수를 작게할때 대역건은 약간 좁아지는 결과를 얻었다. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.646-652
• /
• 2013

EU's Galileo project is a market-based GNSS (Global Navigation Satellite System) that is under development. It is expected that Galileo will provide the positioning services based on new technologies in 2020s. Because Galileo E1 signal for OS (Open Service) shares the same center frequency with GPS L1 C/A signal, CBOC (Composite Binary Offset Carrier) modulation scheme is used in the E1 signal to guarantee interoperability between two systems. With E1 signal consisting of a data channel and a pilot channel at the same frequency band, there exist several options in designing signal acquisition for Assisted-Galileo receivers. Furthermore, compared to SNR worksheet of Assisted-GPS, some factors should be examined in Assisted-Galileo due to different correlation profile and code length of E1 signal. This paper presents SNR worksheets of Galileo E1 signals in E1-B and E1-C channel. Three implementation losses that are quite different from GPS are mainly analyzed in establishing SNR worksheets. In the worksheet, hybrid long integration of 1.5s is considered to acquire weak signal less than -150dBm. Simulation results show that the final SNR of E1-B signal with -150dBm is 19.4dB and that of E1-C signal is 25.2dB. Comparison of relative computation shows that E1-B channel is more profitable to acquire the strongest signal in weak signal environment. With information from the first satellite signal acquisition, fast acquisition of the weak signal around -155dBm can be performed with E1-C signal in the subsequent satellites.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.723-730
• /
• 2011

The GPS modernization program offered a new civil signal on the L2 band, and the first modernized GPS Block IIR satellite was launched in September 2005. Currently, eight GPS Block IIRM satellites and two Block IIF satellites transmit L2C signal. The L2C signal contains two codes of CM and CL that are much longer than the L1 C/A code. Thus, the acquisition of the CM and CL codes takes more time compared with that of L1 C/A code. Under the assumption that the L2C signal is strong enough for detection, this paper suggests rapid acquisition methods for the GPS L2C signals for software receivers and compares its performance with that of other methods.

• Journal of Animal Science and Technology
• /
• 제44권1호
• /
• pp.13-22
• /
• 2002

한우의 성장단계 특이발현 유전자를 탐색하기 위하여, 본 연구에서는 유전자의 발현 유무 및 발현정도의 차이를 나타내는 유전자를 분리하는데 있어 가장 강력한 수단으로 알려진 subtractive cDNA hybridization 기법을 이용하여 한우 등심조직으로부터 12개월령 및 24개월령 특이적인 subtractive cDNA library를 제작하였다. 성장단계 특이적인 유전자를 탐색하기 위하여, 6, 12 및 24개월령 cDNA를 사용하여 reverse northern blot 분석을 실시하였으며, 6개월령 cDNA probe에 대하여 특이적인 signal을 나타낸 3개의 clone은 EPV 20, Ca2+ ATPase, 및 TCTP 유전자와 유사성을 나타내었다. 12개월령 cDNA probe에 대하여 특이적인 signal을 나타낸 9개의 cDNA clone은 각각 VCP, HSP 70, aldolase A, MSSK1, GM-2 activator protein, ryanodine receptor, acidic ribosomal phosphoprotein p1, ADP/ATP translocase T1 및 UCP 2 유전자와 높은 homology를 가지고 있었다. 또한 2개의 clone이 각각 12개월령 및 24개월령 cDNA probe에 대하여 특이적인 signal을 나타내었는데, 12개월령 cDNA probe에 대해서만 signal을 나타낸 clone은 ferrochelatase 유전자와 유사하였으며, 24개월령 probe에 대해서만 signal을 나타낸 clone은 ADRP 유전자와 유사하였다. 이상에서와 같이, 본 연구에서 제작한 성장단계 특이적인 subtractive cDNA library를 분석하여 14종의 유전자를 한우 성장단계 특이 발현 후보 유전자로 선정하여 염기서열을 분석하였으며, 이외에도 성장단계에 있어 특이적으로 발현될 것으로 추정되는 cDNA 클론의 염기서열을 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1754-1755
• /
• 2011

GPS modernization program offers a new civil signal on L2 band and there are currently 9 GPS satellites transmitting L2C signal. The acquisition of L2C takes much time comparing with that of L1 signal. This paper suggests a fast acquisition method for the L2C GPS signals for software receivers.

• 제어로봇시스템학회논문지
• /
• 제17권1호
• /
• pp.61-67
• /
• 2011

The GPS new civil signal is modulated on the L2 carrier at a frequency of 1227.6MHz. The L2C signal is composed of two multiplexed code signals, which include CM code with a 10,230 chip sequency repeating every 20ms, and CL code which has a 767,250 chip sequency repeating every 1.5 seconds. Thus, the new civil signal have much improved cross correlation properties so that the position fixing can be possible even with very weak signals. However, it requires very long acquisition time because of its long code length. This paper presents an efficient signal acquisition method for L2C AGPS receiver. Snapshot mode and coarse time assistance are assumed and total integration time is given by 1.5 sec. By SNR worksheet and computer simulation, it is proven that L2C signal can be acquired with very weak power less than -150dBm. Considering the acquisition time and the sensitivity, it is recommended that the highest power signal is acquired with CM code first to reduce TTFF. By the timing synchronization, at this time, search space of the code phase for other signals can be greatly reduced so that CL code can be used in signal acquisition to maximize sensitivity with small computation.