Frequency modulation of a waveguide cavity cw IMPATT diode oscillator

도파관캐비티를 사용한 임팻다이오드 발진기의 주파수변조특성

  • 윤현보 (한국항공대학 통신공학과)
  • Published : 1975.06.01

Abstract

This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

임팻다이오드의 임지던스크기가 연류에 교류를 중첩시켜 가할경우 변화하는 특성을 고찰하였다. 스펙트럼분석기상에서 반송파영점측정방법으로 견파수변조된 파의 특성을 측달하였다. 각파수변조는 아주 작은 교류신호전압으로 가능하며 변조주파수를 일정히하고 신호전압을 증가시키면 소요대역폭이 아주 커지고 신호전압을 일정히하고 변조각파수를 작게할때 대역건은 약간 좁아지는 결과를 얻었다. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

Keywords