• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.74-79
• /
• 2006

Advanced Microcontroller Bus Architecture (AMBA) 기반 System-on-Chip (SoC)에서는 기능적 테스트를 위해 ARM사의 Test Interface Controller (TIC)를 사용한다. 따라서 구조적 스캔 테스트 패턴도 TIC와 AMBA 버스를 통해 인가하면서 스캔입력과 출력을 동시에 수행할 수 없다는 단점이 있다. 본 논문에서는 ARM 코어를 사용하는 SoC 테스트를 위한 AMBA based Test Access Mechanism (ATAM)을 제안한다. 기존 TIC와의 호환성을 유지하고 스캔 입력과 출력을 동시에 할 수 있으므로 고가의 Automatic Test Equipment (ATE)를 통한 테스트 시간을 대폭 절감할 수 있다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.110-110
• /
• 2018

여러 니켈합금 중 인코넬 600은 원전 가압경수로(PWR)의 튜브 재료로 널리 사용되는 재료이다. 스테인리스강과 비교하여 우수한 내식성과 기계적 특성으로 인해 화학설비, 발전설비, 그리고 해양설비 등과 같은 여러 산업분야에서도 널리 사용되고 있다. 그러나 가압경수로용 증기 발생기의 튜브 재료와 같은 특수 환경에서 예민화에 따른 입계부식 및 입계응력부식 등의 문제가 흔히 보고되고 있다. 이러한 내구성 문제는 설비 및 장비의 수명, 내구성 그리고 안정성 등의 치명적인 영향을 미친다. 따라서 용접, 열처리, 그리고 가공과정에서 발생하는 Inconel 600의 예민화 및 입계부식에 관한 연구가 활발히 진행되고 있다. 그러나 100시간 이상 장시간 열화된 시편에 대한 예민화 연구는 전무한 실정이다. 본 연구에서는 장시간 열화된 Inconel 600의 예민화를 평가하기 위해 최대 1,000시간까지 열화를 실시하였으며, 이에 대한 평가방법으로 Double-Loop Electrochemical Potentiokinetic Reactivation(DL-EPR) 시험법을 적용하였다. 본 실험에서 사용된 인코넬 600의 화학성분(wt, %)은 0.01 C, 0.05 Si, 0.14 Mn, 15.3 Cr, 0.5 Cu, 0.015 S, 그리고 나머지는 Ni 이다. 예민화 평가를 위한 등온 열화는 전기열처리로를 이용하여, $550^{\circ}C$와 $650^{\circ}C$에서 최대 1000시간까지 실시하였다. 열화에 따른 미세조직 변화는 scanning electron microscope와 energy dispersive x-ray spectroscopy를 이용하여 실시하였다. DL-EPR 실험은 $25^{\circ}C$의 0.1M $H_2SO_4$ + 0.001M KSCN(potasium thiocyanate) 수용액 하에서 실시하였으며, 분극은 OCP로부터 600 mV(SSE vs.)까지 1.67mV/s 주사속도로 forward scan을 실시 후, 동일한 속도로 OCP까지 reverse scan을 실시하였다. Degree Of Sensitization(DOS)값은 anodic scan peak($I_a$) 값과 reverse scan peak($I_r$) 값의 비로 산출하였다. $$i.e.\;DOS=I_r/I_a{\times}100$$. 그 결과, 온도 변수에 따른 Inconel 600강의 예민화 거동은 서로 상이한 경향을 나타내었다. $550^{\circ}C$의 경우, 열화가 진행됨에 따라 DOS값은 급격하게 증가하는 경향을 나타냈다. 반면, $650^{\circ}C$에서는 일정시간 이후부터 Cr 확산 현상에 의한 탈 예민화 현상이 관찰되었다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.391-400
• /
• 1998

The aim of this study was to determine the shaping ability of stainless-steel K file (S-S K file), nickel-titanium K file (Ni-Ti K file) and engine driven nickel-titanium file (Quantec file) in resin simulated root canal. Computed tomography was used to evaluate the change of the root canal morphology. Thirty nine resin simulated root canal were divided into four groups (A:12, B:12, C:12, D:3). Resin simulated canals were scanned by computed tomography before instrumentation (1st C-T scan). Canals were instrumented using step back preparation technique with S-S K file in group A and Ni-Ti K file in group B. Group C was prepared with engine driven Ni-Ti file. Group D was uninstrumented to compare the 1st C-T scan images with 2nd C-T scan images of root canal. Instrumented canals were again scanned using computed tomography (2nd C-T scan), and reformated images of the uninstrumented canals were compared with images of the instrumented canals. In the sections of 2mm and 6mm from the apex, Quantec file caused significantly less canal transportation than S-S K file and Ni-Ti K file (p<0.05). Quantec file produced more centered than S-S K file and Ni-Ti K file in the sections of 2mm and 4mm from the apex (p<0.05). There was no significant difference in the removed volume of canals among the each groups (p>0.05). However the removed canal volume from the apex to 5mm were significantly higher than them from 5mm to 1mm (p<0.05) in each groups. Under the conditions of this study, preparation with Quantec file was more effective and produce more appropriate canal shapes than S-S K file and Ni-Ti K file.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.107-114
• /
• 2020

기계, 디자인, 중공업 분야에서 많이 사용되어오던 역설계 기법이 최근 건설 산업분야에 BIM(Building Information Modeling) 기반 역설계 기법인 Scan-to-BIM 기술로 적극적으로 도입되기 시작하였으며, 그동안 비효율적인 부분들을 개선하기 위한 알고리즘, 시스템, 장비 등의 개발이 이루어지면서 기술의 확장성이 더욱 커지고 있다. 본 연구에서는 객관적인 자료에 근거한 특허 분석을 통하여 한국, 미국, 유럽, 일본의 Scan-to-BIM 관련 기술 동향을 파악하여 한국 Scan-to-BIM 기술의 올바른 방향을 모색하고자 한다. 건설 산업기술 특허분석관련 선행 연구 분석, Scan-to-BIM 기술에 대한 이론적 고찰과 관련 선행연구 고찰, WIPSON 특허검색시스템을 사용한 한국, 미국, 유럽, 일본 네 국가의 관련 기술에 대한 공개된 특허 문헌을 검색하여 정보를 수집, 검증과정 및 유효 특허 추출이 이루어졌으며, 도출된 유효 특허 데이터를 이용하여 특허출원 연도별 동향, 국가별 동향, 그리고 국제특허분류(IPC: International Patent Classification) 코드를 통한 기술별 동향, 상위 20위 주요출원인 및 출원 주체 종류, 패밀리 특허 동향 등을 분석하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.347-352
• /
• 2005

Scan Element Pattern(SEP) and Scan Impedance(SI) concepts are used to analyze the characteristics of open-ended waveguide array, which is the representative phased array antenna element in C-band and X-band. Transmit SEP's are calculated for 15$\sim$15 subarray and SI's are obtained by applying periodic boundary conditions for a unit cell of the given array condition. CST's MWS and Ansoft's HFSS are utilized for each analysis. Some relations are reviewed between the two results, which are based on mutual coupling effects. For validation purpose, an 8$\sim$8 subarray is constructed and tested. Transmit SEP measured in MTG's far-field range shows good agreement with the calculated transmit SEP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1250-1254
• /
• 1992

This paper describes the designed and fabricated thermal imaging system with the SPRITE(Signal PRocessing in The Element) detector, operating in the 3-12 micron band. This system consists of an afocal telescope, a scan unit containing the SPRITE detector, an electronic processor unit and a cooler. The optical scan system utilizing rotating polygon and oscillating mirror, is 2-dimensional serial/parallel scan type using five elements of the detector. And the electronic processor unit performs digital scan conversion to reform the parallel data stream into serial analog data compatable with conventional RS-170 video. The scan field of view is 40 ${\times}$ 26.7 and the MRTD(Minium Resolvable Temperature Difference) is 0.6 K at 7.5 cycles/mm. The acquired thermal image indicates that this system has a satisfactory performance.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권6호
• /
• pp.246-251
• /
• 2003

We report the theory of thin-sample Z -scan for materials, viz. diffusion-dominated photorefractives, having a nonlinearly induced phase that may be proportional to the spatial derivative of the intensity profile. The on-axis far-field intensity is approximately an even function of the scan distance on different positive and negative values for phase shift $\Delta$$\Phi$$_{o}$. In case of positive phase shift, the Z -scan graph shows a minimum and two maxima, while for the negative value, only one minimum is observed. The fact is that far-field beam profiles display beam distortion and shift of the peak as compared with Kerr-type or photovoltaic nonlinearities.s.

• Journal of Trauma and Injury
• /
• 제31권3호
• /
• pp.151-158
• /
• 2018

Purpose: The regional emergency medical centers manage the patients with major blunt trauma according to the process appropriate to each hospital rather than standardized protocol of the major trauma centers. The primary purpose of this study is to evaluate the effectiveness and influence on prognosis of additional cervical-thoracic-lumbar-spine computed tomography (CTL-spine CT) scan in diagnosis of spinal injury from the victim of major blunt trauma with impaired consciousness. Methods: The study included patients visited the urban emergency medical center with major blunt trauma who were over 18 years of age from January 2013 to December 2016. Data were collected from retrospective review of medical records. Sensitivity, specificity, positive predictive value, and negative predictive value were measured for evaluation of the performance of diagnostic methods. Results: One hundred patients with Glasgow coma scale ${\leq}13$ underwent additional CTL-spine CT scan. Mechanism of injury was in the following order: driver, pedestrian traffic accident, fall and passenger accident. Thirty-one patients were diagnosed of spinal injury, six of them underwent surgical management. The sensitivity of chest, abdomen and pelvis CT (CAP CT) was 72%, specificity 97%, false positive rate 3%, false negative rate 28% and diagnostic accuracy 87%. Eleven patients were not diagnosed of spinal injury with CAP CT and C-spine lateral view, but all of them were diagnosed of stable fractures. Conclusions: C-spine CT scan be actively considered in the initial examination process. When CAP CT scan is performed in major blunt trauma patients with impaired consciousness, CTL-spine CT scan or simple spinal radiography has no significant effect on the prognosis of the patient and can be performed if necessary.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.30-38
• /
• 1989

Since the nuclear power plants in Korea have been operated in 1979, the nondestructive testing (NDT) of pressure vessels and/or piping welds plays an important role for maintaining the safety and integrity of the plants. Ultrasonic method is superior to the other NDT method in the viewpoint of the detectability of small flaw and accuracy to determine the locations, sizes, orientations, and shapes. As the service time of the nuclear power plants is increased, the radiation level from the components is getting higher. In order to get more quantitative and reliable results and secure the inspector from the exposure to high radiation level, automation of the ultrasonic equipments has been one of the important research and development(R & D) subject. In this research, it was attempted to visualize the shape of flaws presented inside the specimen using a Modified C-Scan technique. In order to develope Modified C-Scan technique, an automatic ultrasonic scanner and a module to control the scanner were designed and fabricated. IBM-PC/XT was interfaced to the module to control the scanner. Analog signals from the SONIC MARK II were digitized by Analog-Digital Converter(ADC 0800) for Modified C-Scan display. A computer program has been developed and has capability of automatic data acquisition and processing from the digital data, which consist of maximum amplitudes in each gate range and locations. The data from Modified C-Scan results was compared with shape from artificial defects using the developed system. Focal length of focused transducer was measured. The automatic ultrasonic equipment developed through this study is essential for more accurate, reliable, and repeatable ultrasonic experiments. If the scanner are modified to meet to appropriate purposes, it can be applied to automation of ultrasonic examination of nuclear power plants and helpful to the research on ultrasonic characterization of the materials.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.84-85
• /
• 2002

웹을 통해 보여지는 대부분의 이미지는 스캐너와 같은 입력 장치에 의해 이뤄진다. 그러나 모니터로 보여지는 이미지의 색과 실제 색의 차이로 인한 문제가 나타나면서 색보정에 대한 관심이 증대되고 있다. 디지털 환경에서의 색상 차이는 같은 이미지라도 디지털 장치에서 입력되고 출력되는 값이 비 선형적이기 때문에 나타난다. 이에 본 연구는 스캐너에서 출력되는 디지털 값으로부터 실제색의 삼자극치를 예측하여 이를sRGB 규격으로 캘리브레이션 된 모니터로 정확하게 재현시키는 기술을 연구하였다. (중략)