• 한국농림기상학회지
• /
• 제18권3호
• /
• pp.135-142
• /
• 2016

운량 기반 기온감률 추정모형을 이용하여 0600과 1500의 기온감률을 모의하고, 최저 및 최고기온 추정과정에 활용되었던 기존의 단일 기온감률($-6.5^{\circ}C/km$, $-9^{\circ}C/km$)에 비해 추정 기온감률이 0600, 1500 기온의 추정오차를 개선할 수 있는지 확인하였다. 경남 하동과 전남 구례, 광양 지역의 '하동 2 수위표' 집수역을 기온감률 추정기법의 실용성 평가 지역으로 선정하고, 이 집수역 내 기상관측지점 12곳의 0600, 1500 기온자료를 2015년 한 해에 대해 수집하였다. 또한 2015년의 기상청 하늘상태 초단기예보 5km 격자자료를 이용, 대상 집수역의 0600, 1500 운량(0~10) 공간평균값을 계산하여 기온감률을 추정하였다. 검증지점의 0600 기온 추정오차는 기존 기온감률을 적용한 경우 평균 ME $-0.39^{\circ}C$, RMSE $1.45^{\circ}C$ 였으나, 새로운 기온감률로 변경한 결과 ME $-0.19^{\circ}C$, RMSE $1.32^{\circ}C$로 개선되었으며, 맑은 날은 ME $-0.8^{\circ}C$에서 $-0.57^{\circ}C$로, RMSE는 $1.72^{\circ}C$에서 $1.42^{\circ}C$로 감소되었고 흐린 날은 ME $-0.17^{\circ}C$에서 $-0.06^{\circ}C$, RMSE $1.16^{\circ}C$에서 $1.01^{\circ}C$로 줄어들었다. 또한 1500 기온에서 기존의 단일 기온감률과 추정 기온감률의 적용결과를 비교하면 맑은 날은 기온 추정오차에 거의 차이가 없었지만, 흐린 날은 기존 ME $-0.69^{\circ}C$, RMSE $1.54^{\circ}C$에서 ME $-0.51^{\circ}C$, RMSE $1.19^{\circ}C$로 개선되었다.

• 대한치과의사협회지
• /
• 제12권3호
• /
• pp.173-175
• /
• 1974

The author had studied epidemiologically the dental caries experience rate in the 200 students of nursing school of national medical center. The obtained results were as follows; 1. The dental caries experience rate in the students of nursing school of N.M.C. was 78.5%. 2. The D.M.F. teeth index in the students of nursing school of N.M.C was 4.5. 3. The filled teeth rate of students of nursing school of N.M.C. was lower than decayed teeth rate and missed teeth rate.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.533-537
• /
• 2007

This paper describes the heteroepitaxial growth of single-crystalline 3C-SiC (cubic silicon carbide) thin films on Si (100) wafers by atmospheric pressure chemical vapor deposition (APCVD) at 1350 oC for micro/nanoelectromechanical system (M/NEMS) applications, in which hexamethyldisilane (HMDS, Si2(CH3)6) was used as a safe organosilane single-source precursor. The HMDS flow rate was 0.5 sccm and the H2 carrier gas flow rate was 2.5 slm. The HMDS flow rate was important in obtaing a mirror-like crystalline surface. The growth rate of the 3C-SiC film in this work was 4.3 μm/h. A 3C-SiC epitaxial film grown on the Si (100) substrate was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and Raman scattering, respectively. These results show that the main chemical components of the grown film were single-crystalline 3C-SiC layers. The 3C-SiC film had a very good crystal quality without twins, defects or dislocations, and a very low residual stress.

• Archives of Pharmacal Research
• /
• 제12권2호
• /
• pp.88-93
• /
• 1989

In order to obtain some informations about the effect of molecular weight on the release rate of drug from drug carrier, two types of poly-L-glutamic acid (PLGA)-cytarabine (ara-C) conjugates, PLGA-ara-C:I and PLGA-ara-C:II, were synthesized using two types of PLGA having different average molecular weight, 43,000 and 77,800, respectively. The PLGA-ara-C conjugates were synthesized by mixed anhydride method and found to be covalently linked. Both types of conjugates charged negatively at biological pH. The pH-dependent release rate of ara-C was observed in both cases, and the release rate was accelerated in basic, acidic conditions (the k values were 0.015 $day^{-1}$ at pH 7.0, 0.024 $day^{-1}$ at pH 5.0, and 0.059 $day^{-1}$ at pH 9.0 in the case of PLGA-ara-C:I) and in the presence of pretense. The time required for the release of 16.5% of ara-C from PLGA-ara-C:I were 8 hr and 144 hr in the presence and absence of protease, respectively. Although both types of conjugates showed similar drug substitution ratio, they showed different release rates. Between the two types of conjugates, PLGA-ara-C:II showed the faster release rate (0.030 vs 0.042 $day^{-1}$ in pH 7.4 phosphate buffer solution at $37^{\circ}C$) and the smaller activation energy for the release of drug (12.5 vs 7.7 Kcal/mol) than PLGA-ara-C:I. The characteristic effect of molecular weight on the release rates of PLGA-ara-C conjugates suggests that the drug release rate might be effectively controlled over a prolonged period of time by the combined use of the different types of PLGA-ara-C conjugates having different molecular weights.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.136-139
• /
• 2005

The effect of oxidation and hot corrosion on the solid particle erosion was investigated for hot-pressed silicon nitride using as-polished, pre-oxidized and pre-corroded specimens by molten sodium sulfates. Erosion tests were performed at 22, 500 and $900^{\circ}C$ using angular silicon carbide particles of mean diameter $100{\mu}m$. Experimental results show that solid particle erosion rate of silicon nitride increases with increasing temperature for as-polished or pre-oxidized specimens in consistent with the prediction of a theoretical model. Erosion rate of pre-oxidized specimens is lower than that of as-polished specimens at $22^{\circ}C$, but it is higher at $900^{\circ}C$. Lower erosion rate at $22^{\circ}C$ in the pre-oxidized specimens is attributed due to the blunting of surface flaws, and the higher erosion rate at $900^{\circ}C$ is due to brittle lateral cracking. Erosion rate of pre-corroded specimens decreases with increasing temperature. Less erosion at $900^{\circ}C$ than at $22^{\circ}C$ is associated with the liquid corrosion products sealing off pores at $900^{\circ}C$ and the absence of inter-granular crack propagation observed at $22^{\circ}C$.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.767-773
• /
• 1997

Thermal shock behavior of alumina ceramics were studied by quenching the heated alumina specimen into the water of various temperatures over 0~10$0^{\circ}C$. The critical thermal shock temperature difference ( Tc) of the specimen decreased almost linearly from 275$^{\circ}C$ to 20$0^{\circ}C$ with increase in the cooling water temperature over 0~6$0^{\circ}C$. It is probably due to the increase of the maximum cooling rate which is dependent of the convection heat transfer coefficient. The convection heat transfer coefficient is a function of the temperature of the cooling water. However, the critical thermal shock temperature difference( Tc) of the specimen increased at 25$0^{\circ}C$ over 80~10$0^{\circ}C$ due to the film boiling of the cooling water. The maximum cooling rate, which brings about the maximum thermal stress of the specimen in the cooling process, was observed to increase linearly with the increase in the quenching temperature difference of the specimen due to the linear relationship of the convection heat transfer coefficient with the water temperature over 0~6$0^{\circ}C$. The critical maximum cooling rate for thermal shock fracture was observed almost constant to be about 260$\pm$1$0^{\circ}C$/s for all water temperatures over 0~6$0^{\circ}C$. Therefore, thermal shock behavior of alumina ceramics is greatly influenced by the convection heat transfer coefficient of the cooling water.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.305-310
• /
• 2008

Deep trench etching of silicon was investigated as a function of RF source power, DC bias voltage, $C_4F_8$ gas flow rate, and $O_2$ gas addition. On increasing the RF source power from 300 W to 700 W, the etch rate was increased from $3.52{\mu}m/min$ to $7.07{\mu}m/min$. The addition of $O_2$ gas improved the etch rate and the selectivity. The highest etch rate is achieved at the $O_2$ gas addition of 12 %, The selectivity to PR was 65.75 with $O_2$ gas addition of 24 %. At DC bias voltage of -40 V and $C_4F_8$ gas flow rate of 30 seem, We were able to achieve etch rate as high as $5.25{\mu}m/min$ with good etch profile.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.72-78
• /
• 2008

본 연구에서는 EPS 샌드위치 패널 심재에 대한 일정한 외부 복사열에 의한 질량감소속도와 열방출특성을 분석하였다. 일정한 외부 복사열원에 노출된 EPS 샌드위치 패널 심재의 질량감소속도와 열방출특성을 분석하기 위해 3가지 Type의 시료를 사용하였으며, 연소열을 측정하기 위해 Oxygen bomb calorimeter를 질량감소속도와 열방출특성을 분석하기 위해 Mass loss calorimeter를 사용하였다. 질량감소속도와 열방출 특성을 분석하기 위해 $100mm{\times}100mm{\times}50mm$ 크기의 시료를 사용하였다. 연구결과 50 kW/$m^2$의 외부복사열원에서 평균질량감소속도는 Type A와 B의 경우 각각 2.7 g/$m^2s$, 2.8 g/$m^2s$로 비슷한 경향을 나타낸 반면, Type C는 2.3 g/$m^2s$로 상대적으로 낮게 나타났으며, 평균열방출속도는 Type B와 C의 경우 각각 47.19 kW/$m^2$, 50.06 kW/$m^2$으로 큰 차이가 없었으나, Type A는 58.23 kW/$m^2$으로 상대적으로 높게 나타났다. 열방출특성의 결과를 캐나다 분류체계에 적용할 경우 Type A와 C의 경우 C-3등급, Type B의 경우 C-2등급으로 분류되었다. 향후 콘칼로리미터법을 이용한 샌드위치 패널 심재에 대한 열방출율 특성과의 비교연구가 필요할 것으로 판단된다.

• 한국양식학회지
• /
• 제9권4호
• /
• pp.339-344
• /
• 1996

한국산 rotifer, Brachionus plicatilis 내구란의 부화에 미치는 온도($24\~36^{\circ}C$)와 염분($5{\~}30$ ppt)의 영향을 조사하였다. 가장 높은 내구란의 부화율은 $28^{\circ}C$, 15 ppt에서 $85.7{\%}$로 나타났다. 온도 $32^{\circ}C(42.6\~60.5\%)$와 $36^{\circ}C(52.0\~61.4\%)$에서는 염분과 수온에 따른 부화율은 유의적인 차이를 보이지 않았다. 부화시간은 온도가 높을수록 짧게 나타났다. $5^{\circ}C$ 암흑상태로 내구란을 보존할 경우 2일 동안 일시적으로 부화하였다. 그러나 $28^{\circ}C$ 내구란을 보존한 경우, 14일 동안 산발적으로 부화하였다. 또한 부화율은 $28^{\circ}C(58.1\%)$가 $5^{\circ}C(40.2\%)$ 보다 높게 나타났다. 내구란의 건조온도가 시간에 따른 부화율은 $30^{\circ}C$에서 1시간동안 건조한 내구란이 $46.4{\%}$로 가장 높은 부화율을 보였다.

• Clinical and Experimental Pediatrics
• /
• 제48권6호
• /
• pp.614-618
• /
• 2005

목 적 : Cystatin C는 최근 사구체 여과율의 정확한 지표로 제시되고 있다. 본 연구에서는 소아 및 청소년에서 연령에 따른 혈청 cystatin C 농도의 변화, 혈청 cystatin C 농도의 정상 범위, 혈청 cystatin C 농도와 사구체 여과율의 연관성을 분석하여 소아 및 청소년에서 사구체 여과율의 지표로서 혈청 cystatin C 농도의 유용성을 알아보고자 하였다. 방 법 : 2004년 5월부터 7월까지 중앙대학교 용산병원을 방문하여 혈액 검사를 시행받은 환아들 중에서 신질환의 증거가 없는 276명의 환아들을 대상으로 혈청 cystatin C와 creatinine을 측정하였고, 사구체 여과율은 Schwartz's formula로 추정하였다. 결 과 : 1) 혈청 cystatin C 농도는 1세 이상보다 1세 미만에서 유의하게 높았다. 2) 혈청 cystatin C 농도는 1세 미만에서 연령과 음의 상관관계를 보였으나, 1세 이상에서는 유의한 상관관계를 보이지 않았다. 3) 1세 이상에서 혈청 cystatin C 농도의 정상 범위는 0.46-1.05 mg/L였다. 4) 1/cystatin C은 Schwartz's formula로 추정된 사구체 여과율과 양의 상관관계를 보였다. 결 론 : Cystatin C는 소아 및 청소년에서 사구체 여과율의 지표로 유용하게 사용될 수 있을 것으로 생각된다.