• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1127-1134
• /
• 2007

It was demonstrated that Y[N(TMS)2]3, the neutral yttrium-diamine complex 13 and yttrium-NPS complexes 15 are efficient precatalysts for intramolecular hydroamination of aminoalkynes involving primary amines. Complex 13 and 15 were quantitatively prepared in situ by direct metalation of the ligands 4 and 9 with 1 equiv of Y[N(TMS)2]3 in benzene-d6 at 120 oC for 5 days and 10 days, respectively, via elimination of (TMS)2NH. 5-Exo- and 6-exo-dig intramolecular hydroamination of aminoalkynes using catalyst 12 and 13 proceeded smoothly to give nitrogen-contained cyclic products in good to excellent yields in all cases. In the case of 7- exo-dig intramolecular hydroamination, the desired product was produced in 41% and 48% yields despite the gem-dimethyl effect. However, treatment of catalyst 15 with aminoalkynes (19 and 22) having a methyl substituent at the carbon adjacent to triple bond and 6-exo-dig intramolecular hydroamination of 21 failed to give the desired products. Zirconium-catalyzed intramolecular hydroamination of aminoallenes (25, 27, and 31) with 5 mol% 16 afforded 2-(trans-1-propenyl)pyrrolidine, 2-isopropylenepyrrolidine, and 2-(trans-1- propenyl)piperidine in 96%, 95%, and 93% yield, respectively. However, subjecting 25 to 5 mol% 15 was unsuccessful to produce the desired product.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3805-3810
• /
• 2013

The surface modification of silica particles (SPs) was systemically conducted by the treatment of 0.1-10 wt % phenylsilanetriol (PST) on the basis of SPs used through two step processes: 1) the PST coating of SPs via evaporation under reduced pressure and 2) their thermal condensation leading to Si-O-Si bond formation via heating at $130^{\circ}C$. The evaluation of the modified SPs was conducted by the simple floating test on water and the measurement of the contact angle (CA) of water droplet on the 2-dimensional layer of modified SPs on slide glass. When PST was used about 2 wt % or above on the basis of SPs (about average size: 50 nm) used, the modified SPs were fully floated on the water and all dispersed into upper organic solvent layer after a shaking with the mixture of the water and benzene, indicating that the modified SPs have hydrophobic properties. The modified SPs were characterized by $^{29}Si$ MAS NMR and physicochemical properties including SEM, TEM, BET, adsorption/desorption isotherms, etc. were measured and compared each other in details. This research demonstrates that the organosilanetriol is a good modifier applicable for the surface modification of inorganic oxide particles using a low amount of modifier on the basis of oxide particles used.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.484-490
• /
• 2005

Human ribosomal protein S3 (rpS3), which has a DNA repair endonuclease activity, is a multifunctional protein. This protein is involved in DNA repair, translation, and apoptosis. In particular, rpS3 has a lyase activity, which cleaves the phosphodiester bond of damaged sites such as cyclobutane pyrimidine dimers and AP sites. Here, using deletion analysis, we identified that the repair endonuclease domain resides in the C-terminal region (165-243 aa) of rpS3. We also found that ectopic expression of GST-rpS3 in bacterial strain BL21 promoted the resistance of these cells to ultraviolet (UV) radiation and hydrogen peroxide ($H_{2}O_{2}$) treatment. The repair domain of rpS3 was sufficient to exhibit the resistance to UV irradiation and recover cell growth and viability, showing that the repair activity of rpS3 is responsible for the resistance to UV irradiation. Our study suggests that rpS3 is able to process DNA damage in bacteria via its repair domain, showing the resistance to genotoxic stress. This implies that rpS3-like activity could be operative in bacteria.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1779-1783
• /
• 2004

In the present study, we carried out comparative research on the anthraquinones Raman spectrum and on the anthraquinones derivative 1,4-diamino-anthraquinone focusing on change in its intermediate in terms of pH and change in the substituent. WE use the SERS method and employ a silver sol prepared by Creighton et al.'s method. From the analysis of the UV spectrum of the mixture solution of 1,4-diamino-anthraquinone and silver sol, we could see that the 1,4-diamino-anthraquinone physically adsorbs silver sol. In terms of the adsorbing orientation, the adsorption of the nitrogen atom in the amino group is perpendicular to the surface of silver sol according to the surface selection rule. From the structure of the 1,4-diamino-anthraquinone intermediate according to the change of pH, we could see that the C=O bond is strengthened in the acidic state and weakened in the neutral and the alkaline state because of the resonance effect of the amines.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.776-779
• /
• 1998

Second-order rate constants have been measured spectrophotometrically for the addition reaction of a series of alicyclic amines to 3-butyn-2-one to yield their respective enamines at 25.0 'C. The reactivity of the amines increases with increasing the basicity of the amines. However, the Bronsted-type plot obtained exhibits a downward curvature as the basicity of the amines increases, i.e. βnuc decreases from 0.3 for low basic amines (pKa < 9) and to 0.1 for highly basic amines (pKa > 9). Such a curvature in the Bronsted-type plot is clearly indicative of a change in the reaction mechanism or transition state structure. From the corresponding reactions run in D2O, the magnitude of kinetic isotope effect (KIE) has been calculated to be about 0.8 for highly basic amines and 1.21 for weakly basic amines. The difference in the magnitude of KIE also supports a change in the reaction mechanism or transition state structure upon changing the basicity of the amines. Furthermore, the small KIE clearly suggests that H+ transfer is not involved in the rate-determining step, i.e. the addition reaction is considered to proceed via a stepwise mechanism in which the attack of the amines to the acetylene is the rate-determining step. The curvature in the Bronsted-type plot has been attributed to a change in the degree of bond formation between the amine and the acetylene.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1106-1110
• /
• 2000

New 14-membered tetraaza macrocycles 1,8-diallyl-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^2)$ and 1,8-bis(n-propyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^3)$ have been prepared by direct react ion of 2,5,5,7,9,12,12,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^1)with$ allyl bromide or n-propyl bromide. The nickel(II) and copper(II) complexes of $L^2andL^3have$ been prepared. The macrocycles show high copper(II) selectivity against nickel(II) ion in methanol solutions containing water. The wavelengths (ca. 505 nm) of the d-d bands for the nickel(II) complexes are extraordinarily longer than those for the complexes of $L^1and$ other related di-N-alkylated 14-membered tetraaza macrocycles. Crystal structure of $[NiL^2](ClO4)_2$ shows that the average Ni-N bond distance $(1.992\AA)$ of the complex is distinctly longer than those of other related nickel(II) complexes. Effects of the N- and C-substituents on the properties of the macrocyclic compounds are discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.595-605
• /
• 2018

In recent years, researches on organic-inorganic coating films have conducted a nanocomposite system composed of organic resin matrices having excellent flexibility and chemical stability and inorganic materials having excellent mechanical properties. The o-phenylphenoxyethyl acrylate (OPPEA) used as the acrylate monomer has a high refractive index of 1.58, and the bisphenol A ethoxylate diacrylate (BAEDA) has a low refractive index but improves the chemical stability of the organic resin. In addition, zirconia used as an inorganic material exhibits excellent durability and optical properties. In this study, the BAEDA contents in acrylate monomer were controlled to produce a film with suitable optical transparency. And optimum conditions were established by comparing the changes in surface properties of PET films detected with pencil hardness tester, Abbe's refractometer, and UV-vis spectrophotometer. The hydrophobicity and the dispersibility of zirconia in acrylate monomer were much improved after modification with ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS), which is a silane coupling agent. And the existence of ester C=O bond peak at $1716cm^{-1}$ introduced by MPS through FT-IR ATR spectrophotometer confirmed the completion of surface modification of zirconia with MPS. In addition, the presence of silicon atom on the surface modified zirconia was also proved using X-ray fluorescence spectrometer. When the photocurable hybrid coating was prepared by introducing chemically modified zirconia into acrylate monomer, the refractive index of this coated PET film was improved by 1.2%, compared to the only acrylate coated PET film. The homogeneous distribution of zirconia in acrylate coating layer on PET film was also identified through SEM/EDS mapping analysis technique.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.2
• /
• pp.127-131
• /
• 2003

Protein disulfide isomerase (PDI) found in the endoplasmic reticulum (ER) catalyzes disulfide bond exchange and assists in protein folding of newly synthesized proteins. PDI also functions as a molecular chaperone and has been found to be associated with proteins in the ER. In addition, PDI functions as a subunit of two more complex enzyme systems: the prolyl-4-hydroxylase and the triacylglycerol transfer proteins. A cDNA that encodes protein disulfide isomerase was previously isolated from Bombyx mori (bPDI), in which open reading frame of 494 amino acids contained two PDI-typical thioredoxin active site of WCGHCK and an ER retention signal of the KDEL motif at its C-terminal, and we report its functional characterization here. This putative bPDI cDNA is expressed in insect Sf9 cells as a recombinant proteins using baculovirus expression vector system. The bPDI recombinant proteins are successfully recognized by antirat PDI antibody, and shown to be biologically active in vitro by mediating the oxidative refolding of reduced and scrambled RNase. This suggests that bPDI may play an important role in protein folding mechanism of insects.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.116-121
• /
• 1993

A single crystla of zeolite $Na_{78}Rb_{28}-X$ (approximate composition) was prepared by exposing $Na_{92}-X$ at $350^{\circ}C$ to 0.1 Torr of rubidium vapor, and its structure was determined by single-crystal x-ray diffraction methods in the cubic space group, Fd3, ${\alpha}=25.045(4){\AA}$. The structure was refined to the final error indices $R_1=0.082$ and $R_2=0.084$ with 353 for which I>$3{\sigma}(I)$. Only about 28 of the 92 $Na^+$ ions per unit cell were reduced and only about 14 of the 28 $Na^0$ atoms produced were retained within the zeolite. A $Na_5{^{4+}}$ cluster is present within each sodalite cavity. It is a centered tetrahedron (like $CH_4$) with bond $length=2.80(2){\AA}$ and angle tetrahedral by symmetry, and shows the full symmetry of its site. $T_d$, at the center of the sodalite cavity. Each of the four terminal atoms of the $Na_5{^{4+}}$ cluster bond to three framework oxygens at $2.36(2){\AA}$. At the centers of some double 6-rings are sodium atoms which bridge linearly between $Na_5{^{4+}}$ clusters to form agglomerations such as short zig-zag chains $Na_5{^{4+}}$ clusters. Delocalized electrons, located primarily on the sodiums at centers of the sodalite and (likely) double-six-ring cavities, contribute to the stability of the clusters.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.436-440
• /
• 2009

This study demonstrates the use of a chemical lung containing potassium superoxide to convert carbon dioxide in air to oxygen. In order to reduce its extremely high reactivity, potassium superoxide was first mixed with calcium hydroxide and then combined at various ratios with polysiloxane. Silicone polymer used here served as both a water repellent and the polymer matrix. In general, the amount of carbon dioxide captured as well as that of oxygen produced increased as the proportion of potassium superoxide in the chemical lung increased. FT-IR spectroscopy revealed that the Si-O bond in chemical lung appeared at $1,050cm^{-1}$ and absorbance of chemical lung containing higher amounts of silicone was higher than that of chemical lung containing lower amounts. These results indicate that such a chemical lung may also be a useful sorbent for other acid gases, such as sulfur oxides and nitrogen oxides.